Linux version 2.6.29-gentoo-r3 (root@tablet) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.1, pie-10.1.5) ) #2 SMP PREEMPT Sat May 9 13:34:35 MSD 2009 Command line: root=/dev/sda2 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000099800 (usable) BIOS-e820: 0000000000099800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable) BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data) BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS) BIOS-e820: 000000007d700000 - 000000007e000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x7d6b0 max_arch_pfn = 0x100000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 2 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 0000000000008000 (usable) modified: 0000000000008000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000008c800 (usable) modified: 0000000000099800 - 00000000000a0000 (reserved) modified: 00000000000d6000 - 00000000000d8000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000007d6b0000 (usable) modified: 000000007d6b0000 - 000000007d6cc000 (ACPI data) modified: 000000007d6cc000 - 000000007d700000 (ACPI NVS) modified: 000000007d700000 - 000000007e000000 (reserved) modified: 00000000f0000000 - 00000000f4000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fed00000 - 00000000fed00400 (reserved) modified: 00000000fed14000 - 00000000fed1a000 (reserved) modified: 00000000fed1c000 - 00000000fed90000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ff000000 - 0000000100000000 (reserved) init_memory_mapping: 0000000000000000-000000007d6b0000 0000000000 - 007d600000 page 2M 007d600000 - 007d6b0000 page 4k kernel direct mapping tables up to 7d6b0000 @ 10000-14000 last_map_addr: 7d6b0000 end: 7d6b0000 ACPI: RSDP 000F6950, 0024 (r2 LENOVO) ACPI: XSDT 7D6BCD52, 0094 (r1 LENOVO TP-7S 1210 LTP 0) ACPI: FACP 7D6BCE00, 00F4 (r3 LENOVO TP-7S 1210 LNVO 1) ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/32 [20081204] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 0/32 [20081204] ACPI Warning (tbfadt-0596): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20081204] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7D6BD1DB, E940 (r1 LENOVO TP-7S 1210 MSFT 3000000) ACPI: FACS 7D6E4000, 0040 ACPI: SSDT 7D6BCFB4, 0227 (r1 LENOVO TP-7S 1210 MSFT 3000000) ACPI: ECDT 7D6CBB1B, 0052 (r1 LENOVO TP-7S 1210 LNVO 1) ACPI: TCPA 7D6CBB6D, 0032 (r2 LENOVO TP-7S 1210 LNVO 1) ACPI: APIC 7D6CBB9F, 0068 (r1 LENOVO TP-7S 1210 LNVO 1) ACPI: MCFG 7D6CBC07, 003C (r1 LENOVO TP-7S 1210 LNVO 1) ACPI: HPET 7D6CBC43, 0038 (r1 LENOVO TP-7S 1210 LNVO 1) ACPI: SLIC 7D6CBDF0, 0176 (r1 LENOVO TP-7S 1210 LTP 0) ACPI: BOOT 7D6CBF66, 0028 (r1 LENOVO TP-7S 1210 LTP 1) ACPI: ASF! 7D6CBF8E, 0072 (r16 LENOVO TP-7S 1210 PTL 1) ACPI: SSDT 7D6E2697, 025F (r1 LENOVO TP-7S 1210 INTL 20050513) ACPI: SSDT 7D6E28F6, 00A6 (r1 LENOVO TP-7S 1210 INTL 20050513) ACPI: SSDT 7D6E299C, 04F7 (r1 LENOVO TP-7S 1210 INTL 20050513) ACPI: SSDT 7D6E2E93, 01D8 (r1 LENOVO TP-7S 1210 INTL 20050513) ACPI: DMI detected: Lenovo ThinkPad X61 ACPI: Added _OSI(Linux) ACPI: Local APIC address 0xfee00000 (5 early reservations) ==> bootmem [0000000000 - 007d6b0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000085b538] TEXT DATA BSS ==> [0000200000 - 000085b538] #3 [0000099800 - 0000100000] BIOS reserved ==> [0000099800 - 0000100000] #4 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x00000008 0: 0x00000010 -> 0x0000008c 0: 0x00000100 -> 0x0007d6b0 On node 0 totalpages: 513583 DMA zone: 56 pages used for memmap DMA zone: 1734 pages reserved DMA zone: 2177 pages, LIFO batch:0 DMA32 zone: 6968 pages used for memmap DMA32 zone: 502648 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000001000 - 0000000000006000 PM: Registered nosave memory: 0000000000008000 - 0000000000010000 PM: Registered nosave memory: 000000000008c000 - 000000000009a000 PM: Registered nosave memory: 000000000009a000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d6000 PM: Registered nosave memory: 00000000000d6000 - 00000000000d8000 PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocating 49152 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504825 Kernel command line: root=/dev/sda2 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1596.024 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 2015080k/2054848k available (3717k kernel code, 516k absent, 38632k reserved, 1840k data, 344k init) SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.05 BogoMIPS (lpj=5320080) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20081204 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping 0b Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3193.06 BogoMIPS (lpj=5320098) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: Measured 261008 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (6386.11 BogoMIPS). net_namespace: 968 bytes NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered dca service started, version 1.8 PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query honored via DMI ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff] pci 0000:00:03.0: reg 10 64bit mmio: [0xfe226800-0xfe22680f] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: reg 10 io port: [0x1828-0x182f] pci 0000:00:03.2: reg 14 io port: [0x180c-0x180f] pci 0000:00:03.2: reg 18 io port: [0x1820-0x1827] pci 0000:00:03.2: reg 1c io port: [0x1808-0x180b] pci 0000:00:03.2: reg 20 io port: [0x1810-0x181f] pci 0000:00:03.3: reg 10 io port: [0x1830-0x1837] pci 0000:00:03.3: reg 14 32bit mmio: [0xfe224000-0xfe224fff] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe225000-0xfe225fff] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe220000-0xfe223fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x18e0-0x18ef] pci 0000:00:1f.2: reg 10 io port: [0x1c30-0x1c37] pci 0000:00:1f.2: reg 14 io port: [0x1c24-0x1c27] pci 0000:00:1f.2: reg 18 io port: [0x1c28-0x1c2f] pci 0000:00:1f.2: reg 1c io port: [0x1c20-0x1c23] pci 0000:00:1f.2: reg 20 io port: [0x1c00-0x1c1f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff] pci 0000:00:1f.3: reg 20 io port: [0x1c40-0x1c5f] pci 0000:02:00.0: reg 10 32bit mmio: [0xdfcffc00-0xdfcfffff] pci 0000:02:00.0: reg 18 io port: [0x2000-0x207f] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xdc100000-0xdfcfffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xfdf00000-0xfdf01fff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xfc000000-0xfdffffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] pci 0000:05:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] pci 0000:05:00.0: supports D1 D2 pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff] pci 0000:05:00.1: supports D1 D2 pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.1: PME# disabled pci 0000:05:00.2: reg 10 32bit mmio: [0xf8301800-0xf83018ff] pci 0000:05:00.2: supports D1 D2 pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.2: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x4000-0x7fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing cfg80211: Calling CRDA to update world regulatory domain cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff has been reserved system 00:00: iomem range 0xc4000-0xc7fff has been reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0xd0000-0xd3fff has been reserved system 00:00: iomem range 0xd4000-0xd7fff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7dffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved system 00:02: ioport range 0x164e-0x164f has been reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x165f could not be reserved system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xdc100000-0xdfcfffff pci 0000:00:1c.0: PREFETCH window: 0x000000dfe00000-0x000000dfefffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xfc000000-0xfdffffff pci 0000:00:1c.1: PREFETCH window: 0x000000f8000000-0x000000f80fffff pci 0000:05:00.0: CardBus bridge, secondary bus 0000:06 pci 0000:05:00.0: IO window: 0x004000-0x0040ff pci 0000:05:00.0: IO window: 0x004400-0x0044ff pci 0000:05:00.0: PREFETCH window: 0xf4000000-0xf7ffffff pci 0000:05:00.0: MEM window: 0x80000000-0x83ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1e.0: IO window: 0x4000-0x7fff pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0xdc100000-0xdfcfffff] pci_bus 0000:02: resource 2 mem: [0xdfe00000-0xdfefffff] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] pci_bus 0000:03: resource 1 mem: [0xfc000000-0xfdffffff] pci_bus 0000:03: resource 2 mem: [0xf8000000-0xf80fffff] pci_bus 0000:03: resource 3 mem: [0x0-0x0] pci_bus 0000:05: resource 0 io: [0x4000-0x7fff] pci_bus 0000:05: resource 1 mem: [0xf8300000-0xfbffffff] pci_bus 0000:05: resource 2 mem: [0xf4000000-0xf7ffffff] pci_bus 0000:05: resource 3 io: [0x00-0xffff] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:06: resource 0 io: [0x4000-0x40ff] pci_bus 0000:06: resource 1 io: [0x4400-0x44ff] pci_bus 0000:06: resource 2 mem: [0xf4000000-0xf7ffffff] pci_bus 0000:06: resource 3 mem: [0x80000000-0x83ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x35 set to 0x1 Scanning for low memory corruption every 60 seconds msgmni has been set to 3936 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X Linux agpgart interface v0.103 ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: SSDT 7D6E1D72, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513) ACPI: SSDT 7D6E2079, 061E (r1 PmRef Cpu0Cst 100 INTL 20050513) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7D6E1CAA, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) ACPI: SSDT 7D6E1FF4, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (51 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (51 C) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial 00:0a: activated 00:0a: ttyS0 at I/O 0x200 (irq = 5) is a NS16550A serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS1 at I/O 0x1830 (irq = 17) is a 16550A brd: module loaded loop: module loaded e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 26 for MSI/MSI-X 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:72:8c:4e:ff 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds iwlagn: Copyright(c) 2003-2008 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:03:00.0: PCI INT A disabled wmaster0 (iwlagn): not using net_device_ops yet phy0: Selected rate control algorithm 'iwl-agn-rs' wlan0 (iwlagn): not using net_device_ops yet Driver 'sd' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: irq 27 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 27 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 27 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: HITACHI HTS542516K9SA00, BBCZC3HP, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/133 ata1.00: configured for UDMA/133 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54251 BBCZ PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sd 0:0:0:0: [sda] Attached SCSI disk ata3: SATA link down (SStatus 0 SControl 300) ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 ata5: port disabled. ignoring. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29-gentoo-r3 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.29-gentoo-r3 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.29-gentoo-r3 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.29-gentoo-r3 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.29-gentoo-r3 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.29-gentoo-r3 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usbcore: registered new interface driver wacom wacom: v1.49:USB Wacom Graphire and Wacom Intuos tablet driver rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 hdaps: inverting axis readings. hdaps: LENOVO ThinkPad X61 detected. input: hdaps as /devices/platform/hdaps/input/input3 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 hdaps: driver successfully loaded. cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.18a. HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA device list: #0: HDA Intel at 0xfe220000 irq 17 TCP cubic registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5 usb 3-1: new full speed USB device using uhci_hcd and address 2 rtc_cmos 00:07: setting system clock to 2009-05-09 13:40:14 UTC (1241876414) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:2. Freeing unused kernel memory: 344k freed usb 3-1: New USB device found, idVendor=0483, idProduct=2016 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Biometric Coprocessor usb 3-1: Manufacturer: STMicroelectronics usb 3-1: configuration #1 chosen from 1 choice usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: New USB device found, idVendor=0a5c, idProduct=2110 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: BCM2045B usb 3-2: Manufacturer: Broadcom Corp usb 3-2: configuration #1 chosen from 1 choice udev: starting version 141 acpi device:03: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input6 sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 Bluetooth: Core ver 2.14 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized firewire_ohci 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 firewire_ohci: Added fw-ohci device 0000:05:00.1, OHCI version 1.10 [drm] Initialized drm 1.1.0 20060810 Bluetooth: Generic Bluetooth USB driver ver 0.4 usbcore: registered new interface driver btusb yenta_cardbus 0000:05:00.0: CardBus bridge found [17aa:20c6] sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman pci 0000:00:02.0: power state changed by ACPI to D0 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 yenta_cardbus 0000:05:00.0: Socket status: 30000006 yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 21) sdhci-pci 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:05:00.2: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA pci 0000:00:02.0: irq 28 for MSI/MSI-X Non-volatile memory driver v1.3 firewire_core: created device fw0: GUID 001d72ffff8c4eff, S400 thinkpad_acpi: ThinkPad ACPI Extras v0.22 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7SET35WW (1.21 ), EC 7RHT16WW-1.02 thinkpad_acpi: Lenovo ThinkPad X61 Tablet, model 7762WHW thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. input: ThinkPad Extra Buttons as /devices/virtual/input/input7 allocated 1400x1050 fb: 0x007df000, bo ffff88007d3f4b40 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 on minor 0 EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: sda5: found reiserfs format "3.6" with standard journal ReiserFS: sda5: using ordered data mode ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda5: checking transaction log (sda5) ReiserFS: sda5: Using r5 hash to sort names ReiserFS: sda9: found reiserfs format "3.6" with standard journal ReiserFS: sda9: using ordered data mode ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda9: checking transaction log (sda9) ReiserFS: sda9: Using r5 hash to sort names EXT4-fs: barriers enabled kjournald2 starting: pid 2870, dev sda11:8, commit interval 5 seconds EXT4 FS on sda11, internal journal on sda11:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda11 with ordered data mode hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x020b2000 Clocksource tsc unstable (delta = -92488680 ns) iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106) iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn loaded firmware version 228.57.2.23 Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX wlan0: direct probe to AP 00:18:f3:60:0c:fd try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:18:f3:60:0c:fd wlan0: authenticated wlan0: associate with AP 00:18:f3:60:0c:fd wlan0: RX AssocResp from 00:18:f3:60:0c:fd (capab=0x11 status=0 aid=2) wlan0: associated wlan0: authenticate with AP 00:18:f3:60:0c:fd wlan0: authenticated wlan0: associate with AP 00:18:f3:60:0c:fd wlan0: RX ReassocResp from 00:18:f3:60:0c:fd (capab=0x11 status=0 aid=2) wlan0: associated [drm] LVDS-8: set mode 1400x1050 14