[ 0.000000] microcode: microcode updated early to revision 0x9e, date = 2016-06-22 [ 0.000000] Linux version 4.9.0-waltercool (root@oryxLaptop) (gcc version 5.4.0 (Gentoo 5.4.0 p1.0, pie-0.6.5) ) #2 SMP Thu Dec 15 02:11:08 CLST 2016 [ 0.000000] Command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.9.0-waltercool root=/dev/mapper/root ro rootflags=subvol=root-gentoo crypt_root=UUID=95a0c03c-49f6-4240-bfe8-d721ca8896b9 --root=/dev/mapper/root init=/usr/lib/systemd/systemd zswap.enabled=1 pcie_port_pm=off drm.debug=0x1e log_buf_len=10M [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005c56dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000005c56e000-0x000000005c56efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000005c56f000-0x000000005c5b8fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005c5b9000-0x000000005c60afff] usable [ 0.000000] BIOS-e820: [mem 0x000000005c60b000-0x000000005ca1bfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005ca1c000-0x000000005ede2fff] usable [ 0.000000] BIOS-e820: [mem 0x000000005ede3000-0x000000005f75dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005f75e000-0x000000005f836fff] usable [ 0.000000] BIOS-e820: [mem 0x000000005f837000-0x000000005fbabfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000005fbac000-0x000000005ffa3fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005ffa4000-0x000000005fffdfff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000005fffe000-0x000000005fffefff] usable [ 0.000000] BIOS-e820: [mem 0x0000000060000000-0x00000000600fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000895ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0x5fee2f98 ACPI=0x5f941000 ACPI 2.0=0x5f941000 SMBIOS=0x5fee1000 SMBIOS 3.0=0x5fee0000 [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x896000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000000] 1 base 0070000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 0068000000 mask 7FF8000000 uncachable [ 0.000000] 3 base 0064000000 mask 7FFC000000 uncachable [ 0.000000] 4 base 0062000000 mask 7FFE000000 uncachable [ 0.000000] 5 base 0061000000 mask 7FFF000000 uncachable [ 0.000000] 6 base 0060800000 mask 7FFF800000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x5ffff max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x000000005fee2f98 to 0x000000005fee2fd0. [ 0.000000] Base memory trampoline at [ffff9ddd80097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x461cdb000, 0x461cdbfff] PGTABLE [ 0.000000] BRK [0x461cdc000, 0x461cdcfff] PGTABLE [ 0.000000] BRK [0x461cdd000, 0x461cddfff] PGTABLE [ 0.000000] BRK [0x461cde000, 0x461cdefff] PGTABLE [ 0.000000] BRK [0x461cdf000, 0x461cdffff] PGTABLE [ 0.000000] BRK [0x461ce0000, 0x461ce0fff] PGTABLE [ 0.000000] BRK [0x461ce1000, 0x461ce1fff] PGTABLE [ 0.000000] BRK [0x461ce2000, 0x461ce2fff] PGTABLE [ 0.000000] BRK [0x461ce3000, 0x461ce3fff] PGTABLE [ 0.000000] BRK [0x461ce4000, 0x461ce4fff] PGTABLE [ 0.000000] BRK [0x461ce5000, 0x461ce5fff] PGTABLE [ 0.000000] BRK [0x461ce6000, 0x461ce6fff] PGTABLE [ 0.000000] log_buf_len: 16777216 bytes [ 0.000000] early log buf free: 518680(98%) [ 0.000000] RAMDISK: [mem 0x35e2b000-0x36f0cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000005F941000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000005F9410A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000005F95AAF0 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000005F941200 0198E9 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x000000005FBABF80 000040 [ 0.000000] ACPI: APIC 0x000000005F95AC00 0000BC (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000005F95ACC0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000005F95AD08 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000005F95ADA8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000005F95ADE8 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x000000005F95AE20 000315 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000005F95B138 001100 (v01 INTEL PtidDevc 00001000 INTL 20120913) [ 0.000000] ACPI: DBGP 0x000000005F95C238 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x000000005F95C270 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000005F95C2C8 005655 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x000000005F961920 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x000000005F961968 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000005F9627C0 000778 (v02 Intel PerfTune 00001000 INTL 20120913) [ 0.000000] ACPI: BGRT 0x000000005F962F38 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x000000005F962F70 00009F (v02 SgRef SgPeg 00001000 INTL 20120913) [ 0.000000] ACPI: DMAR 0x000000005F963010 0000A8 (v01 INTEL SKL 00000001 INTL 00000001) [ 0.000000] ACPI: TPM2 0x000000005F9630B8 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) [ 0.000000] ACPI: SSDT 0x000000005F9630F0 001553 (v01 OptRef OptTabl 00001000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x000000005F964648 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000895ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x894fdd000-0x894ffefff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000895ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000005c56dfff] [ 0.000000] node 0: [mem 0x000000005c5b9000-0x000000005c60afff] [ 0.000000] node 0: [mem 0x000000005ca1c000-0x000000005ede2fff] [ 0.000000] node 0: [mem 0x000000005f75e000-0x000000005f836fff] [ 0.000000] node 0: [mem 0x000000005fffe000-0x000000005fffefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000895ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000895ffffff] [ 0.000000] On node 0 totalpages: 8342013 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 5994 pages used for memmap [ 0.000000] DMA32 zone: 383585 pages, LIFO batch:31 [ 0.000000] Normal zone: 124288 pages used for memmap [ 0.000000] Normal zone: 7954432 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x0000000061000000-0x0000000068ffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x5c56e000-0x5c56efff] [ 0.000000] PM: Registered nosave memory: [mem 0x5c56f000-0x5c5b8fff] [ 0.000000] PM: Registered nosave memory: [mem 0x5c60b000-0x5ca1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5ede3000-0x5f75dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5f837000-0x5fbabfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5fbac000-0x5ffa3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x5ffa4000-0x5fffdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5ffff000-0x5fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x60000000-0x600fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x60100000-0x60ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x61000000-0x68ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x69000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x69000000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 34 pages/cpu @ffff9de614c00000 s100952 r8192 d30120 u262144 [ 0.000000] pcpu-alloc: s100952 r8192 d30120 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8211644 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.9.0-waltercool root=/dev/mapper/root ro rootflags=subvol=root-gentoo crypt_root=UUID=95a0c03c-49f6-4240-bfe8-d721ca8896b9 --root=/dev/mapper/root init=/usr/lib/systemd/systemd zswap.enabled=1 pcie_port_pm=off drm.debug=0x1e log_buf_len=10M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 32688156K/33368052K available (7644K kernel code, 1261K rwdata, 3076K rodata, 1668K init, 1992K bss, 679896K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:524544 nr_irqs:2048 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2700.000 MHz processor [ 0.000015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=2712000) [ 0.000020] pid_max: default: 32768 minimum: 301 [ 0.000024] ACPI: Core revision 20160831 [ 0.019109] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.019795] Security Framework initialized [ 0.020917] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.025374] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.027326] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.027345] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.027571] CPU: Physical Processor ID: 0 [ 0.027573] CPU: Processor Core ID: 0 [ 0.027577] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.027579] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.027584] mce: CPU supports 10 MCE banks [ 0.027591] CPU0: Thermal monitoring enabled (TM1) [ 0.027606] process: using mwait in idle threads [ 0.027610] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.027612] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.028266] Freeing SMP alternatives memory: 36K (ffffffffa4ade000 - ffffffffa4ae7000) [ 0.030028] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.030030] smpboot: Max logical packages: 2 [ 0.030035] DMAR: Host address width 39 [ 0.030037] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.030043] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0501e [ 0.030046] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.030050] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.030053] DMAR: RMRR base: 0x0000005f4d8000 end: 0x0000005f4f7fff [ 0.030056] DMAR: RMRR base: 0x00000060800000 end: 0x00000068ffffff [ 0.030058] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.030061] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.030246] DMAR: DRHD: handling fault status reg 3 [ 0.030249] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0 [fault reason 37] Blocked a compatibility format interrupt request [ 0.031512] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.035547] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.045555] TSC deadline timer enabled [ 0.045560] smpboot: CPU0: Intel(R) Core(TM) i7-6820HK CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.045565] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.045589] ... version: 4 [ 0.045591] ... bit width: 48 [ 0.045592] ... generic registers: 4 [ 0.045594] ... value mask: 0000ffffffffffff [ 0.045596] ... max period: 00007fffffffffff [ 0.045598] ... fixed-purpose events: 3 [ 0.045600] ... event mask: 000000070000000f [ 0.046051] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.046104] x86: Booting SMP configuration: [ 0.046107] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.483007] x86: Booted up 1 node, 8 CPUs [ 0.483013] smpboot: Total of 8 processors activated (43413.92 BogoMIPS) [ 0.489798] devtmpfs: initialized [ 0.489944] PM: Registering ACPI NVS region [mem 0x5c56e000-0x5c56efff] (4096 bytes) [ 0.489948] PM: Registering ACPI NVS region [mem 0x5f837000-0x5fbabfff] (3624960 bytes) [ 0.490010] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.490033] xor: automatically using best checksumming function avx [ 0.490041] pinctrl core: initialized pinctrl subsystem [ 0.490128] NET: Registered protocol family 16 [ 0.496282] cpuidle: using governor menu [ 0.496343] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.496347] ACPI: bus type PCI registered [ 0.496350] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.496389] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.496394] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.496406] PCI: Using configuration type 1 for base access [ 0.502368] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.502371] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.519315] raid6: sse2x1 gen() 11371 MB/s [ 0.536326] raid6: sse2x1 xor() 8628 MB/s [ 0.553337] raid6: sse2x2 gen() 14074 MB/s [ 0.570347] raid6: sse2x2 xor() 9912 MB/s [ 0.587360] raid6: sse2x4 gen() 16156 MB/s [ 0.604368] raid6: sse2x4 xor() 11359 MB/s [ 0.621379] raid6: avx2x1 gen() 19570 MB/s [ 0.638388] raid6: avx2x2 gen() 26105 MB/s [ 0.655398] raid6: avx2x4 gen() 27433 MB/s [ 0.655401] raid6: using algorithm avx2x4 gen() 27433 MB/s [ 0.655403] raid6: using avx2x2 recovery algorithm [ 0.655424] ACPI: Added _OSI(Module Device) [ 0.655426] ACPI: Added _OSI(Processor Device) [ 0.655428] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.655430] ACPI: Added _OSI(Processor Aggregator Device) [ 0.656148] ACPI: Executed 20 blocks of module-level executable AML code [ 0.661890] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.664627] ACPI: Dynamic OEM Table Load: [ 0.664633] ACPI: SSDT 0xFFFF9DE5F0438000 0005FD (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.664814] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.665684] ACPI: Dynamic OEM Table Load: [ 0.665690] ACPI: SSDT 0xFFFF9DE5F0AD5000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.666321] ACPI: Dynamic OEM Table Load: [ 0.666326] ACPI: SSDT 0xFFFF9DE5F0ADA800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.666625] ACPI: Dynamic OEM Table Load: [ 0.666629] ACPI: SSDT 0xFFFF9DE5F0B2CA00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.669986] ACPI : EC: EC started [ 0.687967] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC [ 0.687970] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.687973] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions [ 0.687976] ACPI: Interpreter enabled [ 0.688003] ACPI: (supports S0 S3 S4 S5) [ 0.688005] ACPI: Using IOAPIC for interrupt routing [ 0.688030] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.689399] ACPI: Power Resource [PG00] (on) [ 0.689674] ACPI: Power Resource [PG01] (on) [ 0.689890] ACPI: Power Resource [PG02] (on) [ 0.698854] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.698860] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.698883] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.699222] PCI host bridge to bus 0000:00 [ 0.699225] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.699228] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.699230] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.699233] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.699236] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.699240] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.699243] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.699246] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.699249] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.699252] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.699256] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.699259] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.699262] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.699265] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.699268] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.699271] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.699274] pci_bus 0000:00: root bus resource [mem 0x69000000-0xdfffffff window] [ 0.699278] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.699281] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.699287] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000 [ 0.699363] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 0.699389] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.699467] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.699513] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000 [ 0.699518] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit] [ 0.699522] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.699525] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.699661] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.699676] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit] [ 0.699731] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.699797] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.699824] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 [ 0.699838] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit] [ 0.699960] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.699977] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit] [ 0.700040] pci 0000:00:16.0: PME# supported from D3hot [ 0.700139] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601 [ 0.700150] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff] [ 0.700156] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff] [ 0.700161] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.700167] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.700173] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.700178] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff] [ 0.700210] pci 0000:00:17.0: PME# supported from D3hot [ 0.700300] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400 [ 0.700347] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.700422] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.700458] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400 [ 0.700506] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.700581] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.700616] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100 [ 0.700784] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 0.700792] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff] [ 0.700903] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 [ 0.700920] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit] [ 0.700941] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit] [ 0.700981] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.701081] pci 0000:00:1f.3: System wakeup disabled by ACPI [ 0.701111] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 0.701158] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit] [ 0.701227] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.701399] pci 0000:01:00.0: [10de:1617] type 00 class 0x030000 [ 0.701405] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff] [ 0.701412] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.701418] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.701422] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.701426] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref] [ 0.701488] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.703678] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.703681] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.703683] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff] [ 0.703685] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.703759] pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000 [ 0.703772] pci 0000:02:00.0: reg 0x10: [mem 0xdf215000-0xdf215fff] [ 0.703810] pci 0000:02:00.0: reg 0x30: [mem 0xdf200000-0xdf20ffff pref] [ 0.703881] pci 0000:02:00.0: supports D1 D2 [ 0.703882] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.703922] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.703955] pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000 [ 0.703970] pci 0000:02:00.1: reg 0x10: [io 0xd000-0xd0ff] [ 0.703993] pci 0000:02:00.1: reg 0x18: [mem 0xdf214000-0xdf214fff 64bit] [ 0.704007] pci 0000:02:00.1: reg 0x20: [mem 0xdf210000-0xdf213fff 64bit] [ 0.704082] pci 0000:02:00.1: supports D1 D2 [ 0.704083] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.706698] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.706701] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.706703] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff] [ 0.706781] pci 0000:03:00.0: [8086:24f3] type 00 class 0x028000 [ 0.706810] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit] [ 0.706964] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.707017] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.709740] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.709745] pci 0000:00:1c.5: bridge window [mem 0xdf100000-0xdf1fffff] [ 0.710452] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.710490] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.710526] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.710563] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.710598] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.710634] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.710669] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.710706] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.710927] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.711004] ACPI : EC: event unblocked [ 0.711016] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.711020] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events [ 0.711136] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.711138] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.711143] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.711146] vgaarb: loaded [ 0.711148] vgaarb: bridge control possible 0000:01:00.0 [ 0.711150] vgaarb: no bridge control possible 0000:00:02.0 [ 0.711178] SCSI subsystem initialized [ 0.711183] libata version 3.00 loaded. [ 0.711187] ACPI: bus type USB registered [ 0.711198] usbcore: registered new interface driver usbfs [ 0.711205] usbcore: registered new interface driver hub [ 0.711217] usbcore: registered new device driver usb [ 0.711257] Registered efivars operations [ 0.730143] PCI: Using ACPI for IRQ routing [ 0.758162] PCI: pci_cache_line_size set to 64 bytes [ 0.758228] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.758229] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.758229] e820: reserve RAM buffer [mem 0x5c56e000-0x5fffffff] [ 0.758230] e820: reserve RAM buffer [mem 0x5c60b000-0x5fffffff] [ 0.758231] e820: reserve RAM buffer [mem 0x5ede3000-0x5fffffff] [ 0.758232] e820: reserve RAM buffer [mem 0x5f837000-0x5fffffff] [ 0.758233] e820: reserve RAM buffer [mem 0x5ffff000-0x5fffffff] [ 0.758234] e820: reserve RAM buffer [mem 0x896000000-0x897ffffff] [ 0.758286] NetLabel: Initializing [ 0.758288] NetLabel: domain hash size = 128 [ 0.758290] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.758300] NetLabel: unlabeled traffic allowed by default [ 0.758373] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.758378] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.760417] clocksource: Switched to clocksource hpet [ 0.762852] pnp: PnP ACPI init [ 0.762993] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.762996] system 00:00: [io 0xffff] has been reserved [ 0.762998] system 00:00: [io 0xffff] has been reserved [ 0.763001] system 00:00: [io 0xffff] has been reserved [ 0.763003] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.763005] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.763008] system 00:00: [io 0x3322-0x3323] has been reserved [ 0.763011] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.763066] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.763069] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.763081] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.763103] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.763106] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.763119] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.763189] pnp 00:05: Plug and Play ACPI device, IDs SYN1219 PNP0f13 (active) [ 0.763313] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.763316] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.763319] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.763321] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.763323] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.763326] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.763328] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.763331] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.763333] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.763336] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.763339] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.763363] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.763365] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.763368] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.763370] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.763373] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.763375] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.763378] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.763380] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.763577] system 00:08: [io 0xff00-0xfffe] has been reserved [ 0.763580] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.764228] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.764231] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.764234] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.764236] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.764623] pnp: PnP ACPI: found 10 devices [ 0.771345] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.771363] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.771366] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.771370] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff] [ 0.771373] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.771378] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.771381] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.771385] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff] [ 0.771391] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.771394] pci 0000:00:1c.5: bridge window [mem 0xdf100000-0xdf1fffff] [ 0.771401] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.771402] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.771402] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.771403] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.771404] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.771404] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.771405] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.771406] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.771406] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.771407] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.771407] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.771408] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.771409] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.771409] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.771410] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.771410] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.771411] pci_bus 0000:00: resource 20 [mem 0x69000000-0xdfffffff window] [ 0.771412] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window] [ 0.771412] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.771413] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff] [ 0.771414] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.771414] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.771415] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff] [ 0.771433] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff] [ 0.771509] NET: Registered protocol family 2 [ 0.771673] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.771914] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.772002] TCP: Hash tables configured (established 262144 bind 65536) [ 0.772028] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.772093] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.772160] NET: Registered protocol family 1 [ 0.772169] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.772895] PCI: CLS 0 bytes, default 64 [ 0.772918] Unpacking initramfs... [ 0.997863] Freeing initrd memory: 17288K (ffff9dddb5e2b000 - ffff9dddb6f0d000) [ 0.997897] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.997900] software IO TLB [mem 0x57825000-0x5b825000] (64MB) mapped at [ffff9dddd7825000-ffff9ddddb824fff] [ 0.998054] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 0.998057] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 0.998059] RAPL PMU: hw unit of domain package 2^-14 Joules [ 0.998061] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 0.998063] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 0.998065] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 0.998729] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.998747] audit: initializing netlink subsys (disabled) [ 0.998756] audit: type=2000 audit(1482208105.985:1): initialized [ 0.998917] Initialise system trusted keyrings [ 0.999023] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.999734] zbud: loaded [ 1.001346] async_tx: api initialized (async) [ 1.001348] Key type asymmetric registered [ 1.001351] Asymmetric key parser 'x509' registered [ 1.001367] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.001414] io scheduler noop registered [ 1.001434] io scheduler deadline registered [ 1.001439] io scheduler cfq registered (default) [ 1.001774] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.001779] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.001788] efifb: probing for efifb [ 1.001796] efifb: framebuffer at 0xa0000000, using 8128k, total 8128k [ 1.001798] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.001800] efifb: scrolling: redraw [ 1.001802] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.004784] Console: switching to colour frame buffer device 240x67 [ 1.007647] fb0: EFI VGA frame buffer device [ 1.007661] intel_idle: MWAIT substates: 0x11142120 [ 1.007662] intel_idle: v0.4.1 model 0x5E [ 1.007944] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.007947] ipmi message handler version 39.2 [ 1.007964] IPMI System Interface driver. [ 1.007986] ipmi_si: Unable to find any System Interface(s) [ 1.009054] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.009074] ACPI: Power Button [PWRB] [ 1.009104] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.009124] ACPI: Sleep Button [SLPB] [ 1.009171] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 1.009217] ACPI: Lid Switch [LID0] [ 1.009246] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.009263] ACPI: Power Button [PWRF] [ 1.009511] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.009526] ACPI: Thermal Zone [TZ0] (40 C) [ 1.009585] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.009972] Linux agpgart interface v0.103 [ 1.010012] [drm] Initialized [ 1.013241] loop: module loaded [ 1.013475] zram: Added device: zram0 [ 1.013513] ahci 0000:00:17.0: version 3.0 [ 1.013609] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 1.023747] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.023765] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part ems deso sadm sds apst [ 1.033029] scsi host0: ahci [ 1.033339] scsi host1: ahci [ 1.033739] scsi host2: ahci [ 1.034010] scsi host3: ahci [ 1.034039] ata1: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b100 irq 123 [ 1.034057] ata2: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b180 irq 123 [ 1.034074] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 123 [ 1.034103] ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 123 [ 1.034174] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12 [ 1.339095] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.340669] ata1.00: supports DRM functions and may not be fully accessible [ 1.341308] ata1.00: disabling queued TRIM support [ 1.341309] ata1.00: ATA-9: Samsung SSD 850 EVO M.2 250GB, EMT21B6Q, max UDMA/133 [ 1.341328] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.341775] ata1.00: supports DRM functions and may not be fully accessible [ 1.342370] ata1.00: disabling queued TRIM support [ 1.342556] ata1.00: configured for UDMA/133 [ 1.343005] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.587774] i8042: Detected active multiplexing controller, rev 1.1 [ 1.590141] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.590154] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.590186] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.590872] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.591531] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.592193] mousedev: PS/2 mouse device common for all mice [ 1.593192] rtc_cmos 00:02: RTC can wake from S4 [ 1.594321] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.595087] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.595783] i2c /dev entries driver [ 1.596514] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.597170] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.598040] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.599762] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.600277] md: raid0 personality registered for level 0 [ 1.600278] md: raid1 personality registered for level 1 [ 1.600278] md: raid10 personality registered for level 10 [ 1.600465] md: raid6 personality registered for level 6 [ 1.600466] md: raid5 personality registered for level 5 [ 1.600466] md: raid4 personality registered for level 4 [ 1.600766] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.600930] hidraw: raw HID events driver (C) Jiri Kosina [ 1.600953] usbcore: registered new interface driver usbhid [ 1.600953] usbhid: USB HID core driver [ 1.601048] Initializing XFRM netlink socket [ 1.601142] NET: Registered protocol family 10 [ 1.601368] NET: Registered protocol family 17 [ 1.601560] microcode: sig=0x506e3, pf=0x20, revision=0x9e [ 1.602402] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.602562] registered taskstats version 1 [ 1.602562] Loading compiled-in X.509 certificates [ 1.605782] Loaded X.509 cert 'Build time autogenerated kernel key: d2f4117147ed1ae956b230eb3130bec520dc374b' [ 1.605793] zswap: loaded using pool lzo/zbud [ 1.610484] Btrfs loaded, crc32c=crc32c-generic [ 1.615218] Key type encrypted registered [ 1.616174] rtc_cmos 00:02: setting system clock to 2016-12-20 04:28:27 UTC (1482208107) [ 1.616183] sd 0:0:0:0: [sda] Write Protect is off [ 1.616184] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.616188] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.618096] PM: Hibernation image not present or could not be loaded. [ 1.618990] sda: sda1 sda2 [ 1.619902] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.907140] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.909138] ata2.00: ATA-9: SanDisk SD8SNAT256G1122, Z2201000, max UDMA/133 [ 1.909971] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.918298] ata2.00: configured for UDMA/133 [ 1.919716] scsi 1:0:0:0: Direct-Access ATA SanDisk SD8SNAT2 1000 PQ: 0 ANSI: 5 [ 1.950655] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.951469] sd 1:0:0:0: [sdb] Write Protect is off [ 1.952085] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.952090] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.953133] sdb: sdb1 [ 1.954020] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.028468] tsc: Refined TSC clocksource calibration: 2711.999 MHz [ 2.029197] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x271785701be, max_idle_ns: 440795203568 ns [ 2.259236] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.270947] ata3.00: ATA-9: PNY CS1311 240GB SSD, CS131122, max UDMA/133 [ 2.271793] ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.272777] ata3.00: configured for UDMA/133 [ 2.274101] scsi 2:0:0:0: Direct-Access ATA PNY CS1311 240GB 1122 PQ: 0 ANSI: 5 [ 2.304660] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.305472] sd 2:0:0:0: [sdc] Write Protect is off [ 2.306130] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.306135] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.307305] sdc: sdc1 [ 2.308269] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.611264] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.612362] ata4.00: ATA-8: ST480HM000-1G5162, C675, max UDMA/133 [ 2.613368] ata4.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.614783] ata4.00: configured for UDMA/133 [ 2.616050] scsi 3:0:0:0: Direct-Access ATA ST480HM000-1G516 C675 PQ: 0 ANSI: 5 [ 2.650691] sd 3:0:0:0: [sdd] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.651427] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 2.652091] sd 3:0:0:0: [sdd] Write Protect is off [ 2.652736] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.652741] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.656280] sdd: sdd2 [ 2.657264] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.659217] Freeing unused kernel memory: 1668K (ffffffffa493d000 - ffffffffa4ade000) [ 2.659961] Write protecting the kernel read-only data: 12288k [ 2.660956] Freeing unused kernel memory: 528K (ffff9de1e137c000 - ffff9de1e1400000) [ 2.663038] Freeing unused kernel memory: 1020K (ffff9de1e1701000 - ffff9de1e1800000) [ 2.899428] psmouse serio2: synaptics: queried max coordinates: x [..5654], y [..4716] [ 3.015807] psmouse serio2: synaptics: queried min coordinates: x [1326..], y [1228..] [ 3.100787] clocksource: Switched to clocksource tsc [ 3.159263] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x0, board id: 3163, fw id: 1924066 [ 3.197278] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10 [ 3.296883] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.304028] ehci-pci: EHCI PCI platform driver [ 3.345775] usbcore: registered new interface driver usb-storage [ 3.359372] uhci_hcd: USB Universal Host Controller Interface driver [ 3.372803] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.424114] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.424119] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 3.425194] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 3.425197] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.425260] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.425261] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.425262] usb usb1: Product: xHCI Host Controller [ 3.425263] usb usb1: Manufacturer: Linux 4.9.0-waltercool xhci-hcd [ 3.425263] usb usb1: SerialNumber: 0000:00:14.0 [ 3.425374] hub 1-0:1.0: USB hub found [ 3.425393] hub 1-0:1.0: 16 ports detected [ 3.434068] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.434070] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.434087] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.434087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.434088] usb usb2: Product: xHCI Host Controller [ 3.434088] usb usb2: Manufacturer: Linux 4.9.0-waltercool xhci-hcd [ 3.434089] usb usb2: SerialNumber: 0000:00:14.0 [ 3.434174] hub 2-0:1.0: USB hub found [ 3.434202] hub 2-0:1.0: 8 ports detected [ 3.436172] usb: port power management may be unreliable [ 3.526332] device-mapper: raid: Loading target version 1.9.1 [ 3.712729] JFS: nTxBlock = 8192, nTxLock = 65536 [ 3.746637] FS-Cache: Loaded [ 3.800446] usb 1-5: new full-speed USB device number 2 using xhci_hcd [ 3.904277] RPC: Registered named UNIX socket transport module. [ 3.904277] RPC: Registered udp transport module. [ 3.904278] RPC: Registered tcp transport module. [ 3.904278] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.042707] usb 1-5: New USB device found, idVendor=0738, idProduct=1705 [ 4.042708] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.042709] usb 1-5: Product: Mad Catz R.A.T.5 Mouse [ 4.042710] usb 1-5: Manufacturer: Mad Catz [ 4.045257] input: Mad Catz Mad Catz R.A.T.5 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:0738:1705.0001/input/input13 [ 4.045350] hid-generic 0003:0738:1705.0001: input,hidraw0: USB HID v1.11 Mouse [Mad Catz Mad Catz R.A.T.5 Mouse] on usb-0000:00:14.0-5/input0 [ 4.150645] FS-Cache: Netfs 'nfs' registered for caching [ 4.201423] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 4.371024] usb 1-7: New USB device found, idVendor=1c7a, idProduct=0603 [ 4.371025] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.371025] usb 1-7: Product: EgisTec_ES603 [ 4.371026] usb 1-7: Manufacturer: EgisTec [ 4.527421] usb 1-8: new full-speed USB device number 4 using xhci_hcd [ 4.601600] SGI XFS with ACLs, security attributes, no debug enabled [ 4.646341] fuse init (API version 7.26) [ 4.684740] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.684744] r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control [ 4.689462] r8169 0000:02:00.1 eth0: RTL8411 at 0xffffaa6cc3171000, 80:fa:5b:27:f1:42, XID 1c800800 IRQ 125 [ 4.689464] r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 4.696283] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b [ 4.696284] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.773248] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 4.845856] AVX2 version of gcm_enc/dec engaged. [ 4.845856] AES CTR mode by8 optimization enabled [ 7.051128] random: fast init done [ 7.943907] random: crng init done [ 10.558332] BTRFS: device label OS devid 1 transid 379709 /dev/mapper/root [ 10.558846] BTRFS info (device dm-0): disk space caching is enabled [ 10.558846] BTRFS info (device dm-0): has skinny extents [ 10.617780] BTRFS info (device dm-0): detected SSD devices, enabling SSD mode [ 10.724593] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 10.724706] systemd[1]: Detected architecture x86-64. [ 10.727391] systemd[1]: Set hostname to . [ 10.739607] systemd-fstab-generator[2588]: Checking was requested for "tmpfs", but it is not a device. [ 10.739621] systemd-fstab-generator[2588]: Checking was requested for "tmpfs", but it is not a device. [ 10.767401] systemd[1]: Created slice User and Session Slice. [ 10.768282] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.769081] systemd[1]: Created slice System Slice. [ 10.769863] systemd[1]: Created slice system-getty.slice. [ 10.770630] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 10.771355] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.772294] systemd[1]: Mounting POSIX Message Queue File System... [ 10.830060] BTRFS info (device dm-0): disk space caching is enabled [ 10.838124] systemd-journald[2603]: Received request to flush runtime journal from PID 1 [ 10.950858] ahci 0000:00:17.0: port does not support device sleep [ 10.961403] ahci 0000:00:17.0: port does not support device sleep [ 11.002006] ACPI: AC Adapter [AC] (on-line) [ 11.009967] wmi: Mapper loaded [ 11.034761] r8169 0000:02:00.1 enp2s0f1: renamed from eth0 [ 11.050630] ACPI: Battery Slot [BAT0] (battery present) [ 11.072049] input: PC Speaker as /devices/platform/pcspkr/input/input14 [ 11.075208] nvidia: loading out-of-tree module taints kernel. [ 11.075212] nvidia: module license 'NVIDIA' taints kernel. [ 11.075213] Disabling lock debugging due to kernel taint [ 11.081613] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 11.081672] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 11.081730] nvidia-nvlink: Nvlink Core is being initialized, major device number 248 [ 11.081741] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.26 Thu Dec 8 18:36:43 PST 2016 [ 11.081742] (using threaded interrupts) [ 11.082074] EFI Variables Facility v0.08 2004-May-17 [ 11.144565] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002) [ 11.144673] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 126 [ 11.170495] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.26 Thu Dec 8 18:04:14 PST 2016 [ 11.177454] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 11.235844] pstore: using zlib compression [ 11.258163] Bluetooth: Core ver 2.22 [ 11.258172] NET: Registered protocol family 31 [ 11.258173] Bluetooth: HCI device and connection manager initialized [ 11.258175] Bluetooth: HCI socket layer initialized [ 11.258177] Bluetooth: L2CAP socket layer initialized [ 11.258180] Bluetooth: SCO socket layer initialized [ 11.298387] pstore: Registered efi as persistent store backend [ 11.313327] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 11.313376] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 11.313412] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 11.313453] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 11.313485] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 11.313535] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 11.313568] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 11.319388] Bluetooth: HCI UART driver ver 2.3 [ 11.319389] Bluetooth: HCI UART protocol H4 registered [ 11.319686] Bluetooth: HCI UART protocol Intel registered [ 11.633535] Error: Driver 'pcspkr' is already registered, aborting... [ 11.810153] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 11.933540] usbcore: registered new interface driver btusb [ 11.941216] Bluetooth: hci0: Firmware revision 0.0 build 95 week 37 2016 [ 12.012781] Intel(R) Wireless WiFi driver for Linux [ 12.012782] Copyright(c) 2003- 2015 Intel Corporation [ 12.012845] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002) [ 12.015355] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2 [ 12.015364] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2 [ 12.015372] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2 [ 12.015380] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2 [ 12.023566] iwlwifi 0000:03:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm [ 12.054512] intel_rapl: Found RAPL domain package [ 12.054514] intel_rapl: Found RAPL domain core [ 12.054515] intel_rapl: Found RAPL domain uncore [ 12.054516] intel_rapl: Found RAPL domain dram [ 12.144477] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 12.504193] [drm:i915_driver_load [i915]] Found SunrisePoint PCH [ 12.504211] [drm:intel_power_domains_init [i915]] Allowed DC state mask 03 [ 12.504258] [drm:intel_device_info_dump [i915]] i915 device info: gen=9, pciid=0x191b rev=0x06 flags=is_skylake,has_fbc,has_psr,has_runtime_pm,has_csr,has_resource_streamer,has_rc6,has_dp_mst,has_gmbus_irq,has_hw_contexts,has_logical_ring_contexts,has_guc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 12.504507] [drm:intel_device_info_runtime_init [i915]] slice mask: 0001 [ 12.504522] [drm:intel_device_info_runtime_init [i915]] slice total: 1 [ 12.504537] [drm:intel_device_info_runtime_init [i915]] subslice total: 3 [ 12.504550] [drm:intel_device_info_runtime_init [i915]] subslice mask 0007 [ 12.504564] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 3 [ 12.504577] [drm:intel_device_info_runtime_init [i915]] EU total: 24 [ 12.504590] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 8 [ 12.504603] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n [ 12.504616] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n [ 12.504630] [drm:intel_device_info_runtime_init [i915]] has EU power gating: y [ 12.504645] [drm:i915_driver_load [i915]] ppgtt mode: 3 [ 12.504659] [drm:i915_driver_load [i915]] use GPU sempahores? no [ 12.504669] [drm] Memory usable by graphics device = 4096M [ 12.504686] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 512M [ 12.504703] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 128M [ 12.504704] checking generic (a0000000 7f0000) vs hw (a0000000 20000000) [ 12.504705] fb: switching to inteldrmfb from EFI VGA [ 12.504718] Console: switching to colour dummy device 80x25 [ 12.505214] [drm] Replacing VGA console driver [ 12.505270] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 130048K [ 12.505293] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x5fb95018 [ 12.505315] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 12.505330] [drm:intel_opregion_setup [i915]] SWSCI supported [ 12.511456] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 12.511474] [drm:intel_opregion_setup [i915]] ASLE supported [ 12.511490] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 12.511504] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 12.511539] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 12.511539] [drm] Driver supports precise vblank timestamp query. [ 12.511558] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 12.511574] [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 197 [ 12.511590] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 12.511604] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 [ 12.513477] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) [ 12.513496] [drm:intel_bios_init [i915]] Panel type: 15 (VBT) [ 12.513513] [drm:intel_bios_init [i915]] DRRS supported mode is seamless [ 12.513529] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 12.513532] [drm:drm_mode_debug_printmodeline] Modeline 0:"2048x1536" 0 164250 2048 2064 2080 2144 1536 1537 1538 1555 0x8 0xa [ 12.513546] [drm:intel_bios_init [i915]] VBT initial LVDS value 33c [ 12.513560] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 450 Hz, active high, min brightness 15, level 80 [ 12.513572] [drm:intel_bios_init [i915]] Unsupported child device size for SDVO mapping. [ 12.513585] [drm:intel_bios_init [i915]] DRRS State Enabled:0 [ 12.513597] [drm:intel_bios_init [i915]] VBT has unknown eDP link rate value 2 [ 12.513609] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 12.513621] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 [ 12.513656] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 12.513699] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 12.513721] [drm:intel_update_rawclk [i915]] rawclk rate: 24000 kHz [ 12.513737] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 12.513754] [drm:intel_power_well_enable [i915]] enabling power well 1 [ 12.513771] [drm:intel_power_well_enable [i915]] enabling MISC IO power well [ 12.513788] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 12.513802] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz [ 12.513815] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz [ 12.513841] [drm:intel_power_well_enable [i915]] enabling always-on [ 12.513856] [drm:intel_power_well_enable [i915]] enabling DC off [ 12.513870] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 12.513885] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 12.513899] [drm:intel_power_well_enable [i915]] enabling DDI A/E power well [ 12.513913] [drm:intel_power_well_enable [i915]] enabling DDI B power well [ 12.513927] [drm:skl_set_power_well [i915]] Enabling DDI B power well [ 12.513940] [drm:intel_power_well_enable [i915]] enabling DDI C power well [ 12.513954] [drm:skl_set_power_well [i915]] Enabling DDI C power well [ 12.513966] [drm:intel_power_well_enable [i915]] enabling DDI D power well [ 12.513979] [drm:skl_set_power_well [i915]] Enabling DDI D power well [ 12.513992] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 12.514013] [drm:intel_csr_ucode_init [i915]] Loading i915/skl_dmc_ver1_26.bin [ 12.514427] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 [ 12.514453] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) [ 12.514474] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) [ 12.514494] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) [ 12.514510] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) [ 12.514530] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) [ 12.514546] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) [ 12.514561] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) [ 12.514580] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) [ 12.514602] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 12.514676] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 12.515018] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A [ 12.515048] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT) [ 12.515108] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 4000 [ 12.515125] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 12000 t10 500 t11_t12 3000 [ 12.515144] [drm:intel_dp_init_panel_power_sequencer.part.14 [i915]] panel power up delay 200, power down delay 50, power cycle delay 400 [ 12.515160] [drm:intel_dp_init_panel_power_sequencer.part.14 [i915]] backlight on delay 1, off delay 1200 [ 12.515220] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af04 [ 12.515534] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26) [ 12.515563] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 12.515625] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 12.516060] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 0a c2 41 00 00 01 c0 02 00 00 00 1f 0b 00 [ 12.516382] [drm:intel_dp_init_connector [i915]] Detected EDP PSR Panel. [ 12.516715] [drm:intel_dp_init_connector [i915]] EDP DPCD : 02 b7 f6 [ 12.518780] [drm:drm_dp_i2c_do_msg] native defer [ 12.519781] [drm:drm_dp_i2c_do_msg] native defer [ 12.521058] [drm:drm_dp_i2c_do_msg] native defer [ 12.522077] [drm:drm_dp_i2c_do_msg] native defer [ 12.523384] [drm:drm_dp_i2c_do_msg] native defer [ 12.524428] [drm:drm_dp_i2c_do_msg] native defer [ 12.525735] [drm:drm_dp_i2c_do_msg] native defer [ 12.526778] [drm:drm_dp_i2c_do_msg] native defer [ 12.528089] [drm:drm_dp_i2c_do_msg] native defer [ 12.529108] [drm:drm_dp_i2c_do_msg] native defer [ 12.530403] [drm:drm_dp_i2c_do_msg] native defer [ 12.531446] [drm:drm_dp_i2c_do_msg] native defer [ 12.532753] [drm:drm_dp_i2c_do_msg] native defer [ 12.533796] [drm:drm_dp_i2c_do_msg] native defer [ 12.535108] [drm:drm_dp_i2c_do_msg] native defer [ 12.536111] [drm:drm_dp_i2c_do_msg] native defer [ 12.537133] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 12.537159] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS [ 12.537213] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 130/416 [ 12.537256] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:26:pipe A] hw state readout: enabled [ 12.537280] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:30:pipe B] hw state readout: disabled [ 12.537301] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:34:pipe C] hw state readout: disabled [ 12.537321] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1 [ 12.537340] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 12.537357] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 12.537374] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0 [ 12.537394] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:36:DDI A] hw state readout: enabled, pipe A [ 12.537412] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:37:eDP-1] hw state readout: enabled [ 12.537694] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff9de5edd5a800 [ 12.537724] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][setup_hw_state] config ffff9de5edd5a800 for pipe A [ 12.537745] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP [ 12.537765] [drm:intel_dump_pipe_config [i915]] pipe bpp: 18, dithering: 0 [ 12.537784] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 12.537802] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 2, gmch_m: 4860034, gmch_n: 8388608, link_m: 270001, link_n: 524288, tu: 64 [ 12.537819] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 12.537836] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 12.537852] [drm:intel_dump_pipe_config [i915]] requested mode: [ 12.537855] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139046 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9 [ 12.537871] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 12.537873] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139046 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9 [ 12.537890] [drm:intel_dump_pipe_config [i915]] crtc timings: 139046 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x40 flags: 0x9 [ 12.537906] [drm:intel_dump_pipe_config [i915]] port clock: 270000 [ 12.537922] [drm:intel_dump_pipe_config [i915]] pipe src size: 1920x1080 [ 12.537939] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 12.537955] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 12.537970] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 12.537986] [drm:intel_dump_pipe_config [i915]] ips: 0 [ 12.538001] [drm:intel_dump_pipe_config [i915]] double wide: 0 [ 12.538017] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x13, cfgcr1: 0x0, cfgcr2: 0x0 [ 12.538032] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 12.538048] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] disabled, scaler_id = -1 [ 12.538063] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 12.538078] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 12.538095] [drm:intel_dump_pipe_config [i915]] [CRTC:30:pipe B][setup_hw_state] config ffff9de5edd5f800 for pipe B [ 12.538110] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B [ 12.538125] [drm:intel_dump_pipe_config [i915]] pipe bpp: 0, dithering: 0 [ 12.538140] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 12.538156] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 12.538171] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 12.538187] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 12.538201] [drm:intel_dump_pipe_config [i915]] requested mode: [ 12.538203] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 12.538218] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 12.538220] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 12.538236] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 12.538250] [drm:intel_dump_pipe_config [i915]] port clock: 0 [ 12.538265] [drm:intel_dump_pipe_config [i915]] pipe src size: 0x0 [ 12.538280] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 12.538296] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 12.538311] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 12.538326] [drm:intel_dump_pipe_config [i915]] ips: 0 [ 12.538341] [drm:intel_dump_pipe_config [i915]] double wide: 0 [ 12.538356] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 12.538371] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 12.538386] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1B] disabled, scaler_id = -1 [ 12.538401] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor B] disabled, scaler_id = -1 [ 12.538416] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 2B] disabled, scaler_id = -1 [ 12.538436] [drm:intel_dump_pipe_config [i915]] [CRTC:34:pipe C][setup_hw_state] config ffff9de5edd5a000 for pipe C [ 12.538450] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C [ 12.538465] [drm:intel_dump_pipe_config [i915]] pipe bpp: 0, dithering: 0 [ 12.538480] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 12.538495] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 12.538511] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 12.538525] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 12.538540] [drm:intel_dump_pipe_config [i915]] requested mode: [ 12.538542] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 12.538557] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 12.538559] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 12.538574] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 12.538589] [drm:intel_dump_pipe_config [i915]] port clock: 0 [ 12.538604] [drm:intel_dump_pipe_config [i915]] pipe src size: 0x0 [ 12.538619] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 12.538634] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 12.538649] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 12.538664] [drm:intel_dump_pipe_config [i915]] ips: 0 [ 12.538679] [drm:intel_dump_pipe_config [i915]] double wide: 0 [ 12.538694] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 12.538708] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 12.538723] [drm:intel_dump_pipe_config [i915]] [PLANE:32:plane 1C] disabled, scaler_id = -1 [ 12.538738] [drm:intel_dump_pipe_config [i915]] [PLANE:33:cursor C] disabled, scaler_id = -1 [ 12.538753] [drm:intel_dump_pipe_config [i915]] [PLANE:35:plane 2C] disabled, scaler_id = -1 [ 12.538773] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 enabled but not in use, disabling [ 12.540418] [drm:intel_power_well_disable [i915]] disabling DDI D power well [ 12.540443] [drm:skl_set_power_well [i915]] Disabling DDI D power well [ 12.540464] [drm:intel_power_well_disable [i915]] disabling DDI C power well [ 12.540485] [drm:skl_set_power_well [i915]] Disabling DDI C power well [ 12.540505] [drm:intel_power_well_disable [i915]] disabling DDI B power well [ 12.540524] [drm:skl_set_power_well [i915]] Disabling DDI B power well [ 12.540544] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 12.540565] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 12.540594] [drm:skylake_get_initial_plane_config [i915]] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 12.540618] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 12.540649] [drm:_i915_gem_object_create_stolen [i915]] offset=0x0, size=8294400 [ 12.540675] [drm:intel_alloc_initial_plane_obj.isra.88 [i915]] initial plane fb obj ffff9de5eac00280 [ 12.540913] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [7e9000, fffff000] [ 12.540942] [drm:i915_gem_context_init [i915]] LR context support initialized [ 12.540966] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=1000 [ 12.540987] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7e9000, size=4096 [ 12.541010] [drm:intel_engine_create_scratch [i915]] render ring pipe control offset: 0xffffe000 [ 12.541055] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 [ 12.541074] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7ea000, size=16384 [ 12.541137] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 [ 12.541157] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7ee000, size=16384 [ 12.541193] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 [ 12.541212] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7f2000, size=16384 [ 12.541247] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 [ 12.541265] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7f6000, size=16384 [ 12.541334] [drm:gen8_init_common_ring [i915]] Execlists enabled for render ring [ 12.541403] [drm:gen8_init_common_ring [i915]] Execlists enabled for blitter ring [ 12.541465] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd ring [ 12.541521] [drm:gen8_init_common_ring [i915]] Execlists enabled for video enhancement ring [ 12.541578] [drm:intel_guc_setup [i915]] GuC fw status: path i915/skl_guc_ver6_1.bin, fetch NONE, load NONE [ 12.541584] [drm] GuC firmware load skipped [ 12.541610] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 12.541644] [drm:intel_fbdev_init [i915]] found possible fb from plane A [ 12.541666] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 12.541686] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 12.541705] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb [ 12.541723] [drm:intel_fbdev_init [i915]] pipe A area: 1920x1080, bpp: 32, size: 8294400 [ 12.541740] [drm:intel_fbdev_init [i915]] fb big enough for plane A (8294400 >= 8294400) [ 12.541756] [drm:intel_fbdev_init [i915]] pipe B not active, skipping [ 12.541772] [drm:intel_fbdev_init [i915]] pipe C not active, skipping [ 12.541787] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console [ 12.541985] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered [ 12.542013] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card1-eDP-1 [ 12.542824] [drm:intel_opregion_register [i915]] More than 15 outputs detected via ACPI [ 12.542888] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 12.542890] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 1 [ 12.543087] [drm:intel_dp_detect [i915]] [CONNECTOR:37:eDP-1] [ 12.543110] [drm:intel_dp_long_pulse [i915]] Display Port TPS3 support: source yes, sink yes [ 12.543131] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 12.543149] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 12.543167] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 12.543558] [drm:intel_dp_long_pulse [i915]] Sink OUI: 0022b9 [ 12.543892] [drm:intel_dp_long_pulse [i915]] Branch OUI: 000000 [ 12.544192] [drm:drm_helper_hpd_irq_event] [CONNECTOR:37:eDP-1] status updated from unknown to connected [ 12.544197] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 12.544225] [drm:intel_dp_detect [i915]] [CONNECTOR:37:eDP-1] [ 12.544250] [drm:intel_dp_long_pulse [i915]] Display Port TPS3 support: source yes, sink yes [ 12.544273] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 12.544293] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 12.544311] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 12.544836] [drm:intel_dp_long_pulse [i915]] Sink OUI: 0022b9 [ 12.545172] [drm:intel_dp_long_pulse [i915]] Branch OUI: 000000 [ 12.545522] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 12.545525] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 12.545528] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 12.545530] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 110900 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9 [ 12.545533] [drm:drm_setup_crtcs] [ 12.545535] [drm:drm_setup_crtcs] connector 37 enabled? yes [ 12.545559] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1 [ 12.545580] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0 [ 12.545600] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:26:pipe A]: 1920x1080 [ 12.545602] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 12.545621] [drm:intelfb_create [i915]] re-using BIOS fb [ 12.545641] [drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00000000 [ 12.545679] fbcon: inteldrmfb (fb0) is primary device [ 12.545731] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5eb1ec800 [ 12.545734] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5eb327e40 state to ffff9de5eb1ec800 [ 12.545737] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5eb1ed000 state to ffff9de5eb1ec800 [ 12.545739] [drm:drm_atomic_get_plane_state] Added [PLANE:25:cursor A] ffff9de5eb327f00 state to ffff9de5eb1ec800 [ 12.545740] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5eb327f00 to [NOCRTC] [ 12.545742] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5eb327f00 [ 12.545744] [drm:drm_atomic_get_plane_state] Added [PLANE:27:plane 2A] ffff9de5ede8f240 state to ffff9de5eb1ec800 [ 12.545745] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ede8f240 to [NOCRTC] [ 12.545747] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ede8f240 [ 12.545749] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane 1B] ffff9de5ede8ff00 state to ffff9de5eb1ec800 [ 12.545751] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor B] ffff9de5ede8f300 state to ffff9de5eb1ec800 [ 12.545752] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ede8f300 to [NOCRTC] [ 12.545753] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ede8f300 [ 12.545755] [drm:drm_atomic_get_plane_state] Added [PLANE:31:plane 2B] ffff9de5ede8f180 state to ffff9de5eb1ec800 [ 12.545757] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ede8f180 to [NOCRTC] [ 12.545758] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ede8f180 [ 12.545760] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane 1C] ffff9de5ede1d480 state to ffff9de5eb1ec800 [ 12.545762] [drm:drm_atomic_get_plane_state] Added [PLANE:33:cursor C] ffff9de5ede1d0c0 state to ffff9de5eb1ec800 [ 12.545763] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ede1d0c0 to [NOCRTC] [ 12.545764] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ede1d0c0 [ 12.545766] [drm:drm_atomic_get_plane_state] Added [PLANE:35:plane 2C] ffff9de5ede1d3c0 state to ffff9de5eb1ec800 [ 12.545768] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ede1d3c0 to [NOCRTC] [ 12.545769] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ede1d3c0 [ 12.545771] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff9de5eb1ed000 [ 12.545773] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5eb327e40 to [CRTC:26:pipe A] [ 12.545775] [drm:drm_atomic_set_fb_for_plane] Set [FB:46] for plane state ffff9de5eb327e40 [ 12.545777] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5eb1ec800 [ 12.545779] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5dc142120 state to ffff9de5eb1ec800 [ 12.545781] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5dc142120 to [NOCRTC] [ 12.545782] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5dc142120 to [CRTC:26:pipe A] [ 12.545785] [drm:drm_atomic_get_crtc_state] Added [CRTC:30:pipe B] ffff9de5eb1ed800 state to ffff9de5eb1ec800 [ 12.545786] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5eb1ed800 [ 12.545788] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ede8ff00 to [NOCRTC] [ 12.545789] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ede8ff00 [ 12.545791] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:pipe B] to ffff9de5eb1ec800 [ 12.545793] [drm:drm_atomic_get_crtc_state] Added [CRTC:34:pipe C] ffff9de5eb1ee000 state to ffff9de5eb1ec800 [ 12.545794] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5eb1ee000 [ 12.545795] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ede1d480 to [NOCRTC] [ 12.545797] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ede1d480 [ 12.545799] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:pipe C] to ffff9de5eb1ec800 [ 12.545800] [drm:drm_atomic_check_only] checking ffff9de5eb1ec800 [ 12.545803] [drm:drm_atomic_helper_check_modeset] [CRTC:26:pipe A] mode changed [ 12.545805] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:eDP-1] [ 12.545807] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:DDI A], now on [CRTC:26:pipe A] [ 12.545808] [drm:drm_atomic_helper_check_modeset] [CRTC:26:pipe A] needs all connectors, enable: y, active: y [ 12.545810] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5eb1ec800 [ 12.545812] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5eb1ec800 [ 12.545838] [drm:intel_modeset_pipe_config [i915]] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 12.545860] [drm:intel_modeset_pipe_config [i915]] clamping display bpp (was 36) to EDID reported max of 18 [ 12.545883] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 12.545907] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138700KHz [ 12.545928] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18 [ 12.545947] [drm:intel_dp_compute_config [i915]] DP link bw required 249660 available 432000 [ 12.545970] [drm:intel_modeset_pipe_config [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 12.545993] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][modeset] config ffff9de5eb1ed000 for pipe A [ 12.546014] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP [ 12.546033] [drm:intel_dump_pipe_config [i915]] pipe bpp: 18, dithering: 1 [ 12.546051] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 12.546070] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 2, gmch_m: 4847916, gmch_n: 8388608, link_m: 269328, link_n: 524288, tu: 64 [ 12.546087] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 12.546104] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 12.546120] [drm:intel_dump_pipe_config [i915]] requested mode: [ 12.546122] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 12.546138] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 12.546140] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 12.546157] [drm:intel_dump_pipe_config [i915]] crtc timings: 138700 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0x9 [ 12.546173] [drm:intel_dump_pipe_config [i915]] port clock: 270000 [ 12.546189] [drm:intel_dump_pipe_config [i915]] pipe src size: 1920x1080 [ 12.546205] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 12.546221] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 12.546236] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 12.546251] [drm:intel_dump_pipe_config [i915]] ips: 0 [ 12.546267] [drm:intel_dump_pipe_config [i915]] double wide: 0 [ 12.546282] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x13, cfgcr1: 0x0, cfgcr2: 0x0 [ 12.546297] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 12.546328] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] enabled [ 12.546344] [drm:intel_dump_pipe_config [i915]] FB:46, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 12.546344] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 12.546360] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 12.546375] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 12.546396] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 [ 12.546419] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 12.546447] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 46 [ 12.546466] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 12.546497] [drm:intel_find_shared_dpll [i915]] [CRTC:26:pipe A] allocated DPLL 0 [ 12.546516] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A [ 12.546536] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 12.546544] [drm:drm_atomic_commit] commiting ffff9de5eb1ec800 [ 12.546573] [drm:intel_edp_backlight_off.part.27 [i915]] [ 12.678517] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 12.680584] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 12.681197] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 12.825379] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 12.825602] thermal thermal_zone2: failed to read out thermal zone (-5) [ 12.826271] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 13.740677] [drm] RC6 on [ 13.754595] NET: Registered protocol family 38 [ 13.804487] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 13.804524] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling [ 13.804567] [drm:intel_disable_pipe [i915]] disabling pipe A [ 13.814795] [drm:edp_panel_off [i915]] Turn eDP port A panel power off [ 13.814854] [drm:edp_panel_off [i915]] Wait for panel power off time [ 13.814925] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 13.865189] [drm:wait_panel_status [i915]] Wait complete [ 13.865215] [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 1, on? 1) for crtc 26 [ 13.865236] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 [ 13.865262] [drm:skl_set_cdclk [i915]] Changing CDCLK to 337500 kHz (VCO 8100000 kHz) [ 13.865286] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 13.865307] [drm:intel_atomic_commit_tail [i915]] [ENCODER:36:DDI A] [ 13.865327] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 0 [ 13.865345] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 1 [ 13.865362] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 2 [ 13.865379] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 3 [ 13.865401] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 13.865440] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 13.865488] [drm:edp_panel_on [i915]] Turn eDP port A panel power on [ 13.865513] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 13.867294] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 13.867316] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long [ 13.867335] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0 [ 13.867359] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A [ 13.892562] BTRFS: device fsid 56a12e89-2700-41ae-852d-41e09a233048 devid 1 transid 301092 /dev/dm-1 [ 13.951506] BTRFS: device fsid 56a12e89-2700-41ae-852d-41e09a233048 devid 2 transid 301092 /dev/dm-2 [ 14.046660] BTRFS: device fsid 56a12e89-2700-41ae-852d-41e09a233048 devid 3 transid 301092 /dev/dm-3 [ 14.220562] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 08000001 control 00000000 [ 14.247519] [drm:wait_panel_status [i915]] Wait complete [ 14.247562] [drm:edp_panel_on [i915]] Wait for panel power on [ 14.247634] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 0000000a control 00000003 [ 14.383281] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 14.383306] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long [ 14.383328] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1 [ 14.383359] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A [ 14.447784] [drm:wait_panel_status [i915]] Wait complete [ 14.447821] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 14.447884] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 14.448986] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 14.449007] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 14.449026] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 14.449043] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 14.449671] [drm:intel_dp_start_link_train [i915]] clock recovery OK [ 14.449687] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3 [ 14.450615] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful [ 14.450790] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff9de5eb1ed000 [ 14.451012] [drm:intel_enable_pipe [i915]] enabling pipe A [ 14.451034] [drm:intel_edp_backlight_on.part.26 [i915]] [ 14.451053] [drm:intel_panel_enable_backlight [i915]] pipe A [ 14.451122] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 130 [ 14.451179] [drm:intel_psr_enable [i915]] PSR disable by flag [ 14.451196] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS [ 14.484456] [drm:verify_connector_state [i915]] [CONNECTOR:37:eDP-1] [ 14.484478] [drm:intel_atomic_commit_tail [i915]] [CRTC:26:pipe A] [ 14.484506] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 0 [ 14.484527] [drm:intel_enable_sagv [i915]] Enabling the SAGV [ 14.484534] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5eb1ec800 [ 14.484538] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5eb1ec800 [ 14.484543] [drm:drm_fb_helper_hotplug_event] [ 14.484544] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 14.484563] [drm:intel_dp_detect [i915]] [CONNECTOR:37:eDP-1] [ 14.484580] [drm:intel_dp_long_pulse [i915]] Display Port TPS3 support: source yes, sink yes [ 14.484596] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 14.484610] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 14.484624] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 14.484957] [drm:intel_dp_long_pulse [i915]] Sink OUI: 0022b9 [ 14.485288] [drm:intel_dp_long_pulse [i915]] Branch OUI: 000000 [ 14.485639] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 14.485642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 14.485644] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 14.485645] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 110900 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9 [ 14.485648] [drm:drm_setup_crtcs] [ 14.485649] [drm:drm_setup_crtcs] connector 37 enabled? yes [ 14.485668] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1 [ 14.485685] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0 [ 14.485700] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:26:pipe A]: 1920x1080 [ 14.485704] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 14.485709] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5d51a1000 [ 14.485712] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5eed41600 state to ffff9de5d51a1000 [ 14.485714] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5d51a1800 state to ffff9de5d51a1000 [ 14.485715] [drm:drm_atomic_get_plane_state] Added [PLANE:25:cursor A] ffff9de5eed410c0 state to ffff9de5d51a1000 [ 14.485717] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5eed410c0 to [NOCRTC] [ 14.485718] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5eed410c0 [ 14.485720] [drm:drm_atomic_get_plane_state] Added [PLANE:27:plane 2A] ffff9de5eed41000 state to ffff9de5d51a1000 [ 14.485721] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5eed41000 to [NOCRTC] [ 14.485722] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5eed41000 [ 14.485723] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane 1B] ffff9de5eed413c0 state to ffff9de5d51a1000 [ 14.485725] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor B] ffff9de5eed41540 state to ffff9de5d51a1000 [ 14.485726] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5eed41540 to [NOCRTC] [ 14.485727] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5eed41540 [ 14.485729] [drm:drm_atomic_get_plane_state] Added [PLANE:31:plane 2B] ffff9de5eed41300 state to ffff9de5d51a1000 [ 14.485730] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5eed41300 to [NOCRTC] [ 14.485731] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5eed41300 [ 14.485733] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane 1C] ffff9de5eed41180 state to ffff9de5d51a1000 [ 14.485734] [drm:drm_atomic_get_plane_state] Added [PLANE:33:cursor C] ffff9de5eed41240 state to ffff9de5d51a1000 [ 14.485735] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5eed41240 to [NOCRTC] [ 14.485736] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5eed41240 [ 14.485738] [drm:drm_atomic_get_plane_state] Added [PLANE:35:plane 2C] ffff9de5dbc19600 state to ffff9de5d51a1000 [ 14.485739] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5dbc19600 to [NOCRTC] [ 14.485740] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5dbc19600 [ 14.485742] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff9de5d51a1800 [ 14.485744] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5eed41600 to [CRTC:26:pipe A] [ 14.485745] [drm:drm_atomic_set_fb_for_plane] Set [FB:46] for plane state ffff9de5eed41600 [ 14.485747] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5d51a1000 [ 14.485749] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5eea927e0 state to ffff9de5d51a1000 [ 14.485751] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5eea927e0 to [NOCRTC] [ 14.485752] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5eea927e0 to [CRTC:26:pipe A] [ 14.485754] [drm:drm_atomic_get_crtc_state] Added [CRTC:30:pipe B] ffff9de5d51a2000 state to ffff9de5d51a1000 [ 14.485755] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5d51a2000 [ 14.485756] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5eed413c0 to [NOCRTC] [ 14.485758] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5eed413c0 [ 14.485759] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:pipe B] to ffff9de5d51a1000 [ 14.485761] [drm:drm_atomic_get_crtc_state] Added [CRTC:34:pipe C] ffff9de5d51a2800 state to ffff9de5d51a1000 [ 14.485762] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5d51a2800 [ 14.485763] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5eed41180 to [NOCRTC] [ 14.485765] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5eed41180 [ 14.485766] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:pipe C] to ffff9de5d51a1000 [ 14.485767] [drm:drm_atomic_check_only] checking ffff9de5d51a1000 [ 14.485770] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:eDP-1] [ 14.485772] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:DDI A], now on [CRTC:26:pipe A] [ 14.485795] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 14.485813] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 46 [ 14.485831] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 14.485837] [drm:drm_atomic_commit] commiting ffff9de5d51a1000 [ 14.501091] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5d51a1000 [ 14.501094] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5d51a1000 [ 14.501099] Console: switching to colour frame buffer device 240x67 [ 14.501109] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5d51a1000 [ 14.501111] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5d51a3000 state to ffff9de5d51a1000 [ 14.501112] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5ede1d0c0 state to ffff9de5d51a1000 [ 14.501114] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff9de5d51a3000 [ 14.501116] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ede1d0c0 to [CRTC:26:pipe A] [ 14.501117] [drm:drm_atomic_set_fb_for_plane] Set [FB:46] for plane state ffff9de5ede1d0c0 [ 14.501119] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5d51a1000 [ 14.501120] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5eea92980 state to ffff9de5d51a1000 [ 14.501122] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5eea92980 to [NOCRTC] [ 14.501123] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5eea92980 to [CRTC:26:pipe A] [ 14.501125] [drm:drm_atomic_get_crtc_state] Added [CRTC:30:pipe B] ffff9de5d51a3800 state to ffff9de5d51a1000 [ 14.501126] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane 1B] ffff9de5ede1d600 state to ffff9de5d51a1000 [ 14.501128] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5d51a3800 [ 14.501129] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ede1d600 to [NOCRTC] [ 14.501130] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ede1d600 [ 14.501131] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:pipe B] to ffff9de5d51a1000 [ 14.501133] [drm:drm_atomic_get_crtc_state] Added [CRTC:34:pipe C] ffff9de5d51a4000 state to ffff9de5d51a1000 [ 14.501134] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane 1C] ffff9de5ede1d540 state to ffff9de5d51a1000 [ 14.501136] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5d51a4000 [ 14.501137] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ede1d540 to [NOCRTC] [ 14.501138] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ede1d540 [ 14.501139] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:pipe C] to ffff9de5d51a1000 [ 14.501141] [drm:drm_atomic_check_only] checking ffff9de5d51a1000 [ 14.501143] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:eDP-1] [ 14.501144] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:DDI A], now on [CRTC:26:pipe A] [ 14.501163] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 14.501180] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 46 [ 14.501196] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 14.501201] [drm:drm_atomic_commit] commiting ffff9de5d51a1000 [ 14.517751] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5d51a1000 [ 14.517754] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5d51a1000 [ 14.523010] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 14.528041] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=416/416 [ 14.528078] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 416 [ 14.532051] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 14.532072] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 14.572179] BTRFS info (device dm-3): disk space caching is enabled [ 14.608599] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line [ 14.608602] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 14.608603] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 14.608604] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 14.608606] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 14.608607] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 14.608608] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 14.608610] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 14.652246] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 14.653586] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 14.654023] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 14.654089] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 14.654148] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 14.654206] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 14.654262] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 14.654323] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 14.654347] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 14.673338] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 14.906974] BTRFS info (device dm-3): detected SSD devices, enabling SSD mode [ 15.017996] bbswitch: version 0.8 [ 15.018001] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 15.018007] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP [ 15.018018] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 15.018112] bbswitch: detected an Optimus _DSM function [ 15.018120] bbswitch: device 0000:01:00.0 is in use by driver 'nvidia', refusing OFF [ 15.018122] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 15.023220] [drm] [nvidia-drm] [GPU ID 0x00000100] Unloading driver [ 15.032519] nvidia-modeset: Unloading [ 15.039540] nvidia-nvlink: Unregistered the Nvlink Core, major device number 248 [ 15.047563] bbswitch: disabling discrete graphics [ 15.047573] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 15.059421] pci 0000:01:00.0: Refused to change power state, currently in D0 [ 15.071693] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.071694] Bluetooth: BNEP filters: protocol multicast [ 15.071698] Bluetooth: BNEP socket layer initialized [ 15.300357] [drm:i915_gem_open [i915]] [ 15.300413] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5edf62800 [ 15.300430] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5ead42b40 state to ffff9de5edf62800 [ 15.300434] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5edf64000 state to ffff9de5edf62800 [ 15.300437] [drm:drm_atomic_get_plane_state] Added [PLANE:25:cursor A] ffff9de5ead429c0 state to ffff9de5edf62800 [ 15.300442] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ead429c0 to [NOCRTC] [ 15.300445] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ead429c0 [ 15.300447] [drm:drm_atomic_get_plane_state] Added [PLANE:27:plane 2A] ffff9de5ead42840 state to ffff9de5edf62800 [ 15.300450] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ead42840 to [NOCRTC] [ 15.300452] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ead42840 [ 15.300455] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane 1B] ffff9de5ead426c0 state to ffff9de5edf62800 [ 15.300457] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor B] ffff9de5ead42600 state to ffff9de5edf62800 [ 15.300460] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ead42600 to [NOCRTC] [ 15.300462] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ead42600 [ 15.300465] [drm:drm_atomic_get_plane_state] Added [PLANE:31:plane 2B] ffff9de5ead42e40 state to ffff9de5edf62800 [ 15.300467] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ead42e40 to [NOCRTC] [ 15.300469] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ead42e40 [ 15.300472] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane 1C] ffff9de5ead42480 state to ffff9de5edf62800 [ 15.300474] [drm:drm_atomic_get_plane_state] Added [PLANE:33:cursor C] ffff9de5ead42240 state to ffff9de5edf62800 [ 15.300477] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ead42240 to [NOCRTC] [ 15.300479] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ead42240 [ 15.300482] [drm:drm_atomic_get_plane_state] Added [PLANE:35:plane 2C] ffff9de5ead423c0 state to ffff9de5edf62800 [ 15.300484] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ead423c0 to [NOCRTC] [ 15.300486] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ead423c0 [ 15.300490] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff9de5edf64000 [ 15.300492] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ead42b40 to [CRTC:26:pipe A] [ 15.300495] [drm:drm_atomic_set_fb_for_plane] Set [FB:46] for plane state ffff9de5ead42b40 [ 15.300498] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5edf62800 [ 15.300502] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5dc142680 state to ffff9de5edf62800 [ 15.300505] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5dc142680 to [NOCRTC] [ 15.300508] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5dc142680 to [CRTC:26:pipe A] [ 15.300512] [drm:drm_atomic_get_crtc_state] Added [CRTC:30:pipe B] ffff9de5edf67800 state to ffff9de5edf62800 [ 15.300516] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5edf67800 [ 15.300519] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ead426c0 to [NOCRTC] [ 15.300522] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ead426c0 [ 15.300525] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:pipe B] to ffff9de5edf62800 [ 15.300530] [drm:drm_atomic_get_crtc_state] Added [CRTC:34:pipe C] ffff9de5edf65000 state to ffff9de5edf62800 [ 15.300533] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5edf65000 [ 15.300536] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ead42480 to [NOCRTC] [ 15.300540] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ead42480 [ 15.300544] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:pipe C] to ffff9de5edf62800 [ 15.300547] [drm:drm_atomic_check_only] checking ffff9de5edf62800 [ 15.300555] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:eDP-1] [ 15.300559] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:DDI A], now on [CRTC:26:pipe A] [ 15.300599] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 15.300626] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 46 [ 15.300649] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 15.300661] [drm:drm_atomic_commit] commiting ffff9de5edf62800 [ 15.317456] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5edf62800 [ 15.317467] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5edf62800 [ 15.344799] [drm:i915_gem_open [i915]] [ 15.345583] [drm:drm_mode_addfb2] [FB:48] [ 15.345728] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 [ 15.345751] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7fa000, size=16384 [ 15.345865] [drm:drm_internal_framebuffer_create] could not create framebuffer [ 15.345875] [drm:drm_mode_addfb2] [FB:48] [ 15.345884] [drm:drm_mode_addfb2] [FB:48] [ 15.381794] [drm:drm_mode_addfb2] [FB:48] [ 15.382035] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5f0a84800 [ 15.382041] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5ea82c800 state to ffff9de5f0a84800 [ 15.382043] [drm:drm_atomic_check_only] checking ffff9de5f0a84800 [ 15.382051] [drm:drm_atomic_commit] commiting ffff9de5f0a84800 [ 15.384078] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5f0a84800 [ 15.384087] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5f0a84800 [ 15.455140] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready [ 15.479658] r8169 0000:02:00.1 enp2s0f1: link down [ 15.479708] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready [ 15.485201] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 15.486513] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 15.486778] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 15.622521] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 15.622784] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 15.716558] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 15.724525] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 15.725151] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 15.811322] [drm:drm_mode_setcrtc] [CRTC:26:pipe A] [ 15.811328] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 15.811333] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5d1e52800 [ 15.811337] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5d1e53000 state to ffff9de5d1e52800 [ 15.811341] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5d25ecd80 state to ffff9de5d1e52800 [ 15.811344] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff9de5d1e53000 [ 15.811347] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5d25ecd80 to [CRTC:26:pipe A] [ 15.811350] [drm:drm_atomic_set_fb_for_plane] Set [FB:48] for plane state ffff9de5d25ecd80 [ 15.811353] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5d1e52800 [ 15.811356] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5ec5ab920 state to ffff9de5d1e52800 [ 15.811359] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5ec5ab920 to [NOCRTC] [ 15.811362] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5ec5ab920 to [CRTC:26:pipe A] [ 15.811364] [drm:drm_atomic_check_only] checking ffff9de5d1e52800 [ 15.811369] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:eDP-1] [ 15.811372] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:DDI A], now on [CRTC:26:pipe A] [ 15.811408] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 15.811440] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 48 [ 15.811471] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 15.811481] [drm:drm_atomic_commit] commiting ffff9de5d1e52800 [ 15.817333] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5d1e52800 [ 15.817338] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5d1e52800 [ 15.868449] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 15.868713] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 15.957296] [drm:i915_gem_open [i915]] [ 15.957984] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 15.968206] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created [ 15.968732] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 [ 15.968751] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7fe000, size=16384 [ 15.969080] [drm:i915_gem_context_destroy_ioctl [i915]] HW context 1 destroyed [ 15.988843] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 16.492454] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 16.492511] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 16.492528] [drm:intel_power_well_disable [i915]] disabling DC off [ 16.492554] [drm:skl_enable_dc6 [i915]] Enabling DC6 [ 16.492569] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 [ 16.655761] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created [ 16.656151] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 [ 16.656163] [drm:_i915_gem_object_create_stolen [i915]] offset=0x802000, size=16384 [ 16.713908] [drm:drm_mode_addfb2] [FB:47] [ 16.717227] [drm:drm_mode_addfb2] [FB:50] [ 16.733737] [drm:drm_mode_addfb2] [FB:52] [ 17.346254] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 17.346285] [drm:intel_dp_detect [i915]] [CONNECTOR:37:eDP-1] [ 17.346307] [drm:intel_power_well_enable [i915]] enabling DC off [ 17.346328] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00 [ 17.346356] [drm:intel_dp_long_pulse [i915]] Display Port TPS3 support: source yes, sink yes [ 17.346379] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 17.346402] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 17.346423] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 17.346468] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 17.346540] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 17.346912] [drm:intel_dp_long_pulse [i915]] Sink OUI: 0022b9 [ 17.347263] [drm:intel_dp_long_pulse [i915]] Branch OUI: 000000 [ 17.347647] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 17.347651] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 17.347655] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 17.347658] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 110900 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9 [ 17.655796] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 [ 17.655837] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7fe000, size=16384 [ 17.727583] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5edd5b000 [ 17.727589] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5ead42000 state to ffff9de5edd5b000 [ 17.727593] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5edd5b800 state to ffff9de5edd5b000 [ 17.727596] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ead42000 to [NOCRTC] [ 17.727599] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ead42000 [ 17.727601] [drm:drm_atomic_check_only] checking ffff9de5edd5b000 [ 17.727637] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 17.727662] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb -1 [ 17.727685] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 1 -> 0, off 1, on 0, ms 0 [ 17.727693] [drm:drm_atomic_commit] commiting ffff9de5edd5b000 [ 17.733364] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5edd5b000 [ 17.733369] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5edd5b000 [ 17.733489] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5d51a7000 [ 17.733494] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5ee115d80 state to ffff9de5d51a7000 [ 17.733497] [drm:drm_atomic_get_plane_state] Added [PLANE:25:cursor A] ffff9de5ee115e40 state to ffff9de5d51a7000 [ 17.733499] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115e40 to [NOCRTC] [ 17.733502] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115e40 [ 17.733505] [drm:drm_atomic_get_plane_state] Added [PLANE:27:plane 2A] ffff9de5ee115f00 state to ffff9de5d51a7000 [ 17.733507] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115f00 to [NOCRTC] [ 17.733509] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115f00 [ 17.733512] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane 1B] ffff9de5ee115c00 state to ffff9de5d51a7000 [ 17.733515] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor B] ffff9de5ee115b40 state to ffff9de5d51a7000 [ 17.733517] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115b40 to [NOCRTC] [ 17.733519] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115b40 [ 17.733522] [drm:drm_atomic_get_plane_state] Added [PLANE:31:plane 2B] ffff9de5ee115a80 state to ffff9de5d51a7000 [ 17.733524] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115a80 to [NOCRTC] [ 17.733526] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115a80 [ 17.733528] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane 1C] ffff9de5ee1159c0 state to ffff9de5d51a7000 [ 17.733531] [drm:drm_atomic_get_plane_state] Added [PLANE:33:cursor C] ffff9de5ee115900 state to ffff9de5d51a7000 [ 17.733533] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115900 to [NOCRTC] [ 17.733535] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115900 [ 17.733538] [drm:drm_atomic_get_plane_state] Added [PLANE:35:plane 2C] ffff9de5ee115840 state to ffff9de5d51a7000 [ 17.733540] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115840 to [NOCRTC] [ 17.733542] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115840 [ 17.733545] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5d51a5800 state to ffff9de5d51a7000 [ 17.733549] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff9de5d51a5800 [ 17.733552] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115d80 to [CRTC:26:pipe A] [ 17.733555] [drm:drm_atomic_set_fb_for_plane] Set [FB:46] for plane state ffff9de5ee115d80 [ 17.733557] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5d51a7000 [ 17.733561] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5daad4040 state to ffff9de5d51a7000 [ 17.733564] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5daad4040 to [NOCRTC] [ 17.733567] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5daad4040 to [CRTC:26:pipe A] [ 17.733570] [drm:drm_atomic_get_crtc_state] Added [CRTC:30:pipe B] ffff9de5d51a4000 state to ffff9de5d51a7000 [ 17.733573] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5d51a4000 [ 17.733576] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115c00 to [NOCRTC] [ 17.733578] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115c00 [ 17.733580] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:pipe B] to ffff9de5d51a7000 [ 17.733583] [drm:drm_atomic_get_crtc_state] Added [CRTC:34:pipe C] ffff9de5d51a3800 state to ffff9de5d51a7000 [ 17.733585] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5d51a3800 [ 17.733587] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee1159c0 to [NOCRTC] [ 17.733589] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee1159c0 [ 17.733592] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:pipe C] to ffff9de5d51a7000 [ 17.733594] [drm:drm_atomic_check_only] checking ffff9de5d51a7000 [ 17.733599] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:eDP-1] [ 17.733602] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:DDI A], now on [CRTC:26:pipe A] [ 17.733639] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 17.733664] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 46 [ 17.733688] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 0 -> 1, off 0, on 1, ms 0 [ 17.733699] [drm:drm_atomic_commit] commiting ffff9de5d51a7000 [ 17.750044] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5d51a7000 [ 17.750051] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5d51a7000 [ 17.750061] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5d51a7000 [ 17.750066] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5d51a3000 state to ffff9de5d51a7000 [ 17.750069] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5ee115540 state to ffff9de5d51a7000 [ 17.750073] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff9de5d51a3000 [ 17.750076] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115540 to [CRTC:26:pipe A] [ 17.750079] [drm:drm_atomic_set_fb_for_plane] Set [FB:46] for plane state ffff9de5ee115540 [ 17.750082] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5d51a7000 [ 17.750085] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5daad4060 state to ffff9de5d51a7000 [ 17.750087] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5daad4060 to [NOCRTC] [ 17.750090] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5daad4060 to [CRTC:26:pipe A] [ 17.750093] [drm:drm_atomic_get_crtc_state] Added [CRTC:30:pipe B] ffff9de5d51a6000 state to ffff9de5d51a7000 [ 17.750096] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane 1B] ffff9de5ee1156c0 state to ffff9de5d51a7000 [ 17.750098] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5d51a6000 [ 17.750100] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee1156c0 to [NOCRTC] [ 17.750103] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee1156c0 [ 17.750105] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:pipe B] to ffff9de5d51a7000 [ 17.750108] [drm:drm_atomic_get_crtc_state] Added [CRTC:34:pipe C] ffff9de5d51a5000 state to ffff9de5d51a7000 [ 17.750111] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane 1C] ffff9de5ee115480 state to ffff9de5d51a7000 [ 17.750113] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5d51a5000 [ 17.750115] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115480 to [NOCRTC] [ 17.750117] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115480 [ 17.750120] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:pipe C] to ffff9de5d51a7000 [ 17.750122] [drm:drm_atomic_check_only] checking ffff9de5d51a7000 [ 17.750128] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:eDP-1] [ 17.750130] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:DDI A], now on [CRTC:26:pipe A] [ 17.750166] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 17.750190] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 46 [ 17.750213] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 17.750223] [drm:drm_atomic_commit] commiting ffff9de5d51a7000 [ 17.766692] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5d51a7000 [ 17.766699] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5d51a7000 [ 17.766722] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5d51a7000 [ 17.766727] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5d51a3800 state to ffff9de5d51a7000 [ 17.766731] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5ee1159c0 state to ffff9de5d51a7000 [ 17.766734] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff9de5d51a3800 [ 17.766737] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee1159c0 to [CRTC:26:pipe A] [ 17.766740] [drm:drm_atomic_set_fb_for_plane] Set [FB:46] for plane state ffff9de5ee1159c0 [ 17.766743] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5d51a7000 [ 17.766746] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5daad4040 state to ffff9de5d51a7000 [ 17.766748] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5daad4040 to [NOCRTC] [ 17.766751] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5daad4040 to [CRTC:26:pipe A] [ 17.766754] [drm:drm_atomic_get_crtc_state] Added [CRTC:30:pipe B] ffff9de5d51a4000 state to ffff9de5d51a7000 [ 17.766757] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane 1B] ffff9de5ee115d80 state to ffff9de5d51a7000 [ 17.766759] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5d51a4000 [ 17.766761] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115d80 to [NOCRTC] [ 17.766763] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115d80 [ 17.766766] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:pipe B] to ffff9de5d51a7000 [ 17.766769] [drm:drm_atomic_get_crtc_state] Added [CRTC:34:pipe C] ffff9de5d51a5800 state to ffff9de5d51a7000 [ 17.766771] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane 1C] ffff9de5ee115180 state to ffff9de5d51a7000 [ 17.766773] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5d51a5800 [ 17.766775] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115180 to [NOCRTC] [ 17.766777] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115180 [ 17.766780] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:pipe C] to ffff9de5d51a7000 [ 17.766782] [drm:drm_atomic_check_only] checking ffff9de5d51a7000 [ 17.766788] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:eDP-1] [ 17.766790] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:DDI A], now on [CRTC:26:pipe A] [ 17.766827] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 17.766852] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 46 [ 17.766875] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 17.766885] [drm:drm_atomic_commit] commiting ffff9de5d51a7000 [ 17.783351] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5d51a7000 [ 17.783359] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5d51a7000 [ 19.272487] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 19.273138] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 19.372526] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 19.372578] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 19.372590] [drm:intel_power_well_disable [i915]] disabling DC off [ 19.372602] [drm:skl_enable_dc6 [i915]] Enabling DC6 [ 19.372613] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 [ 19.410085] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 19.410349] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 19.504534] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 22.614536] wlp3s0: authenticate with 44:32:c8:a3:74:27 [ 22.619493] wlp3s0: send auth to 44:32:c8:a3:74:27 (try 1/3) [ 22.744240] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5efb75800 [ 22.744243] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5efb75000 state to ffff9de5efb75800 [ 22.744245] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5ef9da900 state to ffff9de5efb75800 [ 22.744248] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff9de5efb75000 [ 22.744250] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ef9da900 to [CRTC:26:pipe A] [ 22.744252] [drm:drm_atomic_set_fb_for_plane] Set [FB:46] for plane state ffff9de5ef9da900 [ 22.744254] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5efb75800 [ 22.744256] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5d1d04380 state to ffff9de5efb75800 [ 22.744257] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5d1d04380 to [NOCRTC] [ 22.744259] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5d1d04380 to [CRTC:26:pipe A] [ 22.744261] [drm:drm_atomic_get_crtc_state] Added [CRTC:30:pipe B] ffff9de5efb74800 state to ffff9de5efb75800 [ 22.744262] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane 1B] ffff9de5ef9da180 state to ffff9de5efb75800 [ 22.744264] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5efb74800 [ 22.744265] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ef9da180 to [NOCRTC] [ 22.744266] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ef9da180 [ 22.744268] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:pipe B] to ffff9de5efb75800 [ 22.744270] [drm:drm_atomic_get_crtc_state] Added [CRTC:34:pipe C] ffff9de5efb74000 state to ffff9de5efb75800 [ 22.744271] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane 1C] ffff9de5ef9da600 state to ffff9de5efb75800 [ 22.744272] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5efb74000 [ 22.744274] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ef9da600 to [NOCRTC] [ 22.744275] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ef9da600 [ 22.744276] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:pipe C] to ffff9de5efb75800 [ 22.744278] [drm:drm_atomic_check_only] checking ffff9de5efb75800 [ 22.744281] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:eDP-1] [ 22.744283] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:DDI A], now on [CRTC:26:pipe A] [ 22.744307] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 22.744321] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 46 [ 22.744334] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 22.744342] [drm:drm_atomic_commit] commiting ffff9de5efb75800 [ 22.748314] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5efb75800 [ 22.748317] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5efb75800 [ 22.748454] wlp3s0: send auth to 44:32:c8:a3:74:27 (try 2/3) [ 22.751533] wlp3s0: authenticated [ 22.755154] wlp3s0: associate with 44:32:c8:a3:74:27 (try 1/3) [ 22.762057] wlp3s0: RX AssocResp from 44:32:c8:a3:74:27 (capab=0x411 status=0 aid=4) [ 22.765755] wlp3s0: associated [ 22.765786] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 27.424887] wlp3s0: deauthenticating from 44:32:c8:a3:74:27 by local choice (Reason: 3=DEAUTH_LEAVING) [ 27.447505] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 27.448129] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 27.592753] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 27.593016] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 27.688359] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 27.707357] PM: Syncing filesystems ... done. [ 27.732010] PM: Preparing system for sleep (mem) [ 27.732769] bbswitch: enabling discrete graphics [ 27.880279] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 27.881736] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 27.882545] PM: Suspending system (mem) [ 27.882571] Suspending console(s) (use no_console_suspend to debug) [ 27.883127] sd 3:0:0:0: [sdd] Synchronizing SCSI cache [ 27.883148] sd 2:0:0:0: [sdc] Synchronizing SCSI cache [ 27.883180] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 27.883305] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 27.884111] sd 3:0:0:0: [sdd] Stopping disk [ 27.885972] sd 0:0:0:0: [sda] Stopping disk [ 27.888188] sd 1:0:0:0: [sdb] Stopping disk [ 27.894256] sd 2:0:0:0: [sdc] Stopping disk [ 28.467548] ACPI : EC: event blocked [ 28.467678] [drm:intel_power_well_enable [i915]] enabling DC off [ 28.467697] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00 [ 28.467719] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 28.467736] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 28.467763] [drm:intel_power_well_enable [i915]] enabling DDI B power well [ 28.467779] [drm:skl_set_power_well [i915]] Enabling DDI B power well [ 28.467795] [drm:intel_power_well_enable [i915]] enabling DDI C power well [ 28.467811] [drm:skl_set_power_well [i915]] Enabling DDI C power well [ 28.467826] [drm:intel_power_well_enable [i915]] enabling DDI D power well [ 28.467842] [drm:skl_set_power_well [i915]] Enabling DDI D power well [ 28.468158] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5d055d000 [ 28.468163] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5d055d800 state to ffff9de5d055d000 [ 28.468167] [drm:drm_atomic_get_crtc_state] Added [CRTC:30:pipe B] ffff9de5d055e000 state to ffff9de5d055d000 [ 28.468170] [drm:drm_atomic_get_crtc_state] Added [CRTC:34:pipe C] ffff9de5d055e800 state to ffff9de5d055d000 [ 28.468173] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5ef9da3c0 state to ffff9de5d055d000 [ 28.468175] [drm:drm_atomic_get_plane_state] Added [PLANE:25:cursor A] ffff9de5ef9da540 state to ffff9de5d055d000 [ 28.468178] [drm:drm_atomic_get_plane_state] Added [PLANE:27:plane 2A] ffff9de5ef9da9c0 state to ffff9de5d055d000 [ 28.468181] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane 1B] ffff9de5ef9da480 state to ffff9de5d055d000 [ 28.468184] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor B] ffff9de5eac63480 state to ffff9de5d055d000 [ 28.468186] [drm:drm_atomic_get_plane_state] Added [PLANE:31:plane 2B] ffff9de5eac633c0 state to ffff9de5d055d000 [ 28.468189] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane 1C] ffff9de5ebc46d80 state to ffff9de5d055d000 [ 28.468191] [drm:drm_atomic_get_plane_state] Added [PLANE:33:cursor C] ffff9de5ebc46e40 state to ffff9de5d055d000 [ 28.468194] [drm:drm_atomic_get_plane_state] Added [PLANE:35:plane 2C] ffff9de5ebc469c0 state to ffff9de5d055d000 [ 28.468197] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5ec5abf40 state to ffff9de5d055d000 [ 28.468200] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5d055f000 [ 28.468202] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5d055f800 state to ffff9de5d055f000 [ 28.468204] [drm:drm_atomic_check_only] checking ffff9de5d055f000 [ 28.468209] [drm:drm_atomic_helper_check_modeset] [CRTC:26:pipe A] active changed [ 28.468211] [drm:drm_atomic_helper_check_modeset] [CRTC:26:pipe A] needs all connectors, enable: y, active: n [ 28.468214] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5d055f000 [ 28.468216] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5ec5ab3c0 state to ffff9de5d055f000 [ 28.468219] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5ecc24cc0 state to ffff9de5d055f000 [ 28.468222] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5d055f000 [ 28.468251] [drm:intel_modeset_pipe_config [i915]] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 28.468274] [drm:intel_modeset_pipe_config [i915]] clamping display bpp (was 36) to EDID reported max of 18 [ 28.468300] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 28.468323] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138700KHz [ 28.468344] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18 [ 28.468363] [drm:intel_dp_compute_config [i915]] DP link bw required 249660 available 432000 [ 28.468384] [drm:intel_modeset_pipe_config [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 28.468407] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][modeset] config ffff9de5d055f800 for pipe A [ 28.468438] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP [ 28.468456] [drm:intel_dump_pipe_config [i915]] pipe bpp: 18, dithering: 1 [ 28.468475] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 28.468493] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 2, gmch_m: 4847916, gmch_n: 8388608, link_m: 269328, link_n: 524288, tu: 64 [ 28.468511] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 28.468527] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 28.468544] [drm:intel_dump_pipe_config [i915]] requested mode: [ 28.468547] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 28.468563] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 28.468566] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 28.468583] [drm:intel_dump_pipe_config [i915]] crtc timings: 138700 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0x9 [ 28.468599] [drm:intel_dump_pipe_config [i915]] port clock: 270000 [ 28.468615] [drm:intel_dump_pipe_config [i915]] pipe src size: 1920x1080 [ 28.468632] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 28.468648] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 28.468664] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 28.468679] [drm:intel_dump_pipe_config [i915]] ips: 0 [ 28.468694] [drm:intel_dump_pipe_config [i915]] double wide: 0 [ 28.468710] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 28.468725] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 28.468758] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] enabled [ 28.468774] [drm:intel_dump_pipe_config [i915]] FB:46, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 28.468774] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 28.468790] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 28.468806] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 28.468829] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 [ 28.468853] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 28.468874] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 46 [ 28.468893] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 1 -> 0, off 1, on 0, ms 1 [ 28.468916] [drm:intel_find_shared_dpll [i915]] [CRTC:26:pipe A] allocated DPLL 0 [ 28.468936] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A [ 28.468957] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 28.468963] [drm:drm_atomic_get_crtc_state] Added [CRTC:30:pipe B] ffff9de5d055c800 state to ffff9de5d055f000 [ 28.468966] [drm:drm_atomic_get_crtc_state] Added [CRTC:34:pipe C] ffff9de5d055c000 state to ffff9de5d055f000 [ 28.468971] [drm:drm_atomic_commit] commiting ffff9de5d055f000 [ 28.469003] [drm:intel_edp_backlight_off.part.27 [i915]] [ 29.676545] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 29.676628] [drm:intel_disable_pipe [i915]] disabling pipe A [ 29.680879] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 29.680973] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 29.681208] [drm:edp_panel_off [i915]] Turn eDP port A panel power off [ 29.681271] [drm:edp_panel_off [i915]] Wait for panel power off time [ 29.681369] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 29.731682] [drm:wait_panel_status [i915]] Wait complete [ 29.731725] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 29.731757] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 29.731803] [drm:intel_atomic_commit_tail [i915]] [ENCODER:36:DDI A] [ 29.731835] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 0 [ 29.731865] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 1 [ 29.731892] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 2 [ 29.731918] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 3 [ 29.731950] [drm:verify_connector_state [i915]] [CONNECTOR:37:eDP-1] [ 29.731982] [drm:intel_atomic_commit_tail [i915]] [CRTC:26:pipe A] [ 29.732010] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 0 [ 29.732022] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5d055f000 [ 29.732029] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5d055f000 [ 29.734335] PM: suspend of devices complete after 1851.529 msecs [ 29.734768] [drm:intel_power_well_disable [i915]] disabling DDI D power well [ 29.734794] [drm:skl_set_power_well [i915]] Disabling DDI D power well [ 29.734817] [drm:intel_power_well_disable [i915]] disabling DDI C power well [ 29.734840] [drm:skl_set_power_well [i915]] Disabling DDI C power well [ 29.734862] [drm:intel_power_well_disable [i915]] disabling DDI B power well [ 29.734883] [drm:skl_set_power_well [i915]] Disabling DDI B power well [ 29.734905] [drm:intel_power_well_disable [i915]] disabling DDI A/E power well [ 29.734926] [drm:skl_set_power_well [i915]] Disabling DDI A/E power well [ 29.734947] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 29.734973] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 29.734993] [drm:intel_power_well_disable [i915]] disabling DC off [ 29.735015] [drm:skl_enable_dc6 [i915]] Enabling DC6 [ 29.735037] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 [ 29.735484] [drm:intel_power_well_disable [i915]] disabling always-on [ 29.735505] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00 [ 29.735550] [drm:skl_set_cdclk [i915]] Changing CDCLK to 24000 kHz (VCO 0 kHz) [ 29.735695] [drm:intel_update_cdclk [i915]] Current CD clock rate: 24000 kHz, VCO: 0 kHz, ref: 24000 kHz [ 29.735716] [drm:intel_power_well_disable [i915]] disabling MISC IO power well [ 29.735740] [drm:skl_set_power_well [i915]] Disabling MISC IO power well [ 29.735763] [drm:skl_set_power_well [i915]] Clearing auxiliary requests for MISC IO power well forced on by DMC [ 29.735785] [drm:intel_power_well_disable [i915]] disabling power well 1 [ 29.735811] [drm:skl_set_power_well [i915]] Clearing auxiliary requests for power well 1 forced on by DMC [ 29.747467] PM: late suspend of devices complete after 13.128 msecs [ 29.747833] ACPI : EC: interrupt blocked [ 29.748730] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 29.761177] PM: noirq suspend of devices complete after 13.708 msecs [ 29.761747] ACPI: Preparing to enter system sleep state S3 [ 29.763382] ACPI : EC: EC stopped [ 29.763383] PM: Saving platform NVS memory [ 29.763392] Disabling non-boot CPUs ... [ 29.764812] smpboot: CPU 1 is now offline [ 29.772472] smpboot: CPU 2 is now offline [ 29.789396] smpboot: CPU 3 is now offline [ 29.801919] smpboot: CPU 4 is now offline [ 29.813264] smpboot: CPU 5 is now offline [ 29.825194] smpboot: CPU 6 is now offline [ 29.837115] smpboot: CPU 7 is now offline [ 29.847455] ACPI: Low-level resume complete [ 29.847533] ACPI : EC: EC started [ 29.847534] PM: Restoring platform NVS memory [ 29.848231] Suspended for 3.270 seconds [ 29.849203] Enabling non-boot CPUs ... [ 29.851772] x86: Booting SMP configuration: [ 29.851772] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 29.855092] cache: parent cpu1 should not be sleeping [ 29.855306] CPU1 is up [ 29.858804] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 29.862219] cache: parent cpu2 should not be sleeping [ 29.862443] CPU2 is up [ 29.867824] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 29.871256] cache: parent cpu3 should not be sleeping [ 29.871471] CPU3 is up [ 29.883830] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 29.886485] cache: parent cpu4 should not be sleeping [ 29.886715] CPU4 is up [ 29.892858] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 29.895311] cache: parent cpu5 should not be sleeping [ 29.895555] CPU5 is up [ 29.901884] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 29.904459] cache: parent cpu6 should not be sleeping [ 29.904715] CPU6 is up [ 29.910904] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 29.913479] cache: parent cpu7 should not be sleeping [ 29.913740] CPU7 is up [ 29.919936] ACPI: Waking up from system sleep state S3 [ 29.924753] ACPI : EC: interrupt unblocked [ 29.937207] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 29.937482] PM: noirq resume of devices complete after 12.819 msecs [ 29.937809] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 29.937821] [drm:intel_power_well_enable [i915]] enabling power well 1 [ 29.937833] [drm:intel_power_well_enable [i915]] enabling MISC IO power well [ 29.937849] [drm:skl_init_cdclk [i915]] Sanitizing cdclk programmed by pre-os [ 29.937864] [drm:skl_set_cdclk [i915]] Changing CDCLK to 337500 kHz (VCO 8100000 kHz) [ 29.939624] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 29.940001] [drm:intel_power_well_enable [i915]] enabling always-on [ 29.940011] [drm:intel_power_well_enable [i915]] enabling DC off [ 29.940020] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 29.940032] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 29.940042] [drm:intel_power_well_enable [i915]] enabling DDI A/E power well [ 29.940051] [drm:skl_set_power_well [i915]] Enabling DDI A/E power well [ 29.940060] [drm:intel_power_well_enable [i915]] enabling DDI B power well [ 29.940069] [drm:skl_set_power_well [i915]] Enabling DDI B power well [ 29.940078] [drm:intel_power_well_enable [i915]] enabling DDI C power well [ 29.940087] [drm:skl_set_power_well [i915]] Enabling DDI C power well [ 29.940096] [drm:intel_power_well_enable [i915]] enabling DDI D power well [ 29.940105] [drm:skl_set_power_well [i915]] Enabling DDI D power well [ 29.940114] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 29.940135] PM: early resume of devices complete after 2.575 msecs [ 29.940177] ACPI : EC: event unblocked [ 29.940231] ACPI : button: The lid device is not compliant to SW_LID. [ 29.940450] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x5fb95018 [ 29.940456] sd 0:0:0:0: [sda] Starting disk [ 29.940470] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 29.940471] sd 1:0:0:0: [sdb] Starting disk [ 29.940472] sd 3:0:0:0: [sdd] Starting disk [ 29.940473] sd 2:0:0:0: [sdc] Starting disk [ 29.940487] [drm:intel_opregion_setup [i915]] SWSCI supported [ 29.940522] rtc_cmos 00:02: System wakeup disabled by ACPI [ 29.946175] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 29.946186] [drm:intel_opregion_setup [i915]] ASLE supported [ 29.946196] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 29.946207] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 29.946266] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af04 [ 29.946647] [drm:gen8_init_common_ring [i915]] Execlists enabled for render ring [ 29.946715] [drm:gen8_init_common_ring [i915]] Execlists enabled for blitter ring [ 29.946768] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd ring [ 29.946817] [drm:gen8_init_common_ring [i915]] Execlists enabled for video enhancement ring [ 29.946865] [drm:intel_guc_setup [i915]] GuC fw status: path i915/skl_guc_ver6_1.bin, fetch NONE, load NONE [ 29.946871] [drm] GuC firmware load skipped [ 29.946886] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 29.946957] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:26:pipe A] hw state readout: disabled [ 29.946970] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:30:pipe B] hw state readout: disabled [ 29.946983] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:34:pipe C] hw state readout: disabled [ 29.946995] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1 [ 29.947007] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 29.947018] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 29.947028] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0 [ 29.947040] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:36:DDI A] hw state readout: disabled, pipe A [ 29.947055] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:37:eDP-1] hw state readout: disabled [ 29.947076] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][setup_hw_state] config ffff9de5d055f800 for pipe A [ 29.947088] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A [ 29.947099] [drm:intel_dump_pipe_config [i915]] pipe bpp: 0, dithering: 0 [ 29.947110] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 29.947121] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 29.947132] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 29.947142] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 29.947151] [drm:intel_dump_pipe_config [i915]] requested mode: [ 29.947155] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 29.947164] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 29.947166] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 29.947176] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 29.947186] [drm:intel_dump_pipe_config [i915]] port clock: 0 [ 29.947195] [drm:intel_dump_pipe_config [i915]] pipe src size: 0x0 [ 29.947205] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 29.947215] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 29.947224] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 29.947234] [drm:intel_dump_pipe_config [i915]] ips: 0 [ 29.947243] [drm:intel_dump_pipe_config [i915]] double wide: 0 [ 29.947253] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 29.947262] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 29.947282] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] enabled [ 29.947292] [drm:intel_dump_pipe_config [i915]] FB:46, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 29.947292] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 29.947301] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 29.947310] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 29.947321] [drm:intel_dump_pipe_config [i915]] [CRTC:30:pipe B][setup_hw_state] config ffff9de5d055c800 for pipe B [ 29.947330] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B [ 29.947339] [drm:intel_dump_pipe_config [i915]] pipe bpp: 0, dithering: 0 [ 29.947348] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 29.947358] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 29.947367] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 29.947376] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 29.947385] [drm:intel_dump_pipe_config [i915]] requested mode: [ 29.947387] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 29.947396] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 29.947397] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 29.947407] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 29.947416] [drm:intel_dump_pipe_config [i915]] port clock: 0 [ 29.947425] [drm:intel_dump_pipe_config [i915]] pipe src size: 0x0 [ 29.947434] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 29.947443] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 29.947452] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 29.947461] [drm:intel_dump_pipe_config [i915]] ips: 0 [ 29.947470] [drm:intel_dump_pipe_config [i915]] double wide: 0 [ 29.947479] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 29.947488] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 29.947497] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1B] disabled, scaler_id = -1 [ 29.947506] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor B] disabled, scaler_id = -1 [ 29.947515] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 2B] disabled, scaler_id = -1 [ 29.947525] [drm:intel_dump_pipe_config [i915]] [CRTC:34:pipe C][setup_hw_state] config ffff9de5d055c000 for pipe C [ 29.947534] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C [ 29.947543] [drm:intel_dump_pipe_config [i915]] pipe bpp: 0, dithering: 0 [ 29.947552] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 29.947561] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 29.947570] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 29.947579] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 29.947588] [drm:intel_dump_pipe_config [i915]] requested mode: [ 29.947589] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 29.947598] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 29.947599] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 29.947609] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 29.947618] [drm:intel_dump_pipe_config [i915]] port clock: 0 [ 29.947627] [drm:intel_dump_pipe_config [i915]] pipe src size: 0x0 [ 29.947636] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 29.947645] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 29.947658] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 29.947669] [drm:intel_dump_pipe_config [i915]] ips: 0 [ 29.947677] [drm:intel_dump_pipe_config [i915]] double wide: 0 [ 29.947686] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 29.947695] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 29.947704] [drm:intel_dump_pipe_config [i915]] [PLANE:32:plane 1C] disabled, scaler_id = -1 [ 29.947713] [drm:intel_dump_pipe_config [i915]] [PLANE:33:cursor C] disabled, scaler_id = -1 [ 29.947722] [drm:intel_dump_pipe_config [i915]] [PLANE:35:plane 2C] disabled, scaler_id = -1 [ 29.947734] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 enabled but not in use, disabling [ 29.947765] [drm:intel_power_well_disable [i915]] disabling DDI D power well [ 29.947775] [drm:skl_set_power_well [i915]] Disabling DDI D power well [ 29.947785] [drm:intel_power_well_disable [i915]] disabling DDI C power well [ 29.947795] [drm:skl_set_power_well [i915]] Disabling DDI C power well [ 29.947805] [drm:intel_power_well_disable [i915]] disabling DDI B power well [ 29.947815] [drm:skl_set_power_well [i915]] Disabling DDI B power well [ 29.947825] [drm:intel_power_well_disable [i915]] disabling DDI A/E power well [ 29.947834] [drm:skl_set_power_well [i915]] Disabling DDI A/E power well [ 29.947838] [drm:drm_atomic_check_only] checking ffff9de5d055d000 [ 29.947841] [drm:drm_atomic_helper_check_modeset] [CRTC:26:pipe A] mode changed [ 29.947842] [drm:drm_atomic_helper_check_modeset] [CRTC:26:pipe A] enable changed [ 29.947844] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:eDP-1] [ 29.947846] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:DDI A], now on [CRTC:26:pipe A] [ 29.947847] [drm:drm_atomic_helper_check_modeset] [CRTC:26:pipe A] active changed [ 29.947848] [drm:drm_atomic_helper_check_modeset] [CRTC:26:pipe A] needs all connectors, enable: y, active: y [ 29.947850] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5d055d000 [ 29.947852] [drm:drm_atomic_helper_check_modeset] [CRTC:30:pipe B] needs all connectors, enable: n, active: n [ 29.947853] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:pipe B] to ffff9de5d055d000 [ 29.947855] [drm:drm_atomic_helper_check_modeset] [CRTC:34:pipe C] needs all connectors, enable: n, active: n [ 29.947856] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:pipe C] to ffff9de5d055d000 [ 29.947858] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5d055d000 [ 29.947871] [drm:intel_modeset_pipe_config [i915]] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 29.947883] [drm:intel_modeset_pipe_config [i915]] clamping display bpp (was 36) to EDID reported max of 18 [ 29.947897] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 29.947910] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138700KHz [ 29.947923] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18 [ 29.947934] [drm:intel_dp_compute_config [i915]] DP link bw required 249660 available 432000 [ 29.947946] [drm:intel_modeset_pipe_config [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 29.947958] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][modeset] config ffff9de5d055d800 for pipe A [ 29.947968] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP [ 29.947978] [drm:intel_dump_pipe_config [i915]] pipe bpp: 18, dithering: 1 [ 29.947987] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 29.947997] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 2, gmch_m: 4847916, gmch_n: 8388608, link_m: 269328, link_n: 524288, tu: 64 [ 29.948007] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 29.948016] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 29.948025] [drm:intel_dump_pipe_config [i915]] requested mode: [ 29.948027] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 29.948036] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 29.948037] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 29.948047] [drm:intel_dump_pipe_config [i915]] crtc timings: 138700 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0x9 [ 29.948056] [drm:intel_dump_pipe_config [i915]] port clock: 270000 [ 29.948065] [drm:intel_dump_pipe_config [i915]] pipe src size: 1920x1080 [ 29.948075] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 29.948084] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 29.948093] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 29.948102] [drm:intel_dump_pipe_config [i915]] ips: 0 [ 29.948111] [drm:intel_dump_pipe_config [i915]] double wide: 0 [ 29.948120] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 29.948129] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 29.948147] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] enabled [ 29.948157] [drm:intel_dump_pipe_config [i915]] FB:46, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 29.948157] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 29.948166] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 29.948175] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 29.948187] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 [ 29.948202] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 29.948213] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 46 [ 29.948225] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 0 -> 1, off 0, on 1, ms 1 [ 29.948238] [drm:intel_find_shared_dpll [i915]] [CRTC:26:pipe A] allocated DPLL 0 [ 29.948250] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A [ 29.948263] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 29.948274] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:30:pipe B] scaler_user index 1.31 [ 29.948285] [drm:skl_update_scaler [i915]] scaler_user index 1.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 29.948296] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:34:pipe C] scaler_user index 2.31 [ 29.948307] [drm:skl_update_scaler [i915]] scaler_user index 2.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 29.948313] [drm:drm_atomic_commit] commiting ffff9de5d055d000 [ 29.948326] [drm:intel_power_well_enable [i915]] enabling DDI A/E power well [ 29.948336] [drm:skl_set_power_well [i915]] Enabling DDI A/E power well [ 29.948349] [drm:intel_atomic_commit_tail [i915]] [ENCODER:36:DDI A] [ 29.948360] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 0 [ 29.948371] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 1 [ 29.948381] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 2 [ 29.948391] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 3 [ 29.948405] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 29.948417] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 29.948436] [drm:edp_panel_on [i915]] Turn eDP port A panel power on [ 29.948460] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 29.948546] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 29.948564] [drm:wait_panel_status [i915]] Wait complete [ 29.948596] [drm:edp_panel_on [i915]] Wait for panel power on [ 29.948663] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 29.954018] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 29.954032] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 29.954118] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 29.954131] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 30.081843] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 30.149398] [drm:wait_panel_status [i915]] Wait complete [ 30.149424] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 30.149478] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 30.150557] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 30.150567] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 30.150576] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.150588] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 30.151208] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 30.151217] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 30.151240] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.151870] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 30.151879] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 30.151888] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.152495] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 30.152517] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 30.152526] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.153178] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 30.153187] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3 [ 30.154130] [drm:intel_dp_dump_link_status [i915]] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0x33 adj_req2_3:0x0 [ 30.154130] [drm:intel_dp_start_link_train [i915]] Clock recovery check failed, cannot continue channel equalization [ 30.154292] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff9de5d055d800 [ 30.154374] [drm:intel_enable_pipe [i915]] enabling pipe A [ 30.154415] [drm:intel_edp_backlight_on.part.26 [i915]] [ 30.154425] [drm:intel_panel_enable_backlight [i915]] pipe A [ 30.154487] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 416 [ 30.154534] [drm:intel_psr_enable [i915]] PSR disable by flag [ 30.154543] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS [ 30.171187] [drm:verify_connector_state [i915]] [CONNECTOR:37:eDP-1] [ 30.171201] [drm:intel_atomic_commit_tail [i915]] [CRTC:26:pipe A] [ 30.171220] [drm:verify_single_dpll_state.isra.77 [i915]] DPLL 0 [ 30.171232] [drm:intel_atomic_commit_tail [i915]] [CRTC:30:pipe B] [ 30.171243] [drm:intel_atomic_commit_tail [i915]] [CRTC:34:pipe C] [ 30.171249] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5d055d000 [ 30.171253] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5d055d000 [ 30.171325] [drm:intel_dp_detect [i915]] [CONNECTOR:37:eDP-1] [ 30.171336] [drm:intel_dp_long_pulse [i915]] Display Port TPS3 support: source yes, sink yes [ 30.171347] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 30.171356] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 30.171365] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 30.171698] [drm:intel_dp_long_pulse [i915]] Sink OUI: 0022b9 [ 30.172027] [drm:intel_dp_long_pulse [i915]] Branch OUI: 000000 [ 30.172379] [drm:intel_dp_check_link_status [i915]] DDI A: channel EQ not ok, retraining [ 30.173311] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 30.173320] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 30.173343] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.173353] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 30.173997] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 30.174006] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 30.174015] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.174627] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 30.174635] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 30.174644] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.175271] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 30.175280] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 30.175288] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.175895] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 30.175904] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3 [ 30.176841] [drm:intel_dp_dump_link_status [i915]] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0x33 adj_req2_3:0x0 [ 30.176842] [drm:intel_dp_start_link_train [i915]] Clock recovery check failed, cannot continue channel equalization [ 30.177007] [drm:drm_helper_hpd_irq_event] [CONNECTOR:37:eDP-1] status updated from connected to connected [ 30.177023] [drm:intel_dp_detect [i915]] [CONNECTOR:37:eDP-1] [ 30.177035] [drm:intel_dp_long_pulse [i915]] Display Port TPS3 support: source yes, sink yes [ 30.177045] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 30.177068] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 30.177078] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 30.177413] [drm:intel_dp_long_pulse [i915]] Sink OUI: 0022b9 [ 30.177760] [drm:intel_dp_long_pulse [i915]] Branch OUI: 000000 [ 30.178111] [drm:intel_dp_check_link_status [i915]] DDI A: channel EQ not ok, retraining [ 30.179045] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 30.179068] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 30.179078] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.179087] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 30.179709] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 30.179718] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 30.179727] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.180357] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 30.180365] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 30.180388] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.181023] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 30.181032] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 30.181041] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 30.181650] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 30.181661] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3 [ 30.182590] [drm:intel_dp_dump_link_status [i915]] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0x33 adj_req2_3:0x0 [ 30.182590] [drm:intel_dp_start_link_train [i915]] Clock recovery check failed, cannot continue channel equalization [ 30.182743] [drm:drm_helper_hpd_irq_event] [CONNECTOR:37:eDP-1] status updated from connected to connected [ 30.183386] [drm:intel_opregion_register [i915]] More than 15 outputs detected via ACPI [ 30.183772] [drm:drm_atomic_state_init] Allocated atomic state ffff9de5ec44d000 [ 30.183775] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:pipe A] ffff9de5ec44d800 state to ffff9de5ec44d000 [ 30.183777] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane 1A] ffff9de5ee115cc0 state to ffff9de5ec44d000 [ 30.183779] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff9de5ec44d800 [ 30.183780] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115cc0 to [CRTC:26:pipe A] [ 30.183782] [drm:drm_atomic_set_fb_for_plane] Set [FB:46] for plane state ffff9de5ee115cc0 [ 30.183783] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:pipe A] to ffff9de5ec44d000 [ 30.183785] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] ffff9de5daad41a0 state to ffff9de5ec44d000 [ 30.183786] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5daad41a0 to [NOCRTC] [ 30.183787] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9de5daad41a0 to [CRTC:26:pipe A] [ 30.183789] [drm:drm_atomic_get_crtc_state] Added [CRTC:30:pipe B] ffff9de5ec44b000 state to ffff9de5ec44d000 [ 30.183791] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane 1B] ffff9de5ee115180 state to ffff9de5ec44d000 [ 30.183792] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5ec44b000 [ 30.183793] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115180 to [NOCRTC] [ 30.183794] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115180 [ 30.183795] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:pipe B] to ffff9de5ec44d000 [ 30.183798] [drm:drm_atomic_get_crtc_state] Added [CRTC:34:pipe C] ffff9de5ec44e800 state to ffff9de5ec44d000 [ 30.183800] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane 1C] ffff9de5ee115840 state to ffff9de5ec44d000 [ 30.183801] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9de5ec44e800 [ 30.183802] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9de5ee115840 to [NOCRTC] [ 30.183803] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9de5ee115840 [ 30.183804] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:pipe C] to ffff9de5ec44d000 [ 30.183807] [drm:drm_atomic_check_only] checking ffff9de5ec44d000 [ 30.183815] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:eDP-1] [ 30.183817] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:DDI A], now on [CRTC:26:pipe A] [ 30.183830] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 30.183841] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:26:pipe A] has [PLANE:23:plane 1A] with fb 46 [ 30.183851] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:23:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 30.183856] [drm:drm_atomic_commit] commiting ffff9de5ec44d000 [ 30.187734] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9de5ec44d000 [ 30.187737] [drm:drm_atomic_state_free] Freeing atomic state ffff9de5ec44d000 [ 30.252980] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 30.253203] ata1.00: supports DRM functions and may not be fully accessible [ 30.253244] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 30.253282] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 30.253645] ata3.00: configured for UDMA/133 [ 30.253929] ata1.00: disabling queued TRIM support [ 30.254308] ata1.00: supports DRM functions and may not be fully accessible [ 30.254826] ata1.00: disabling queued TRIM support [ 30.254984] ata1.00: configured for UDMA/133 [ 30.258014] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 30.258027] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long [ 30.258038] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0 [ 30.258055] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A [ 30.262343] ata2.00: configured for UDMA/133 [ 30.262347] ahci 0000:00:17.0: port does not support device sleep [ 30.265074] ahci 0000:00:17.0: port does not support device sleep [ 30.359901] usb 1-8: reset full-speed USB device number 4 using xhci_hcd [ 30.521736] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 30.522578] ata4.00: configured for UDMA/133 [ 30.587917] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [ 30.756973] PM: resume of devices complete after 816.836 msecs [ 30.780771] usb 1-8:1.0: rebind failed: -517 [ 30.780786] usb 1-8:1.1: rebind failed: -517 [ 30.780938] PM: Finishing wakeup. [ 30.780938] Restarting tasks ... done. [ 30.781717] thermal thermal_zone2: failed to read out thermal zone (-5) [ 30.782019] bbswitch: disabling discrete graphics [ 30.782022] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95) [ 30.814495] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready [ 30.838839] r8169 0000:02:00.1 enp2s0f1: link down [ 30.838890] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready [ 30.839515] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 30.840716] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 30.841370] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 30.985356] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 30.985640] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 31.041339] psmouse serio2: synaptics: queried max coordinates: x [..5654], y [..4716] [ 31.075837] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 31.134795] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 31.135426] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 31.159812] psmouse serio2: synaptics: queried min coordinates: x [1326..], y [1228..] [ 31.280035] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 31.280299] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 31.392596] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 31.410534] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 31.417407] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 31.422437] Bluetooth: hci0: Device revision is 5 [ 31.422438] Bluetooth: hci0: Secure boot is enabled [ 31.422439] Bluetooth: hci0: OTP lock is enabled [ 31.422439] Bluetooth: hci0: API lock is enabled [ 31.422453] Bluetooth: hci0: Debug lock is disabled [ 31.422454] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 31.430626] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 31.727916] [drm] RC6 on [ 31.728061] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 31.728086] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 32.239729] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 32.239783] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 32.239793] [drm:intel_power_well_disable [i915]] disabling DC off [ 32.239805] [drm:skl_enable_dc6 [i915]] Enabling DC6 [ 32.239815] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 [ 32.931084] Bluetooth: hci0: Waiting for firmware download to complete [ 32.931354] Bluetooth: hci0: Firmware loaded in 1479010 usecs [ 32.931374] Bluetooth: hci0: Waiting for device to boot [ 32.942418] Bluetooth: hci0: Device booted in 10792 usecs [ 32.942491] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 32.943436] Bluetooth: hci0: Failed to send Intel_Write_DDC (-22) [ 34.605722] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 34.606338] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 34.751353] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 34.751616] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 34.848124] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 37.956571] wlp3s0: authenticate with 44:32:c8:a3:74:27 [ 37.963035] wlp3s0: send auth to 44:32:c8:a3:74:27 (try 1/3) [ 37.978481] wlp3s0: authenticated [ 37.978652] wlp3s0: associate with 44:32:c8:a3:74:27 (try 1/3) [ 37.982688] wlp3s0: RX AssocResp from 44:32:c8:a3:74:27 (capab=0x411 status=0 aid=4) [ 37.994806] wlp3s0: associated [ 37.994833] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready