X.Org X Server 1.6.1 Release Date: 2009-4-14 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux linux-giq8 2.6.30-5-default #1 SMP Fri Jun 26 01:49:07 MSD 2009 i686 Build Date: 13 June 2009 07:45:26AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 26 14:10:14 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "" (==) No device specified for screen "Default Screen Section". Using the first device section listed. (**) | |-->Device "Device[0]" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, built-ins (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x3ac0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0@0:2:0) unknown vendor (0x8086) unknown chipset (0x2a02) rev 3, Mem @ 0x92100000/1048576, 0x80000000/268435456, I/O @ 0x00005110/8 (--) PCI: (0@0:2:1) unknown vendor (0x8086) unknown chipset (0x2a03) rev 3, Mem @ 0x92200000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules//extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules//extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules//extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules//extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules//extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules//extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules//drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.7.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (--) intel(0): Linear framebuffer at 0x80000000 (--) intel(0): IO registers at addr 0x92100000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "AUO", prod id 33140 (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0 (II) intel(0): Output TV has no monitor section (II) intel(0): Resizable framebuffer: not available (1 3) (II) intel(0): EDID vendor "AUO", prod id 33140 (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TV disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1280x800 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020 (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400 (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000207 to 0x80000207 (WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS (WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 488960 total, 1 used (II) intel(0): I830CheckAvailableMemory: 1955836 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0x92100000 (II) intel(0): [dri] visual configs initialized (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 19660800 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0ed40000 (pgoffset 60736) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x00000fff: power context (4 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0077f000-0x0ed3ffff: DRI memory manager (235268 kB) (II) intel(0): 0x0ed40000-0x0fffffff: exa offscreen (19200 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x0077f000: start of memory manager (II) intel(0): 0x0079f000-0x00ddefff: depth buffer (6400 kB) Y tiled (II) intel(0): 0x00f9f000-0x015defff: back buffer (6400 kB) X tiled (II) intel(0): 0x0179f000-0x01ddefff: front buffer (6400 kB) X tiled (II) intel(0): 0x01f9f000-0x01f9ffff: overlay registers (4 kB) (II) intel(0): 0x01fa0000-0x01fa9fff: HW cursors (40 kB) (II) intel(0): 0x0ed40000: end of memory manager (WW) intel(0): ESR is 0x00000001 (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): [drm] mapped front buffer at 0x8179f000, handle = 0x8179f000 (II) intel(0): [drm] mapped back buffer at 0x80f9f000, handle = 0x80f9f000 (II) intel(0): [drm] mapped depth buffer at 0x8079f000, handle = 0x8079f000 (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TV is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: XF86DRI Enabled (WW) intel(0): Option "UXA" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: drmOpenMinor returns 12 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 331 x 207 (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/hal: Adding input device Video Bus (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules//input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event8" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us,ru" (**) Option "xkb_variant" ",winkeys" (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-5A17DDA4155713E8019F4322412955515F71D168.xkm (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules//input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.1.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) Synaptics touchpad driver version 1.1.2 (**) Option "Device" "/dev/input/event1" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right middle (**) Option "SHMConfig" "on" (**) Option "HorizScrollDelta" "0" (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00 (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0 (--) SynPS/2 Synaptics TouchPad: touchpad found (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us,ru" (**) Option "xkb_variant" ",winkeys" (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-5A17DDA4155713E8019F4322412955515F71D168.xkm (II) intel(0): EDID vendor "AUO", prod id 33140 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz) (II) intel(0): EDID vendor "AUO", prod id 33140 (II) intel(0): [drm] mapped front buffer at 0x8179f000, handle = 0x122f3000 exaCopyDirty: Pending damage region empty! (II) intel(0): EDID vendor "AUO", prod id 33140 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz) (II) intel(0): EDID vendor "AUO", prod id 33140 (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-B4136E8F67CCCD62982A02C44C80BC03054101BB.xkm