BIOS EBDA/lowmem at: 00099800/00099800 Linux version 2.6.28-gentoo-noswap (root@tablet) (gcc version 4.3.2 (Gentoo 4.3.2-r2 p1.5, pie-10.1.4) ) #4 SMP PREEMPT Sun Jan 18 14:49:23 MSK 2009 Command line: root=/dev/sda2 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000099800 (usable) BIOS-e820: 0000000000099800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable) BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data) BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS) BIOS-e820: 000000007d700000 - 000000007e000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x7d6b0 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000007d6b0000 0000000000 - 007d600000 page 2M 007d600000 - 007d6b0000 page 4k kernel direct mapping tables up to 7d6b0000 @ 8000-c000 last_map_addr: 7d6b0000 end: 7d6b0000 ACPI: RSDP 000F6950, 0024 (r2 LENOVO) ACPI: XSDT 7D6BCD52, 0094 (r1 LENOVO TP-7S 1210 LTP 0) ACPI: FACP 7D6BCE00, 00F4 (r3 LENOVO TP-7S 1210 LNVO 1) ACPI Warning (tbfadt-0460): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080926] ACPI: DSDT 7D6BD1DB, E940 (r1 LENOVO TP-7S 1210 MSFT 3000000) ACPI: FACS 7D6E4000, 0040 ACPI: SSDT 7D6BCFB4, 0227 (r1 LENOVO TP-7S 1210 MSFT 3000000) ACPI: ECDT 7D6CBB1B, 0052 (r1 LENOVO TP-7S 1210 LNVO 1) ACPI: TCPA 7D6CBB6D, 0032 (r2 LENOVO TP-7S 1210 LNVO 1) ACPI: APIC 7D6CBB9F, 0068 (r1 LENOVO TP-7S 1210 LNVO 1) ACPI: MCFG 7D6CBC07, 003C (r1 LENOVO TP-7S 1210 LNVO 1) ACPI: HPET 7D6CBC43, 0038 (r1 LENOVO TP-7S 1210 LNVO 1) ACPI: SLIC 7D6CBDF0, 0176 (r1 LENOVO TP-7S 1210 LTP 0) ACPI: BOOT 7D6CBF66, 0028 (r1 LENOVO TP-7S 1210 LTP 1) ACPI: ASF! 7D6CBF8E, 0072 (r16 LENOVO TP-7S 1210 PTL 1) ACPI: SSDT 7D6E2697, 025F (r1 LENOVO TP-7S 1210 INTL 20050513) ACPI: SSDT 7D6E28F6, 00A6 (r1 LENOVO TP-7S 1210 INTL 20050513) ACPI: SSDT 7D6E299C, 04F7 (r1 LENOVO TP-7S 1210 INTL 20050513) ACPI: SSDT 7D6E2E93, 01D8 (r1 LENOVO TP-7S 1210 INTL 20050513) ACPI: DMI detected: Lenovo ThinkPad X61 ACPI: Added _OSI(Linux) ACPI: Local APIC address 0xfee00000 (5 early reservations) ==> bootmem [0000000000 - 007d6b0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000073fc70] TEXT DATA BSS ==> [0000200000 - 000073fc70] #3 [0000099800 - 0000100000] BIOS reserved ==> [0000099800 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000f6980] 000f6980 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x00000099 0: 0x00000100 -> 0x0007d6b0 On node 0 totalpages: 513609 DMA zone: 56 pages used for memmap DMA zone: 1452 pages reserved DMA zone: 2485 pages, LIFO batch:0 DMA32 zone: 6968 pages used for memmap DMA32 zone: 502648 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000) PERCPU: Allocating 49152 bytes of per cpu data NR_CPUS: 4, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 505133 Kernel command line: root=/dev/sda2 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1596.158 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 2016320k/2054848k available (3118k kernel code, 412k absent, 37496k reserved, 1440k data, 332k init) SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.32 BogoMIPS (lpj=5320526) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080926 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping 0b Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3193.00 BogoMIPS (lpj=5320010) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: Measured 261256 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (6386.33 BogoMIPS). net_namespace: 912 bytes NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query honored via DMI ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe225000-0xfe225fff] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe220000-0xfe223fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x18e0-0x18ef] pci 0000:00:1f.2: reg 10 io port: [0x1c30-0x1c37] pci 0000:00:1f.2: reg 14 io port: [0x1c24-0x1c27] pci 0000:00:1f.2: reg 18 io port: [0x1c28-0x1c2f] pci 0000:00:1f.2: reg 1c io port: [0x1c20-0x1c23] pci 0000:00:1f.2: reg 20 io port: [0x1c00-0x1c1f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff] pci 0000:00:1f.3: reg 20 io port: [0x1c40-0x1c5f] pci 0000:02:00.0: reg 10 32bit mmio: [0xdfcffc00-0xdfcfffff] pci 0000:02:00.0: reg 18 io port: [0x2000-0x207f] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xdc100000-0xdfcfffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xfdf00000-0xfdf01fff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xfc000000-0xfdffffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] pci 0000:05:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] pci 0000:05:00.0: supports D1 D2 pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff] pci 0000:05:00.1: supports D1 D2 pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.1: PME# disabled pci 0000:05:00.2: reg 10 32bit mmio: [0xf8301800-0xf83018ff] pci 0000:05:00.2: supports D1 D2 pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.2: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x4000-0x7fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) ACPI: WMI: Mapper loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb dca service started, version 1.4 PCI: Using ACPI for IRQ routing cfg80211: Calling CRDA to update world regulatory domain cfg80211: Failed calling CRDA cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff has been reserved system 00:00: iomem range 0xc4000-0xc7fff has been reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0xd0000-0xd3fff has been reserved system 00:00: iomem range 0xd4000-0xd7fff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7dffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved system 00:02: ioport range 0x164e-0x164f has been reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x165f could not be reserved system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xdc100000-0xdfcfffff pci 0000:00:1c.0: PREFETCH window: 0x000000dfe00000-0x000000dfefffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xfc000000-0xfdffffff pci 0000:00:1c.1: PREFETCH window: 0x000000f8000000-0x000000f80fffff pci 0000:05:00.0: CardBus bridge, secondary bus 0000:06 pci 0000:05:00.0: IO window: 0x004000-0x0040ff pci 0000:05:00.0: IO window: 0x004400-0x0044ff pci 0000:05:00.0: PREFETCH window: 0xf4000000-0xf7ffffff pci 0000:05:00.0: MEM window: 0x80000000-0x83ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1e.0: IO window: 0x4000-0x7fff pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] bus: 02 index 0 io port: [0x2000-0x2fff] bus: 02 index 1 mmio: [0xdc100000-0xdfcfffff] bus: 02 index 2 mmio: [0xdfe00000-0xdfefffff] bus: 02 index 3 mmio: [0x0-0x0] bus: 03 index 0 io port: [0x3000-0x3fff] bus: 03 index 1 mmio: [0xfc000000-0xfdffffff] bus: 03 index 2 mmio: [0xf8000000-0xf80fffff] bus: 03 index 3 mmio: [0x0-0x0] bus: 05 index 0 io port: [0x4000-0x7fff] bus: 05 index 1 mmio: [0xf8300000-0xfbffffff] bus: 05 index 2 mmio: [0xf4000000-0xf7ffffff] bus: 05 index 3 io port: [0x00-0xffff] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff] bus: 06 index 0 io port: [0x4000-0x40ff] bus: 06 index 1 io port: [0x4400-0x44ff] bus: 06 index 2 mmio: [0xf4000000-0xf7ffffff] bus: 06 index 3 mmio: [0x80000000-0x83ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x35 set to 0x1 msgmni has been set to 3939 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 383 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pcieport-driver 0000:00:1c.1: irq 382 for MSI/MSI-X pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 tpm_tis 00:0b: 1.2 TPM (device-id 0x3203, rev-id 9) ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: SSDT 7D6E1D72, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513) ACPI: SSDT 7D6E2079, 061E (r1 PmRef Cpu0Cst 100 INTL 20050513) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7D6E1CAA, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) ACPI: SSDT 7D6E1FF4, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (56 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (55 C) [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: power state changed by ACPI to D0 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:02.0: irq 381 for MSI/MSI-X [drm] Initialized i915 1.6.0 20080730 on minor 0 brd: module loaded loop: module loaded e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 380 for MSI/MSI-X 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:72:8c:4e:ff 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks iwlagn: Copyright(c) 2003-2008 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:03:00.0: PCI INT A disabled phy0: Selected rate control algorithm 'iwl-agn-rs' Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: irq 379 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 379 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 379 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: HITACHI HTS542516K9SA00, BBCZC3HP, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/133 ata1.00: configured for UDMA/133 ata1: EH complete ata3: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54251 BBCZ PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 ata5: port disabled. ignoring. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.28-gentoo-noswap ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.28-gentoo-noswap ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input3 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 hdaps: inverting axis readings. hdaps: LENOVO ThinkPad X61 detected. input: hdaps as /devices/platform/hdaps/input/input5 hdaps: driver successfully loaded. cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 rtc_cmos 00:07: setting system clock to 2009-01-21 18:47:33 UTC (1232563653) Clocksource tsc unstable (delta = -87250396 ns) IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 332k freed sd 0:0:0:0: Attached scsi generic sg0 type 0 acpi device:03: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input7 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Non-volatile memory driver v1.2 yenta_cardbus 0000:05:00.0: CardBus bridge found [17aa:20c6] thinkpad_acpi: ThinkPad ACPI Extras v0.21 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7SET35WW (1.21 ), EC 7RHT16WW-1.02 thinkpad_acpi: Lenovo ThinkPad X61 Tablet, model 7762WHW thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. input: ThinkPad Extra Buttons as /devices/virtual/input/input8 yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 yenta_cardbus 0000:05:00.0: Socket status: 30000006 yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac HDA Intel 0000:00:1b.0: setting latency timer to 64 EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: sda5: found reiserfs format "3.6" with standard journal ReiserFS: sda5: using ordered data mode ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda5: checking transaction log (sda5) ReiserFS: sda5: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on sda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x012ba000 iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106) iwlagn 0000:03:00.0: irq 378 for MSI/MSI-X iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX wlan0: direct probe to AP 00:18:f3:60:0c:fd try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:18:f3:60:0c:fd wlan0: authenticated wlan0: associate with AP 00:18:f3:60:0c:fd wlan0: RX AssocResp from 00:18:f3:60:0c:fd (capab=0x411 status=0 aid=2) wlan0: associated mtrr: no MTRR for e0000000,10000000 found mtrr: no MTRR for e0000000,10000000 found