X.Org X Server 1.6.0 Release Date: 2009-2-25 X Protocol Version 11, Revision 0 Build Operating System: Linux_2.6.22.18-server-1mdv Mandriva Current Operating System: Linux talvin10.UGent.be 2.6.29-desktop-0.rc8.3.1mnb #1 SMP Wed Mar 18 12:21:15 EDT 2009 x86_64 Build Date: 24 March 2009 04:12:16PM Before reporting problems, check http://qa.mandriva.com to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 25 16:44:46 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (**) |-->Input Device "Keyboard1" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Mouse2" (**) Option "AllowMouseOpenFail" (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules" (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Keyboard1 (WW) Disabling Mouse1 (II) Loader magic: 0xbc0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation 82Q35 Express Integrated Graphics Controller rev 2, Mem @ 0xfea00000/524288, 0xd0000000/268435456, 0xfeb00000/1048576, I/O @ 0x0000ec90/8 (--) PCI: (0@0:2:1) Intel Corporation 82Q35 Express Integrated Graphics Controller rev 2, Mem @ 0xfea80000/524288 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded by default. (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "v4l" (II) Loading /usr/lib64/xorg/modules/drivers//v4l_drv.so (II) Module v4l: vendor="X.Org Foundation" compiled for 1.5.99.3, module version = 0.1.1 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension Multi-Buffering (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (WW) Warning, couldn't open module type1 (II) UnloadModule: "type1" (EE) Failed to load module "type1" (module does not exist, 0) (II) LoadModule: "freetype" (WW) Warning, couldn't open module freetype (II) UnloadModule: "freetype" (EE) Failed to load module "freetype" (module does not exist, 0) (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib64/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.6.99 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.2.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) v4l driver for Video4Linux (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for v4l (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib64/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Creating default Display subsection in Screen section "screen1" for depth/fbbpp 24/32 (**) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) Q35 (--) intel(0): Chipset: "Q35" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFEA00000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section monitor1 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): Output TMDS-1 has no monitor section (II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: TMDS0 output reported (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): Resizable framebuffer: not available (1 3) (II) intel(0): I2C device "SDVOB DDC Bus:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0. (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "DEL", prod id 16403 (II) intel(0): Output VGA disconnected (II) intel(0): Output TMDS-1 connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output TMDS-1 using initial mode 1280x1024 (II) intel(0): detected 1024 kB GTT. (II) intel(0): detected 7164 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib64/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): Comparing regs from server start up to After PreInit (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 1167360 total, 1 used (II) intel(0): I830CheckAvailableMemory: 4669436 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xfea00000 (II) intel(0): [dri] visual configs initialized (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 31457280 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0e200000 (pgoffset 57856) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x006ff000: end of stolen memory (II) intel(0): 0x006ff000-0x0e1fffff: DRI memory manager (224260 kB) (II) intel(0): 0x0e200000-0x0fffffff: exa offscreen (30720 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x006ff000: start of memory manager (II) intel(0): 0x01000000-0x01ffffff: depth buffer (16384 kB) X tiled (II) intel(0): 0x02000000-0x02ffffff: back buffer (16384 kB) X tiled (II) intel(0): 0x03000000-0x03ffffff: front buffer (16384 kB) X tiled (II) intel(0): 0x00800000-0x00800fff: overlay registers (4 kB) (II) intel(0): 0x00900000-0x00909fff: HW cursors (40 kB) (II) intel(0): 0x0e200000: end of memory manager (WW) intel(0): ESR is 0x00000001, instruction error (WW) intel(0): Existing errors found in hardware state. (II) intel(0): [drm] mapped front buffer at 0xd3000000, handle = 0xd3000000 (II) intel(0): [drm] mapped back buffer at 0xd2000000, handle = 0xd2000000 (II) intel(0): [drm] mapped depth buffer at 0xd1000000, handle = 0xd1000000 (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is off (II) intel(0): Display plane B is now disabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output TMDS-1 is connected to pipe A (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (**) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: XF86DRI Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: drmOpenMinor returns 12 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /usr/lib64/dri/i915_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 270 (**) Option "SendCoreEvents" (**) Mouse2: always reports core events (**) Mouse2: Device: "/dev/input/by-id/usb-413c_Dell_Premium_USB_Optical_Mouse-event-mouse" (II) Mouse2: Found 7 mouse buttons (II) Mouse2: Found x and y relative axes (II) Mouse2: Found scroll wheel(s) (II) Mouse2: Configuring as mouse (**) Mouse2: YAxisMapping: buttons 4 and 5 (**) Mouse2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Mouse2" (type: MOUSE) (**) Mouse2: (accel) keeping acceleration scheme 1 (**) Mouse2: (accel) filter chain progression: 2.00 (**) Mouse2: (accel) filter stage 0: 20.00 ms (**) Mouse2: (accel) set acceleration profile 0 (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) config/hal: Adding input device Dell Premium USB Optical Mouse (**) Dell Premium USB Optical Mouse: always reports core events (**) Dell Premium USB Optical Mouse: Device: "/dev/input/event1" (WW) Dell Premium USB Optical Mouse: device file already in use. Ignoring. (II) UnloadModule: "evdev" (EE) PreInit returned NULL for "Dell Premium USB Optical Mouse" (EE) config/hal: NewInputDeviceRequest failed (8) (II) config/hal: Adding input device Dell Dell USB Keyboard (**) Dell Dell USB Keyboard: always reports core events (**) Dell Dell USB Keyboard: Device: "/dev/input/event2" (II) Dell Dell USB Keyboard: Found keys (II) Dell Dell USB Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device Power Button (FF) (**) Power Button (FF): always reports core events (**) Power Button (FF): Device: "/dev/input/event3" (II) Power Button (FF): Found keys (II) Power Button (FF): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device Power Button (CM) (**) Power Button (CM): always reports core events (**) Power Button (CM): Device: "/dev/input/event4" (II) Power Button (CM): Found keys (II) Power Button (CM): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "compose:rwin" (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "DEL", prod id 16403 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): EDID vendor "DEL", prod id 16403 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "DEL", prod id 16403 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): EDID vendor "DEL", prod id 16403 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "DEL", prod id 16403 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): EDID vendor "DEL", prod id 16403 (II) Mouse2: Close (II) UnloadModule: "evdev" (II) Macintosh mouse button emulation: Close (II) UnloadModule: "evdev" (II) Dell Dell USB Keyboard: Close (II) UnloadModule: "evdev" (II) Power Button (FF): Close (II) UnloadModule: "evdev" (II) Power Button (CM): Close (II) UnloadModule: "evdev" (II) intel(0): xf86UnbindGARTMemory: unbind key 0 Backtrace: 0: /etc/X11/X(xorg_backtrace+0x26) [0x4ecc06] 1: /etc/X11/X(xf86SigHandler+0x3e) [0x480bde] 2: /lib64/libc.so.6 [0x7f9b0f189ab0] 3: /usr/lib64/xorg/modules/drivers//intel_drv.so [0x7f9b0d58307c] 4: /usr/lib64/xorg/modules/drivers//intel_drv.so(i830_unbind_all_memory+0x75) [0x7f9b0d583175] 5: /usr/lib64/xorg/modules/drivers//intel_drv.so [0x7f9b0d57b00d] 6: /usr/lib64/xorg/modules/drivers//intel_drv.so [0x7f9b0d57b477] 7: /etc/X11/X [0x501c59] 8: /etc/X11/X [0x5330d3] 9: /etc/X11/X(main+0x44c) [0x42ee9c] 10: /lib64/libc.so.6(__libc_start_main+0xe6) [0x7f9b0f176446] 11: /etc/X11/X [0x42e299] Fatal server error: Caught signal 11. Server aborting Please consult the The X.Org Foundation support at http://qa.mandriva.com for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information.