[ 0.117723] raid6: sse2x1 6480 MB/s [ 0.134762] raid6: sse2x2 7812 MB/s [ 0.151794] raid6: sse2x4 9355 MB/s [ 0.168834] raid6: avx2x1 12742 MB/s [ 0.185868] raid6: avx2x2 14539 MB/s [ 0.202906] raid6: avx2x4 16929 MB/s [ 0.202908] raid6: using algorithm avx2x4 (16929 MB/s) [ 0.202911] raid6: using avx2x2 recovery algorithm [ 0.202953] ACPI: Added _OSI(Module Device) [ 0.202955] ACPI: Added _OSI(Processor Device) [ 0.202957] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.202959] ACPI: Added _OSI(Processor Aggregator Device) [ 0.213588] ACPI: Executed 18 blocks of module-level executable AML code [ 0.245111] ACPI: Dynamic OEM Table Load: [ 0.245129] ACPI: SSDT 0xFFFF880149444800 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.250263] ACPI: Dynamic OEM Table Load: [ 0.250279] ACPI: SSDT 0xFFFF880149445000 000792 (v01 PmRef ApIst 00003000 INTL 20130927) [ 0.256134] ACPI: Dynamic OEM Table Load: [ 0.256148] ACPI: SSDT 0xFFFF8801493CE400 000119 (v01 PmRef ApCst 00003000 INTL 20130927) [ 0.264163] ACPI: Interpreter enabled [ 0.264173] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580) [ 0.264182] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580) [ 0.264205] ACPI: (supports S0 S3 S4 S5) [ 0.264208] ACPI: Using IOAPIC for interrupt routing [ 0.264232] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.266370] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.266599] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.267060] ACPI: Power Resource [PG00] (on) [ 0.273400] ACPI: Power Resource [PG01] (on) [ 0.278436] ACPI: Power Resource [PG02] (on) [ 0.307370] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.308649] ACPI: Power Resource [FN00] (off) [ 0.308727] ACPI: Power Resource [FN01] (off) [ 0.308802] ACPI: Power Resource [FN02] (off) [ 0.308876] ACPI: Power Resource [FN03] (off) [ 0.308951] ACPI: Power Resource [FN04] (off) [ 0.309958] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.309966] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.310766] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.311292] PCI host bridge to bus 0000:00 [ 0.311296] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.311300] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.311303] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.311306] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.311309] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff] [ 0.311319] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.311546] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.311559] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit] [ 0.311567] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.311573] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.311793] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.311801] pci 0000:00:03.0: reg 0x10: [mem 0xd1030000-0xd1033fff 64bit] [ 0.312038] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.312056] pci 0000:00:14.0: reg 0x10: [mem 0xd1020000-0xd102ffff 64bit] [ 0.312113] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.312293] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.312340] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.312359] pci 0000:00:16.0: reg 0x10: [mem 0xd1035000-0xd103501f 64bit] [ 0.312420] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.312635] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.312651] pci 0000:00:19.0: reg 0x10: [mem 0xd1000000-0xd101ffff] [ 0.312659] pci 0000:00:19.0: reg 0x14: [mem 0xd1038000-0xd1038fff] [ 0.312667] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.312724] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.312901] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.312948] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.313258] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.313272] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.313279] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.313286] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.313297] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.313304] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.313311] pci 0000:00:1f.2: reg 0x24: [mem 0xd1037000-0xd10377ff] [ 0.313346] pci 0000:00:1f.2: PME# supported from D3hot [ 0.313547] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.313561] pci 0000:00:1f.3: reg 0x10: [mem 0xd1034000-0xd10340ff 64bit] [ 0.313580] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.313799] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.313826] pci 0000:00:1f.6: reg 0x10: [mem 0xd1036000-0xd1036fff 64bit] [ 0.314101] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.316261] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.316319] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.316370] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.316419] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.316468] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 0.316517] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.316567] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.316616] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.317139] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.317348] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.317462] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.317467] vgaarb: loaded [ 0.317469] vgaarb: bridge control possible 0000:00:02.0 [ 0.317551] SCSI subsystem initialized [ 0.317600] libata version 3.00 loaded. [ 0.317640] ACPI: bus type USB registered [ 0.317670] usbcore: registered new interface driver usbfs [ 0.317683] usbcore: registered new interface driver hub [ 0.317710] usbcore: registered new device driver usb [ 0.317748] pps_core: LinuxPPS API ver. 1 registered [ 0.317751] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.317759] PTP clock support registered [ 0.317841] PCI: Using ACPI for IRQ routing [ 0.323616] PCI: pci_cache_line_size set to 64 bytes [ 0.323642] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.323644] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.323645] e820: reserve RAM buffer [mem 0xac1dc000-0xafffffff] [ 0.323647] e820: reserve RAM buffer [mem 0xac7ff000-0xafffffff] [ 0.323649] e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff] [ 0.323768] NetLabel: Initializing [ 0.323770] NetLabel: domain hash size = 128 [ 0.323772] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.323786] NetLabel: unlabeled traffic allowed by default [ 0.323904] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.323911] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.325943] Switched to clocksource hpet [ 0.329420] pnp: PnP ACPI init [ 0.329718] system 00:00: [io 0x06a4] has been reserved [ 0.329722] system 00:00: [io 0x06a0] has been reserved [ 0.329727] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.329905] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.329909] system 00:01: [io 0xffff] has been reserved [ 0.329912] system 00:01: [io 0xffff] has been reserved [ 0.329915] system 00:01: [io 0xffff] has been reserved [ 0.329918] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.329922] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.329925] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.329979] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.330014] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.330018] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.330127] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.330201] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.330791] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.330795] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.330798] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.330802] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.330805] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.330808] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved [ 0.330811] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.330815] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.331933] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.331937] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.331940] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.331951] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.331956] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.331959] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.331962] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.331966] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.331969] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 0.331972] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.331976] system 00:07: [mem 0xb0010000-0xb001ffff] has been reserved [ 0.331980] system 00:07: [mem 0xb0000000-0xb000ffff] has been reserved [ 0.331983] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.332226] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.332230] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.332364] pnp: PnP ACPI: found 9 devices [ 0.338979] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.338984] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.338986] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.338989] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff] [ 0.339015] NET: Registered protocol family 2 [ 0.339219] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.339290] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.339354] TCP: Hash tables configured (established 32768 bind 32768) [ 0.339376] TCP: reno registered [ 0.339386] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.339403] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.339457] NET: Registered protocol family 1 [ 0.339536] RPC: Registered named UNIX socket transport module. [ 0.339542] RPC: Registered udp transport module. [ 0.339544] RPC: Registered tcp transport module. [ 0.339546] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.339566] pci 0000:00:02.0: Boot video device [ 0.339656] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.339659] pci 0000:00:14.0: PCI INT A: no GSI [ 0.339742] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.339759] PCI: CLS 0 bytes, default 64 [ 0.790441] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.790450] software IO TLB [mem 0xa81dc000-0xac1dc000] (64MB) mapped at [ffff8800a81dc000-ffff8800ac1dbfff] [ 0.790574] Simple Boot Flag at 0x47 set to 0x80 [ 0.791320] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.791357] audit: initializing netlink subsys (disabled) [ 0.791367] audit: type=2000 audit(1410271149.751:1): initialized [ 0.791569] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.793266] VFS: Disk quotas dquot_6.5.2 [ 0.793304] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.793929] NFS: Registering the id_resolver key type [ 0.793936] Key type id_resolver registered [ 0.793938] Key type id_legacy registered [ 0.793944] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.794106] fuse init (API version 7.23) [ 0.794216] msgmni has been set to 7704 [ 0.794481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.794487] io scheduler noop registered [ 0.794492] io scheduler deadline registered [ 0.794523] io scheduler cfq registered (default) [ 0.794608] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.794720] ACPI: Fan [FAN0] (off) [ 0.794746] ACPI: Fan [FAN1] (off) [ 0.794771] ACPI: Fan [FAN2] (off) [ 0.794795] ACPI: Fan [FAN3] (off) [ 0.794819] ACPI: Fan [FAN4] (off) [ 0.795148] Monitor-Mwait will be used to enter C-1 state [ 0.796763] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.796767] ACPI: Thermal Zone [TZ00] (48 C) [ 0.797446] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.797449] ACPI: Thermal Zone [TZ01] (48 C) [ 0.797502] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.818190] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.818711] Non-volatile memory driver v1.3 [ 0.818723] Linux agpgart interface v0.103 [ 0.820052] brd: module loaded [ 0.820117] Loading iSCSI transport class v2.0-870. [ 0.820278] iscsi: registered transport (tcp) [ 0.820379] Adaptec aacraid driver 1.2-0[30300]-ms [ 0.820405] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.820500] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k. [ 0.820544] iscsi: registered transport (qla4xxx) [ 0.820560] QLogic iSCSI HBA Driver [ 0.820606] DC390: clustering now enabled by default. If you get problems load [ 0.820610] with "disable_clustering=1" and report to maintainers [ 0.820649] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.820700] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.820721] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.820768] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.820791] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.820791] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.820872] SCSI Media Changer driver v0.25 [ 0.820904] ahci 0000:00:1f.2: version 3.0 [ 0.821041] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 0.821082] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode [ 0.821090] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.821548] scsi host0: ahci [ 0.821638] scsi host1: ahci [ 0.821715] scsi host2: ahci [ 0.821789] scsi host3: ahci [ 0.821844] ata1: DUMMY [ 0.821847] ata2: SATA max UDMA/133 abar m2048@0xd1037000 port 0xd1037180 irq 40 [ 0.821851] ata3: DUMMY [ 0.821853] ata4: DUMMY [ 0.822640] cnic: QLogic NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 0.822670] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 0.822757] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.822761] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.822786] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.822788] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.822810] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.822813] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 0.822954] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.822970] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 0.987743] e1000e 0000:00:19.0 eth0: registered PHC clock [ 0.987749] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4 [ 0.987756] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.987785] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.987803] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.13-k [ 0.987807] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.987846] usbcore: registered new interface driver catc [ 0.987865] usbcore: registered new interface driver kaweth [ 0.987869] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.987886] usbcore: registered new interface driver pegasus [ 0.987902] usbcore: registered new interface driver rtl8150 [ 0.987921] usbcore: registered new interface driver asix [ 0.987937] usbcore: registered new interface driver ax88179_178a [ 0.987954] usbcore: registered new interface driver cdc_ether [ 0.987973] usbcore: registered new interface driver dm9601 [ 0.987989] usbcore: registered new interface driver gl620a [ 0.988007] usbcore: registered new interface driver net1080 [ 0.988023] usbcore: registered new interface driver plusb [ 0.988039] usbcore: registered new interface driver rndis_host [ 0.988055] usbcore: registered new interface driver cdc_subset [ 0.988071] usbcore: registered new interface driver zaurus [ 0.988089] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.988115] usbcore: registered new interface driver cdc_ncm [ 0.988216] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.988222] ehci-pci: EHCI PCI platform driver [ 0.988257] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.988265] ohci-pci: OHCI PCI platform driver [ 0.988297] uhci_hcd: USB Universal Host Controller Interface driver [ 0.988399] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 0.988402] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 0.988423] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.988469] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.988561] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.988575] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 0.988631] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.988635] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.988638] usb usb1: Product: xHCI Host Controller [ 0.988641] usb usb1: Manufacturer: Linux 3.17.0-rc2_drm-intel-nightly_51c49e_20140908+ xhci_hcd [ 0.988644] usb usb1: SerialNumber: 0000:00:14.0 [ 0.988757] hub 1-0:1.0: USB hub found [ 0.988773] hub 1-0:1.0: 11 ports detected [ 0.992067] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.992107] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.992146] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.992150] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.992153] usb usb2: Product: xHCI Host Controller [ 0.992155] usb usb2: Manufacturer: Linux 3.17.0-rc2_drm-intel-nightly_51c49e_20140908+ xhci_hcd [ 0.992159] usb usb2: SerialNumber: 0000:00:14.0 [ 0.992264] hub 2-0:1.0: USB hub found [ 0.992275] hub 2-0:1.0: 4 ports detected [ 0.993099] usb: failed to peer usb2-port3 and usb1-port3 by location (usb2-port3:none) (usb1-port3:usb2-port2) [ 0.993103] usb usb2-port3: failed to peer to usb1-port3 (-16) [ 0.993105] usb: port power management may be unreliable [ 0.993586] usbcore: registered new interface driver usb-storage [ 0.993635] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.993638] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.994054] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.994127] mousedev: PS/2 mouse device common for all mice [ 0.994225] rtc_cmos 00:02: RTC can wake from S4 [ 0.994381] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.994412] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.994426] i2c /dev entries driver [ 0.994453] hidraw: raw HID events driver (C) Jiri Kosina [ 0.994688] usbcore: registered new interface driver usbhid [ 0.994690] usbhid: USB HID core driver [ 0.994757] TCP: cubic registered [ 0.994761] Initializing XFRM netlink socket [ 0.994767] NET: Registered protocol family 17 [ 0.994790] Key type dns_resolver registered [ 0.995181] registered taskstats version 1 [ 0.995650] Btrfs loaded [ 0.995914] Magic number: 14:514:988 [ 0.995919] machinecheck machinecheck1: hash matches [ 0.996035] PM: Hibernation image not present or could not be loaded. [ 0.996049] Warning: unable to open an initial console. [ 1.126392] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.126644] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133 [ 1.126649] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.126936] ata2.00: configured for UDMA/133 [ 1.127037] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5 [ 1.127229] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.127235] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.127255] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.127311] sd 1:0:0:0: [sda] Write Protect is off [ 1.127318] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.127346] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.128757] sda: sda1 sda2 sda3 [ 1.129012] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.133292] Freeing unused kernel memory: 23300K (ffffffff81c60000 - ffffffff83321000) [ 1.165041] dracut: dracut-018-35.git20120510.fc17 [ 1.189823] udevd[1432]: starting version 182 [ 1.205497] [drm] Initialized drm 1.1.0 20060810 [ 1.206555] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.206793] ACPI: Lid Switch [LID0] [ 1.206878] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.206927] ACPI: Power Button [PWRB] [ 1.206999] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 1.207043] ACPI: Sleep Button [SLPB] [ 1.207121] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.207163] ACPI: Power Button [PWRF] [ 1.210970] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x08 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 1.210989] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH [ 1.211057] [drm] Memory usable by graphics device = 4096M [ 1.211067] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.211069] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.211070] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 1.211072] [drm] Replacing VGA console driver [ 1.212068] [drm:intel_opregion_setup] graphic opregion physical addr: 0xac776018 [ 1.212079] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.212081] [drm:intel_opregion_setup] SWSCI supported [ 1.217443] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 1.217446] [drm:intel_opregion_setup] ASLE supported [ 1.217551] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 1.217564] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.217570] [drm] Driver supports precise vblank timestamp query. [ 1.217575] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.217578] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 1.217581] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.217583] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.217586] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 1.217589] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.217594] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa [ 1.217596] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c [ 1.217600] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 1.217603] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.217606] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.217608] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.217610] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.217613] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.217615] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.217616] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.217618] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 1.217620] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.217621] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3 [ 1.217687] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.217693] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ae000000 [ 1.217696] [drm:intel_display_power_get] enabling always-on [ 1.217697] [drm:intel_display_power_get] enabling display [ 1.217701] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.217772] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.217774] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 1.217776] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 1.217777] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 1.217779] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.217781] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.217782] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 1.217784] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 1.217785] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 1.217786] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.217788] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.217789] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 1.217791] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 1.217792] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 1.217794] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.217796] [drm:intel_modeset_init] 3 display pipes available. [ 1.217809] [drm:intel_ddi_pll_init] CDCLK running at 675000KHz [ 1.218116] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.218180] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 1.218183] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.218185] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.218187] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.218189] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.218284] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 1.218291] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.218565] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00 [ 1.218734] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 1.241124] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.241125] [drm:intel_dp_drrs_init] VBT doesn't support DRRS [ 1.241158] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered [ 1.241170] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.241223] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.246452] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled [ 1.246455] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled [ 1.246457] [drm:intel_modeset_readout_hw_state] [CRTC:16] hw state readout: disabled [ 1.246459] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0 [ 1.246461] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0 [ 1.246465] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: enabled, pipe A [ 1.246467] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: disabled, pipe A [ 1.246469] [drm:intel_modeset_readout_hw_state] [ENCODER:29:DP MST-29] hw state readout: disabled, pipe A [ 1.246470] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DP MST-30] hw state readout: disabled, pipe B [ 1.246472] [drm:intel_modeset_readout_hw_state] [ENCODER:31:DP MST-31] hw state readout: disabled, pipe C [ 1.246474] [drm:intel_modeset_readout_hw_state] [ENCODER:34:TMDS-34] hw state readout: disabled, pipe A [ 1.246476] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:eDP-1] hw state readout: enabled [ 1.246478] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:DP-1] hw state readout: disabled [ 1.246480] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-1] hw state readout: disabled [ 1.246482] [drm:intel_modeset_readout_hw_state] [CONNECTOR:35:HDMI-A-2] hw state readout: disabled [ 1.246485] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A [ 1.246486] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.246488] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.246490] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.246492] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.246494] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.246495] [drm:intel_dump_pipe_config] requested mode: [ 1.246498] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 1.246499] [drm:intel_dump_pipe_config] adjusted mode: [ 1.246501] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.246504] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 1.246505] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.246506] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.246508] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.246510] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.246511] [drm:intel_dump_pipe_config] ips: 0 [ 1.246512] [drm:intel_dump_pipe_config] double wide: 0 [ 1.246515] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 1.246517] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 1.246520] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 1.246522] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B [ 1.246523] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.246524] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.246526] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.246528] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.246530] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.246531] [drm:intel_dump_pipe_config] requested mode: [ 1.246533] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.246534] [drm:intel_dump_pipe_config] adjusted mode: [ 1.246536] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.246539] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.246540] [drm:intel_dump_pipe_config] port clock: 0 [ 1.246541] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.246543] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.246544] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.246546] [drm:intel_dump_pipe_config] ips: 0 [ 1.246547] [drm:intel_dump_pipe_config] double wide: 0 [ 1.246549] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 1.246550] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 1.246553] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 1.246555] [drm:intel_dump_pipe_config] [CRTC:16][setup_hw_state] config for pipe C [ 1.246556] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.246557] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.246559] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.246561] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.246563] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.246564] [drm:intel_dump_pipe_config] requested mode: [ 1.246566] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.246567] [drm:intel_dump_pipe_config] adjusted mode: [ 1.246569] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.246571] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.246572] [drm:intel_dump_pipe_config] port clock: 0 [ 1.246574] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.246575] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.246577] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.246578] [drm:intel_dump_pipe_config] ips: 0 [ 1.246579] [drm:intel_dump_pipe_config] double wide: 0 [ 1.246584] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 1.246587] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 1.246589] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 1.246590] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 1.246592] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 1.246593] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 1.246594] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 1.246596] [drm:check_crtc_state] [CRTC:8] [ 1.246602] [drm:check_crtc_state] [CRTC:12] [ 1.246604] [drm:check_crtc_state] [CRTC:16] [ 1.246606] [drm:check_shared_dpll_state] WRPLL 1 [ 1.246608] [drm:check_shared_dpll_state] WRPLL 2 [ 1.246612] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.246614] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.246618] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.246622] [drm:intel_alloc_plane_obj] plane fb obj ffff880144538000 [ 1.246625] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.246627] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.249551] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 1.249553] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 1.249588] [drm:i915_gem_context_init] HW context support initialized [ 1.249597] [drm:init_status_page] render ring hws offset: 0x007fb000 [ 1.249670] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0081c000 [ 1.249676] [drm:init_status_page] bsd ring hws offset: 0x0081d000 [ 1.249733] [drm:init_status_page] blitter ring hws offset: 0x0083e000 [ 1.249783] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000 [ 1.249837] [drm:bdw_init_workarounds] Number of Workarounds applied: 8 [ 1.249992] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 1.249996] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 1.250009] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.250015] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 1.250020] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.250023] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 1.250025] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 1.250027] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 1.250033] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 1.250035] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 1.250038] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 1.250195] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.250198] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.250201] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 1.250203] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 1.250205] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 1.250361] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.250363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.250365] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 1.250367] [drm:drm_setup_crtcs] [ 1.250370] [drm:drm_enable_connectors] connector 19 enabled? yes [ 1.250372] [drm:drm_enable_connectors] connector 28 enabled? no [ 1.250374] [drm:drm_enable_connectors] connector 32 enabled? no [ 1.250376] [drm:drm_enable_connectors] connector 35 enabled? no [ 1.250379] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.250381] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 1.250384] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:8]: 1920x1080 [ 1.250386] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.250389] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.250391] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.250393] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 8 [ 1.250396] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.250399] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 1.250405] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400 [ 1.251250] [drm:intelfb_create] allocated 1920x1080 fb: 0x00881000, bo ffff880002bdc000 [ 1.251323] fbcon: inteldrmfb (fb0) is primary device [ 1.251404] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 1.251406] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 1.251408] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.251410] [drm:drm_mode_debug_printmodeline] Modeline 37:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.251411] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=1 [ 1.251412] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 1.251415] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.251416] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains [ 1.251429] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 1.251430] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 1.251431] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 1.251437] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 1.251438] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 1.251440] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.251442] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 1.251442] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.251443] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.251444] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.251446] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.251447] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.251448] [drm:intel_dump_pipe_config] requested mode: [ 1.251450] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.251450] [drm:intel_dump_pipe_config] adjusted mode: [ 1.251452] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.251455] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 1.251456] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.251457] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.251458] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.251459] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.251460] [drm:intel_dump_pipe_config] ips: 1 [ 1.251461] [drm:intel_dump_pipe_config] double wide: 0 [ 1.251473] [drm:intel_edp_backlight_off] [ 1.256753] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.256833] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.256952] [drm] Initialized i915 1.6.0 20140822 for 0000:00:02.0 on minor 0 [ 1.344516] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.452553] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.462720] [drm:intel_edp_panel_off] Turn eDP power off [ 1.462723] [drm:wait_panel_off] Wait for panel power off time [ 1.462726] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1.512824] usb 1-1: New USB device found, idVendor=07a6, idProduct=8515 [ 1.512825] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.512827] usb 1-1: Product: USB To LAN Converter [ 1.512828] usb 1-1: Manufacturer: ADMtek [ 1.512829] usb 1-1: SerialNumber: 0001 [ 1.513646] pegasus 1-1:1.0: setup Pegasus II specific registers [ 1.517566] [drm:wait_panel_status] Wait complete [ 1.517572] [drm:intel_update_fbc] no output, disabling [ 1.517576] [drm:intel_display_power_put] disabling display [ 1.517578] [drm:hsw_set_power_well] Requesting to disable the power well [ 1.517592] [drm:intel_edp_panel_on] Turn eDP power on [ 1.517595] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.614980] pegasus 1-1:1.0: eth1, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:e8:00:05:c8 [ 1.792730] tsc: Refined TSC clocksource calibration: 2095.152 MHz [ 2.063884] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 2.063885] [drm:wait_panel_status] Wait complete [ 2.063888] [drm:wait_panel_on] Wait for panel power on [ 2.063891] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control abcd0003 [ 2.240350] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 [ 2.272977] [drm:wait_panel_status] Wait complete [ 2.272984] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 2.272990] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 2.274065] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.274523] [drm:intel_dp_start_link_train] clock recovery OK [ 2.275281] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 2.275522] [drm:intel_edp_backlight_on] [ 2.275523] [drm:intel_panel_enable_backlight] pipe A [ 2.275528] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 2.275533] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 2.275539] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680 [ 2.310995] [drm:intel_update_fbc] disabled per chip default [ 2.310999] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 2.311001] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 2.311002] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 2.311004] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 2.311004] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 2.311005] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 2.311006] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 2.311007] [drm:check_crtc_state] [CRTC:8] [ 2.311013] [drm:check_crtc_state] [CRTC:12] [ 2.311014] [drm:check_crtc_state] [CRTC:16] [ 2.311015] [drm:check_shared_dpll_state] WRPLL 1 [ 2.311016] [drm:check_shared_dpll_state] WRPLL 2 [ 2.311028] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 2.311030] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 2.311031] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.311032] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 2.311034] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 2.311035] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.311040] Console: switching to colour frame buffer device 240x67 [ 2.311048] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.311049] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.311051] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.319492] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.319529] i915 0000:00:02.0: registered panic notifier [ 2.323141] dracut: Starting plymouth daemon [ 2.329901] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.329905] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.329906] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.343909] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.343912] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.343914] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.413592] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.413662] EXT4-fs (sda2): write access will be enabled during recovery [ 2.424141] EXT4-fs (sda2): recovery complete [ 2.424386] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.432636] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.432826] ACPI: AC Adapter [ADP1] (on-line) [ 2.452986] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.453106] ACPI: Battery Slot [BAT0] (battery present) [ 2.453224] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.453321] ACPI: Battery Slot [BAT1] (battery absent) [ 2.453475] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.453571] ACPI: Battery Slot [BAT2] (battery absent) [ 2.455243] dracut: Checking ext4: /dev/sda2 [ 2.455479] dracut: issuing e2fsck -a /dev/sda2 [ 2.460562] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 2.460750] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258) [ 2.460915] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.463883] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 2.464093] [drm:intel_display_power_get] enabling display [ 2.464098] [drm:hsw_set_power_well] Enabling power well [ 2.464133] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X [ 2.465110] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 2.476706] dracut: /dev/sda2: clean, 950792/13598720 files, 26839495/54372608 blocks [ 2.477724] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro [ 2.484722] iTCO_vendor_support: vendor-support=0 [ 2.484857] ppdev: user-space parallel port driver [ 2.484888] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.484920] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 2.485044] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.490363] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.490367] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.490370] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.491454] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 2.495874] dracut: Mounted root filesystem /dev/sda2 [ 2.510087] device-mapper: uevent: version 1.0.3 [ 2.512601] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.568306] dracut: Switching root [ 2.601269] random: init urandom read with 96 bits of entropy available [ 2.633365] init: ureadahead main process (2742) terminated with status 5 [ 2.691810] random: nonblocking pool is initialized [ 2.747250] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.793283] Switched to clocksource tsc [ 3.754018] systemd-udevd[2859]: starting version 204 [ 3.836537] systemd-udevd[3508]: could not open moddep file '/lib/modules/3.17.0-rc2_drm-intel-nightly_51c49e_20140908+/modules.dep.bin' [ 3.853387] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 3.853390] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 3.853392] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.903897] [drm:i915_gem_open] [ 3.903932] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 3.903937] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 3.903940] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.903944] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 3.903947] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 3.903964] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.903968] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 3.904539] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 3.904543] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.904563] [drm:i915_gem_open] [ 3.904619] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 3.904624] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 3.904634] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 3.904638] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 3.904640] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 3.904654] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3.904659] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 3.904664] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.904668] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 3.904672] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 3.908235] e1000e 0000:00:19.0 eth3: renamed from eth0 [ 3.918168] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 3.918174] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 3.918177] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 3.918185] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 3.918190] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 3.918192] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 3.918194] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 3.918198] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 3.918203] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 3.918205] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 3.918208] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 3.918726] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 3.918731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 3.918768] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 3.918774] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 3.918777] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 3.918779] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 3.918944] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 3.918947] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 3.918950] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 3.918957] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 3.918960] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 3.918962] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 3.920160] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.920165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 3.920169] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 3.920177] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 3.920180] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 3.920182] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 3.920404] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.920407] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 3.920411] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 3.920432] [drm:drm_mode_addfb] [FB:36] [ 3.973421] pegasus 1-1:1.0 eth6: renamed from eth1 [ 3.981786] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.983965] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.002938] Adding 16440316k swap on /dev/sda3. Priority:-1 extents:1 across:16440316k SS [ 4.010645] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.012493] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.017370] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 4.061846] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.064536] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.111642] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.115059] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.170276] init: failsafe main process (3780) killed by TERM signal [ 4.184797] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory [ 4.197663] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.203383] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.223970] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 4.223979] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 4.326532] init: avahi-cups-reload main process (3922) terminated with status 1 [ 4.544310] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 4.645217] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 5.071657] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 5.071663] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 5.071666] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 5.071669] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 5.071671] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 5.071672] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 5.071674] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 5.071676] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 5.071677] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 5.071707] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 5.071709] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 5.071710] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 427.761330] kms_plane: executing [ 427.761429] [drm:i915_gem_open] [ 427.761658] [drm:i915_gem_open] [ 427.761716] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.761724] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.761924] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.761927] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.761931] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 427.761933] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 427.761935] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 427.761947] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 427.761950] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 427.761954] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 427.761956] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 427.761959] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 427.761970] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.761972] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.761975] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 427.761976] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 427.761978] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 427.761983] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 427.761985] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 427.761986] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 427.761987] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 427.761991] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 427.761995] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.761997] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.761999] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 427.762001] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 427.762003] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 427.762163] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 427.762165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 427.762167] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 427.762169] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 427.762170] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 427.762172] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 427.762328] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 427.762329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 427.762331] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 427.762334] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.762336] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.762338] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 427.762340] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 427.762341] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 427.762499] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 427.762500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 427.762502] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 427.762503] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 427.762505] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 427.762506] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 427.762665] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 427.762666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 427.762668] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 427.762694] kms_plane: starting subtest plane-position-covered-pipe-C-plane-1 [ 427.762733] [drm:pipe_crc_set_source] collecting CRCs for pipe C, pf [ 427.762737] [drm:pipe_crc_set_source] stopping CRCs for pipe C [ 427.762753] [drm:add_framebuffer_internal] [FB:36] [ 427.769328] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.769333] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.769336] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 427.769339] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 427.769341] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 427.769354] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 427.769358] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 427.769361] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 427.769364] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 427.769366] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 427.769373] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.769376] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.769378] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 427.769380] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 427.769382] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 427.769386] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 427.769388] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 427.769389] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 427.769391] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 427.769395] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 427.769398] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.769400] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.769402] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 427.769404] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 427.769406] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 427.769568] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 427.769570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 427.769572] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 427.769576] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 427.769577] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 427.769579] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 427.769730] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 427.769732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 427.769733] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 427.769738] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.769741] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 427.769743] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 427.769745] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 427.769746] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 427.769910] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 427.769912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 427.769917] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 427.769919] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 427.769921] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 427.769926] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 427.770088] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 427.770091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 427.770094] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 427.770104] [drm:drm_mode_setcrtc] [CRTC:16] [ 427.770108] [drm:drm_mode_setcrtc] [CONNECTOR:19:eDP-1] [ 427.770112] [drm:intel_crtc_set_config] [CRTC:16] [FB:36] #connectors=1 (x y) (0 0) [ 427.770115] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 427.770117] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 427.770122] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 427.770126] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 427.770129] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=1, fb_changed=0 [ 427.770133] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:16] [ 427.770135] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 427.770138] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 427.770140] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 427.770144] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 4, prepare: 4, disable: 1 [ 427.770147] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains [ 427.770152] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 427.770154] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 427.770157] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 427.770164] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 427.770167] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 427.770171] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 427.770174] [drm:intel_dump_pipe_config] [CRTC:16][modeset] config for pipe C [ 427.770176] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 427.770178] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 427.770181] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 427.770185] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 427.770188] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 427.770190] [drm:intel_dump_pipe_config] requested mode: [ 427.770194] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 427.770196] [drm:intel_dump_pipe_config] adjusted mode: [ 427.770200] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 427.770204] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 427.770207] [drm:intel_dump_pipe_config] port clock: 270000 [ 427.770209] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 427.770212] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 427.770215] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 427.770217] [drm:intel_dump_pipe_config] ips: 0 [ 427.770219] [drm:intel_dump_pipe_config] double wide: 0 [ 427.787781] [drm:intel_edp_backlight_off] [ 427.988883] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 428.004892] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 428.004899] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 428.005057] [drm:intel_edp_panel_off] Turn eDP power off [ 428.005061] [drm:wait_panel_off] Wait for panel power off time [ 428.005068] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 428.059917] [drm:wait_panel_status] Wait complete [ 428.059925] [drm:intel_update_fbc] no output, disabling [ 428.063355] [drm:intel_edp_panel_on] Turn eDP power on [ 428.063359] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 428.606203] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 428.606205] [drm:wait_panel_status] Wait complete [ 428.606208] [drm:wait_panel_on] Wait for panel power on [ 428.606212] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 428.815307] [drm:wait_panel_status] Wait complete [ 428.815310] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 428.815317] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 428.816372] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 428.816818] [drm:intel_dp_start_link_train] clock recovery OK [ 428.817566] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 428.817800] [drm:intel_edp_backlight_on] [ 428.817802] [drm:intel_panel_enable_backlight] pipe C [ 428.817809] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 428.817815] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 428.817819] [drm:ironlake_update_primary_plane] Writing base 0106A000 00000000 0 0 7680 [ 428.835317] [drm:intel_update_fbc] disabled per chip default [ 428.835321] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 428.835324] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 428.835326] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 428.835328] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 428.835330] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 428.835331] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 428.835332] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 428.835334] [drm:check_crtc_state] [CRTC:8] [ 428.835336] [drm:check_crtc_state] [CRTC:12] [ 428.835338] [drm:check_crtc_state] [CRTC:16] [ 428.835346] [drm:check_shared_dpll_state] WRPLL 1 [ 428.835347] [drm:check_shared_dpll_state] WRPLL 2 [ 431.012443] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 431.012449] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 431.836978] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 431.836979] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 431.836981] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0 [ 431.836982] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 431.836983] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 431.836984] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 431.836985] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 431.836986] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 4 [ 431.836988] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains [ 431.836990] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 431.836990] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 431.836991] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 431.836996] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 431.836997] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 431.836998] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 431.836999] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 431.837000] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 431.837001] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 431.837002] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 431.837004] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 431.837005] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 431.837005] [drm:intel_dump_pipe_config] requested mode: [ 431.837008] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 431.837008] [drm:intel_dump_pipe_config] adjusted mode: [ 431.837010] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 431.837012] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 431.837012] [drm:intel_dump_pipe_config] port clock: 270000 [ 431.837013] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 431.837014] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 431.837015] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 431.837016] [drm:intel_dump_pipe_config] ips: 1 [ 431.837017] [drm:intel_dump_pipe_config] double wide: 0 [ 431.837022] [drm:intel_edp_backlight_off] [ 432.037971] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 432.053984] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 432.053990] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 432.054139] [drm:intel_edp_panel_off] Turn eDP power off [ 432.054142] [drm:wait_panel_off] Wait for panel power off time [ 432.054145] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 432.109008] [drm:wait_panel_status] Wait complete [ 432.109014] [drm:intel_update_fbc] no output, disabling [ 432.109029] [drm:intel_edp_panel_on] Turn eDP power on [ 432.109032] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 432.655294] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 432.688308] [drm:wait_panel_status] Wait complete [ 432.688311] [drm:wait_panel_on] Wait for panel power on [ 432.688313] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 432.897416] [drm:wait_panel_status] Wait complete [ 432.897418] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 432.897424] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 432.898476] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 432.898923] [drm:intel_dp_start_link_train] clock recovery OK [ 432.899670] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 432.899902] [drm:intel_edp_backlight_on] [ 432.899903] [drm:intel_panel_enable_backlight] pipe A [ 432.899909] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 432.899914] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 432.899917] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680 [ 432.935433] [drm:intel_update_fbc] disabled per chip default [ 432.935436] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 432.935439] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 432.935440] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 432.935442] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 432.935442] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 432.935443] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 432.935443] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 432.935444] [drm:check_crtc_state] [CRTC:8] [ 432.935450] [drm:check_crtc_state] [CRTC:12] [ 432.935451] [drm:check_crtc_state] [CRTC:16] [ 432.935453] [drm:check_shared_dpll_state] WRPLL 1 [ 432.935454] [drm:check_shared_dpll_state] WRPLL 2 [ 432.935455] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 432.935457] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 432.935458] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 432.935459] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 432.935460] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 432.935461] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 432.946080] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 432.946085] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 432.946087] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 432.946090] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 432.946092] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 432.946094] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 432.946095] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 432.946097] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 432.946099] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 435.062538] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 435.062546] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 466.418765] kms_plane: executing [ 466.418845] [drm:i915_gem_open] [ 466.419063] [drm:i915_gem_open] [ 466.419120] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.419132] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.419282] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.419285] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.419288] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 466.419290] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 466.419292] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 466.419303] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 466.419306] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 466.419309] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 466.419312] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 466.419314] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 466.419325] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.419328] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.419330] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 466.419332] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 466.419333] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 466.419338] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 466.419340] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 466.419341] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 466.419343] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 466.419346] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 466.419350] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.419353] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.419355] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 466.419357] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 466.419358] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 466.419513] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 466.419515] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 466.419517] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 466.419519] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 466.419520] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 466.419522] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 466.419679] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 466.419680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 466.419682] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 466.419685] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.419688] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.419690] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 466.419691] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 466.419693] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 466.419853] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 466.419854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 466.419856] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 466.419859] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 466.419861] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 466.419862] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 466.420020] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 466.420022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 466.420023] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 466.420051] kms_plane: starting subtest plane-position-covered-pipe-C-plane-2 [ 466.420089] [drm:pipe_crc_set_source] collecting CRCs for pipe C, pf [ 466.420093] [drm:pipe_crc_set_source] stopping CRCs for pipe C [ 466.420104] [drm:add_framebuffer_internal] [FB:36] [ 466.424249] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.424253] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.424256] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 466.424258] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 466.424260] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 466.424268] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 466.424271] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 466.424274] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 466.424277] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 466.424279] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 466.424286] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.424289] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.424291] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 466.424293] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 466.424294] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 466.424299] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 466.424300] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 466.424302] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 466.424303] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 466.424307] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 466.424310] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.424312] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.424315] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 466.424316] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 466.424318] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 466.424478] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 466.424480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 466.424482] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 466.424484] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 466.424485] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 466.424486] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 466.424637] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 466.424638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 466.424640] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 466.424643] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.424646] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 466.424648] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 466.424649] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 466.424651] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 466.424809] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 466.424812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 466.424815] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 466.424820] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 466.424823] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 466.424825] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 466.424985] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 466.424986] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 466.424988] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 466.424993] [drm:drm_mode_setcrtc] [CRTC:16] [ 466.424996] [drm:drm_mode_setcrtc] [CONNECTOR:19:eDP-1] [ 466.424999] [drm:intel_crtc_set_config] [CRTC:16] [FB:36] #connectors=1 (x y) (0 0) [ 466.425001] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 466.425003] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=1, fb_changed=0 [ 466.425005] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:16] [ 466.425006] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 466.425008] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 466.425009] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 466.425012] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 4, prepare: 4, disable: 1 [ 466.425014] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains [ 466.425017] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 466.425018] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 466.425020] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 466.425025] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 466.425027] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 466.425029] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 466.425031] [drm:intel_dump_pipe_config] [CRTC:16][modeset] config for pipe C [ 466.425032] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 466.425034] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 466.425036] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 466.425038] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 466.425040] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 466.425041] [drm:intel_dump_pipe_config] requested mode: [ 466.425044] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 466.425045] [drm:intel_dump_pipe_config] adjusted mode: [ 466.425047] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 466.425050] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 466.425051] [drm:intel_dump_pipe_config] port clock: 270000 [ 466.425052] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 466.425054] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 466.425056] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 466.425057] [drm:intel_dump_pipe_config] ips: 0 [ 466.425058] [drm:intel_dump_pipe_config] double wide: 0 [ 466.434747] [drm:intel_edp_backlight_off] [ 466.635846] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 466.651858] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 466.651865] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 466.652015] [drm:intel_edp_panel_off] Turn eDP power off [ 466.652019] [drm:wait_panel_off] Wait for panel power off time [ 466.652022] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 466.706882] [drm:wait_panel_status] Wait complete [ 466.706890] [drm:intel_update_fbc] no output, disabling [ 466.710316] [drm:intel_edp_panel_on] Turn eDP power on [ 466.710320] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 467.253170] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 467.297187] [drm:wait_panel_status] Wait complete [ 467.297191] [drm:wait_panel_on] Wait for panel power on [ 467.297194] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 467.506295] [drm:wait_panel_status] Wait complete [ 467.506298] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 467.506305] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 467.507359] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 467.507806] [drm:intel_dp_start_link_train] clock recovery OK [ 467.508554] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 467.508788] [drm:intel_edp_backlight_on] [ 467.508790] [drm:intel_panel_enable_backlight] pipe C [ 467.508797] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 467.508802] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 467.508807] [drm:ironlake_update_primary_plane] Writing base 0107D000 00000000 0 0 7680 [ 467.526304] [drm:intel_update_fbc] disabled per chip default [ 467.526308] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 467.526311] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 467.526313] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 467.526315] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 467.526316] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 467.526317] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 467.526319] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 467.526320] [drm:check_crtc_state] [CRTC:8] [ 467.526323] [drm:check_crtc_state] [CRTC:12] [ 467.526324] [drm:check_crtc_state] [CRTC:16] [ 467.526332] [drm:check_shared_dpll_state] WRPLL 1 [ 467.526334] [drm:check_shared_dpll_state] WRPLL 2 [ 469.656407] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 469.656413] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 470.527963] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 470.527964] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 470.527966] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0 [ 470.527967] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 470.527968] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 470.527969] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 470.527970] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 470.527971] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 4 [ 470.527972] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains [ 470.527974] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 470.527975] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 470.527976] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 470.527980] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 470.527981] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 470.527982] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 470.527984] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 470.527984] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 470.527985] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 470.527986] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 470.527988] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 470.527989] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 470.527990] [drm:intel_dump_pipe_config] requested mode: [ 470.527992] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 470.527992] [drm:intel_dump_pipe_config] adjusted mode: [ 470.527994] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 470.527996] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 470.527996] [drm:intel_dump_pipe_config] port clock: 270000 [ 470.527997] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 470.527998] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 470.527999] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 470.528000] [drm:intel_dump_pipe_config] ips: 1 [ 470.528000] [drm:intel_dump_pipe_config] double wide: 0 [ 470.528005] [drm:intel_edp_backlight_off] [ 470.728961] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 470.744972] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 470.744978] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 470.745126] [drm:intel_edp_panel_off] Turn eDP power off [ 470.745129] [drm:wait_panel_off] Wait for panel power off time [ 470.745132] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 470.799997] [drm:wait_panel_status] Wait complete [ 470.800002] [drm:intel_update_fbc] no output, disabling [ 470.800017] [drm:intel_edp_panel_on] Turn eDP power on [ 470.800020] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 471.346285] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 471.346287] [drm:wait_panel_status] Wait complete [ 471.346289] [drm:wait_panel_on] Wait for panel power on [ 471.346292] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 471.555387] [drm:wait_panel_status] Wait complete [ 471.555389] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 471.555395] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 471.556449] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 471.556895] [drm:intel_dp_start_link_train] clock recovery OK [ 471.557644] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 471.557876] [drm:intel_edp_backlight_on] [ 471.557877] [drm:intel_panel_enable_backlight] pipe A [ 471.557883] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 471.557888] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 471.557891] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680 [ 471.593404] [drm:intel_update_fbc] disabled per chip default [ 471.593407] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 471.593410] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 471.593411] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 471.593412] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 471.593413] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 471.593413] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 471.593414] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 471.593415] [drm:check_crtc_state] [CRTC:8] [ 471.593421] [drm:check_crtc_state] [CRTC:12] [ 471.593422] [drm:check_crtc_state] [CRTC:16] [ 471.593423] [drm:check_shared_dpll_state] WRPLL 1 [ 471.593424] [drm:check_shared_dpll_state] WRPLL 2 [ 471.593426] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 471.593427] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 471.593428] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 471.593430] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 471.593431] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 471.593432] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 471.602359] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 471.602363] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 471.602365] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 471.602368] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 471.602370] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 471.602371] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 471.602373] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 471.602375] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 471.602376] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 473.754527] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 473.754534] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 490.302050] kms_plane: executing [ 490.302128] [drm:i915_gem_open] [ 490.302361] [drm:i915_gem_open] [ 490.302417] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.302427] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.302585] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.302588] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.302591] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 490.302593] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 490.302595] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 490.302605] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 490.302608] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 490.302612] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 490.302614] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 490.302616] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 490.302627] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.302630] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.302632] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 490.302634] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 490.302635] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 490.302640] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 490.302642] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 490.302643] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 490.302644] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 490.302648] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 490.302652] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.302654] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.302656] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 490.302658] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 490.302660] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 490.302820] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 490.302822] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 490.302824] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 490.302826] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 490.302828] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 490.302829] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 490.302984] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 490.302985] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 490.302987] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 490.302990] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.302993] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.302995] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 490.302996] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 490.302998] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 490.303163] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 490.303166] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 490.303170] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 490.303174] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 490.303177] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 490.303179] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 490.303335] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 490.303336] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 490.303338] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 490.303366] kms_plane: starting subtest plane-position-hole-pipe-C-plane-2 [ 490.303407] [drm:pipe_crc_set_source] collecting CRCs for pipe C, pf [ 490.303411] [drm:pipe_crc_set_source] stopping CRCs for pipe C [ 490.303421] [drm:add_framebuffer_internal] [FB:36] [ 490.307515] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.307519] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.307522] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 490.307524] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 490.307526] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 490.307533] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 490.307536] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 490.307539] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 490.307541] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 490.307543] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 490.307550] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.307553] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.307555] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 490.307557] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 490.307558] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 490.307563] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 490.307564] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 490.307566] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 490.307567] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 490.307571] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 490.307574] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.307577] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.307579] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 490.307580] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 490.307582] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 490.307740] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 490.307742] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 490.307744] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 490.307746] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 490.307747] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 490.307748] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 490.307904] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 490.307906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 490.307908] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 490.307911] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.307913] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 490.307915] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 490.307917] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 490.307918] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 490.308084] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 490.308089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 490.308095] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 490.308099] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 490.308101] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 490.308102] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 490.308258] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 490.308260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 490.308261] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 490.308266] [drm:drm_mode_setcrtc] [CRTC:16] [ 490.308268] [drm:drm_mode_setcrtc] [CONNECTOR:19:eDP-1] [ 490.308270] [drm:intel_crtc_set_config] [CRTC:16] [FB:36] #connectors=1 (x y) (0 0) [ 490.308273] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 490.308274] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=1, fb_changed=0 [ 490.308276] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:16] [ 490.308278] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 490.308280] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 490.308281] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 490.308284] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 4, prepare: 4, disable: 1 [ 490.308286] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains [ 490.308289] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 490.308290] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 490.308292] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 490.308297] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 490.308298] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 490.308301] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 490.308302] [drm:intel_dump_pipe_config] [CRTC:16][modeset] config for pipe C [ 490.308304] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 490.308305] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 490.308307] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 490.308309] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 490.308311] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 490.308313] [drm:intel_dump_pipe_config] requested mode: [ 490.308315] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 490.308316] [drm:intel_dump_pipe_config] adjusted mode: [ 490.308319] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 490.308321] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 490.308322] [drm:intel_dump_pipe_config] port clock: 270000 [ 490.308324] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 490.308326] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 490.308327] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 490.308329] [drm:intel_dump_pipe_config] ips: 0 [ 490.308330] [drm:intel_dump_pipe_config] double wide: 0 [ 490.318085] [drm:intel_edp_backlight_off] [ 490.519185] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 490.535197] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 490.535203] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 490.535357] [drm:intel_edp_panel_off] Turn eDP power off [ 490.535360] [drm:wait_panel_off] Wait for panel power off time [ 490.535364] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 490.590221] [drm:wait_panel_status] Wait complete [ 490.590228] [drm:intel_update_fbc] no output, disabling [ 490.593654] [drm:intel_edp_panel_on] Turn eDP power on [ 490.593658] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 491.136507] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 491.136509] [drm:wait_panel_status] Wait complete [ 491.136513] [drm:wait_panel_on] Wait for panel power on [ 491.136516] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 491.345611] [drm:wait_panel_status] Wait complete [ 491.345614] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 491.345620] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 491.346677] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 491.347124] [drm:intel_dp_start_link_train] clock recovery OK [ 491.347871] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 491.348105] [drm:intel_edp_backlight_on] [ 491.348106] [drm:intel_panel_enable_backlight] pipe C [ 491.348113] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 491.348118] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 491.348123] [drm:ironlake_update_primary_plane] Writing base 0107D000 00000000 0 0 7680 [ 491.365620] [drm:intel_update_fbc] disabled per chip default [ 491.365624] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 491.365627] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 491.365629] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 491.365630] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 491.365632] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 491.365633] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 491.365634] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 491.365636] [drm:check_crtc_state] [CRTC:8] [ 491.365638] [drm:check_crtc_state] [CRTC:12] [ 491.365640] [drm:check_crtc_state] [CRTC:16] [ 491.365649] [drm:check_shared_dpll_state] WRPLL 1 [ 491.365651] [drm:check_shared_dpll_state] WRPLL 2 [ 493.540746] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 493.540752] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 494.367276] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 494.367278] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 494.367279] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0 [ 494.367281] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 494.367282] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 494.367283] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 494.367284] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 494.367285] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 4 [ 494.367287] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains [ 494.367289] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 494.367289] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 494.367290] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 494.367294] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 494.367295] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 494.367297] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 494.367298] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 494.367299] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 494.367300] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 494.367301] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 494.367302] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 494.367304] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 494.367304] [drm:intel_dump_pipe_config] requested mode: [ 494.367307] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 494.367307] [drm:intel_dump_pipe_config] adjusted mode: [ 494.367309] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 494.367311] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 494.367312] [drm:intel_dump_pipe_config] port clock: 270000 [ 494.367312] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 494.367313] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 494.367314] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 494.367315] [drm:intel_dump_pipe_config] ips: 1 [ 494.367316] [drm:intel_dump_pipe_config] double wide: 0 [ 494.367323] [drm:intel_edp_backlight_off] [ 494.568275] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 494.584288] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 494.584294] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 494.584443] [drm:intel_edp_panel_off] Turn eDP power off [ 494.584446] [drm:wait_panel_off] Wait for panel power off time [ 494.584449] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 494.639312] [drm:wait_panel_status] Wait complete [ 494.639318] [drm:intel_update_fbc] no output, disabling [ 494.639334] [drm:intel_edp_panel_on] Turn eDP power on [ 494.639336] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 495.185599] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 495.218612] [drm:wait_panel_status] Wait complete [ 495.218615] [drm:wait_panel_on] Wait for panel power on [ 495.218617] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 495.427720] [drm:wait_panel_status] Wait complete [ 495.427722] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 495.427728] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 495.428782] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 495.429229] [drm:intel_dp_start_link_train] clock recovery OK [ 495.429976] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 495.430208] [drm:intel_edp_backlight_on] [ 495.430209] [drm:intel_panel_enable_backlight] pipe A [ 495.430215] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 495.430220] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 495.430223] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680 [ 495.465737] [drm:intel_update_fbc] disabled per chip default [ 495.465740] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 495.465743] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 495.465744] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 495.465745] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 495.465746] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 495.465747] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 495.465747] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 495.465748] [drm:check_crtc_state] [CRTC:8] [ 495.465754] [drm:check_crtc_state] [CRTC:12] [ 495.465755] [drm:check_crtc_state] [CRTC:16] [ 495.465756] [drm:check_shared_dpll_state] WRPLL 1 [ 495.465757] [drm:check_shared_dpll_state] WRPLL 2 [ 495.465759] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 495.465761] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 495.465762] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 495.465763] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 495.465764] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 495.465765] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 495.474661] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 495.474665] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 495.474667] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 495.474670] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 495.474672] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 495.474673] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 495.474675] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 495.474677] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 495.474678] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 497.590841] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 497.590848] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007