>system 00:01: ioport range 0x290-0x30f has been reserved
system 00:01: ioport range 0x880-0x88f has been reserved
system 00:09: ioport range 0x400-0x4bf could not be reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0xf0000-0xfffff could not be reserved
system 00:0c: iomem range 0xfed00000-0xfed000ff has been reserved
system 00:0c: iomem range 0x7f6e0000-0x7f6fffff could not be reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0x100000-0x7f6dffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0c: iomem range 0xfed13000-0xfed1dfff has been reserved
system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0c: iomem range 0xe0000-0xeffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
pci 0000:00:1c.0:   MEM window: 0xfdb00000-0xfdbfffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000fd800000-0x000000fd8fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1:   IO window: 0xe000-0xefff
pci 0000:00:1c.1:   MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:1c.1:   PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
pci 0000:00:1e.0:   MEM window: 0xfda00000-0xfdafffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000fd900000-0x000000fd9fffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xfdb00000-0xfdbfffff]
pci_bus 0000:01: resource 2 pref mem [0xfd800000-0xfd8fffff]
pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:03: resource 1 mem: [0xfda00000-0xfdafffff]
pci_bus 0000:03: resource 2 pref mem [0xfd900000-0xfd9fffff]
pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
NET: Registered protocol family 1
Loading Reiser4. See www.namesys.com for a description of Reiser4.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 4000
alg: No test for stdrng (krng)
io scheduler noop registered (default)
io scheduler fifo registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered
io scheduler vr registered
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: setting latency timer to 64
intel_rng: FWH not detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
ACPI: SSDT 000000007f6e6b40 0026C (v01  PmRef  Cpu0Ist 00003000 INTL 20041203)
processor ACPI_CPU:00: registered as cooling_device0
ACPI: SSDT 000000007f6e7000 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20041203)
processor ACPI_CPU:01: registered as cooling_device1
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] TV-15: set mode NTSC 480i 0
allocated 1024x768 fb: 0x007df000, bo ffff88007e29f600
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
Console: switching to colour frame buffer device 128x48
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
brd: module loaded
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: no MSI. Back to INTx.
eth0: RTL8168c/8111c at 0xffffc20000050000, 00:30:18:a8:48:ee, XID 3c4000c0 IRQ 16
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: no MSI. Back to INTx.
eth1: RTL8168c/8111c at 0xffffc20000054000, 00:30:18:a8:48:ef, XID 3c4000c0 IRQ 17
usbcore: registered new interface driver rt73usb
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.20.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
hda-codec: No codec parser is available
ata1.00: ATA-8: RIDATA  NSSD, 02.10103, max UDMA/100
ata1.00: 62537728 sectors, multi 0: LBA 
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      RIDATA  NSSD     02.1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 62537728 512-byte hardware sectors: (32.0 GB/29.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
  #0: HDA Intel at 0xfdff8000 irq 16
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
reiser4: sda2: found disk format 4.0.0.
VFS: Mounted root (reiser4 filesystem) readonly on device 8:2.
Freeing unused kernel memory: 376k freed
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
udev: starting version 141
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
generic-usb 0003:046D:C01E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
udev: renamed network interface eth1 to eth2
udev: renamed network interface eth0_rename to eth1
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
ata1.00: configured for UDMA/100
ata1: EH complete
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
r8169: eth1: link up
r8169: eth1: link up
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 37
[drm] TMDS-11: set mode 1024x768 38
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 39
[drm] TMDS-11: set mode 1024x768 3a
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 3b
[drm] TMDS-11: set mode 1024x768 3c
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 3d
[drm] TMDS-11: set mode 1024x768 3e
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0011820
vboxdrv: fAsync=0 offMin=0x2f8 offMax=0x1360
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.2.4 (interface 0x000a0009).
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 3f
[drm] TMDS-11: set mode 1024x768 40
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 41
[drm] TMDS-11: set mode 1024x768 42
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 43
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 44
[drm] TMDS-11: set mode 1024x768 34
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 45
[drm] TMDS-11: set mode 1024x768 46
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 47
[drm] TMDS-11: set mode 1024x768 48
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 49
[drm] TMDS-11: set mode 1024x768 4a
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 4b
[drm] TMDS-11: set mode 1024x768 4c
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 4d
[drm] TMDS-11: set mode 1024x768 4e
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 4f
[drm] TMDS-11: set mode 1024x768 50
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 51
[drm] TMDS-11: set mode 1024x768 52
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 53
[drm] TMDS-11: set mode 1024x768 54
[drm] TMDS-11: set mode 1024x768 34
[drm] LVDS-8: set mode 1024x768 24
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 55
i2c-adapter i2c-1: unable to read EDID block.
i915 0000:00:02.0: LVDS-1: no EDID data
[drm] DAC-6: set mode 1280x1024 56