Linux version 2.6.30-gentoo-r4 (root@kancheli) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #1 SMP Mon Aug 3 10:50:27 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f674000 (usable) BIOS-e820: 000000007f674000 - 000000007f6e8000 (ACPI NVS) BIOS-e820: 000000007f6e8000 - 000000007f6ec000 (usable) BIOS-e820: 000000007f6ec000 - 000000007f6ff000 (ACPI data) BIOS-e820: 000000007f6ff000 - 000000007f700000 (usable) DMI 2.3 present. last_pfn = 0x7f700 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F800000 mask FFF800000 uncachable 2 base 07F700000 mask FFFF00000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2040MB, range: 8MB, type UC reg 2, base: 2039MB, range: 1MB, type UC total RAM coverred: 2039M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2039MB, range: 1MB, type UC reg 2, base: 2040MB, range: 8MB, type UC init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000fe020 00014 (v00 INTEL ) ACPI: RSDT 7f6fde48 00054 (v01 INTEL D945GCZ 00000F9C MSFT 01000013) ACPI: FACP 7f6fcf10 00074 (v01 INTEL D945GCZ 00000F9C MSFT 01000013) ACPI: DSDT 7f6f7010 042BF (v01 INTEL D945GCZ 00000F9C MSFT 01000013) ACPI: FACS 7f6dcc40 00040 ACPI: APIC 7f6fce10 00078 (v01 INTEL D945GCZ 00000F9C MSFT 01000013) ACPI: WDDT 7f6f6f90 00040 (v01 INTEL D945GCZ 00000F9C MSFT 01000013) ACPI: MCFG 7f6f6f10 0003C (v01 INTEL D945GCZ 00000F9C MSFT 01000013) ACPI: ASF! 7f6fcd10 000A6 (v32 INTEL D945GCZ 00000F9C MSFT 01000013) ACPI: SSDT 7f6fdc10 001BC (v01 INTEL CpuPm 00000F9C MSFT 01000013) ACPI: SSDT 7f6fda10 00175 (v01 INTEL Cpu0Ist 00000F9C MSFT 01000013) ACPI: SSDT 7f6fd810 00175 (v01 INTEL Cpu1Ist 00000F9C MSFT 01000013) ACPI: SSDT 7f6fd610 00175 (v01 INTEL Cpu2Ist 00000F9C MSFT 01000013) ACPI: SSDT 7f6fd410 00175 (v01 INTEL Cpu3Ist 00000F9C MSFT 01000013) ACPI: SSDT 7f6f6e90 0002F (v01 INTEL SetupVar 00000F9C MSFT 01000013) ACPI: TCPA 7f6e3d90 00028 (v01 INTEL TIANO 00000002 MSFT 01000013) ACPI: Local APIC address 0xfee00000 1151MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (8 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00005d1814] TEXT DATA BSS ==> [0000100000 - 00005d1814] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [00005d2000 - 00005d418d] BRK ==> [00005d2000 - 00005d418d] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00fe680] fe680 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007f700 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f674 0: 0x0007f6e8 -> 0x0007f6ec 0: 0x0007f6ff -> 0x0007f700 On node 0 totalpages: 521752 free_area_init_node: node 0, pgdat c051b400, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2303 pages used for memmap HighMem zone: 292220 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information 4 Processors exceeds NR_CPUS limit of 2 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at 80000000 (gap: 7f700000:80900000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 13 pages at c1ffa000, static data 31388 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517673 Kernel command line: root=/dev/sda2 irqpoll video=uvesafb:1680x1050-32@60,mtrr:3,ywrap Misrouted IRQ fixup and polling support enabled This may significantly impact system performance Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:320 CPU 0 irqstacks, hard=c1ffa000 soft=c1ffb000 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 2799.698 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (000377fe:0007f700) Memory: 2063800k/2087936k available (2950k kernel code, 22352k reserved, 1329k data, 412k init, 1178092k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0534000 - 0xc059b000 ( 412 kB) .data : 0xc03e1870 - 0xc052e048 (1329 kB) .text : 0xc0100000 - 0xc03e1870 (2950 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.39 BogoMIPS (lpj=11198792) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04 CPU 1 irqstacks, hard=c200a000 soft=c200b000 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5600.31 BogoMIPS (lpj=11200624) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (11199.70 BogoMIPS). net_namespace: 736 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 PCI: MCFG area at f0000000 reserved in ACPI motherboard resources PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: Using MMCONFIG for extended config space ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0x90280000-0x902fffff] pci 0000:00:02.0: reg 14 io port: [0x30e0-0x30e7] pci 0000:00:02.0: reg 18 32bit mmio: [0x80000000-0x8fffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0x90300000-0x9033ffff] pci 0000:00:02.1: reg 10 32bit mmio: [0x90200000-0x9027ffff] pci 0000:00:1b.0: reg 10 64bit mmio: [0x90340000-0x90343fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f] pci 0000:00:1d.3: reg 20 io port: [0x3020-0x303f] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90344400-0x903447ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x30b0-0x30bf] pci 0000:00:1f.2: reg 10 io port: [0x30c8-0x30cf] pci 0000:00:1f.2: reg 14 io port: [0x30ec-0x30ef] pci 0000:00:1f.2: reg 18 io port: [0x30c0-0x30c7] pci 0000:00:1f.2: reg 1c io port: [0x30e8-0x30eb] pci 0000:00:1f.2: reg 20 io port: [0x30a0-0x30af] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90344000-0x903443ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f] pci 0000:01:00.0: reg 10 32bit mmio: [0x90180000-0x9019ffff] pci 0000:01:00.0: reg 14 32bit mmio: [0x90100000-0x9017ffff] pci 0000:01:00.0: reg 18 io port: [0x2000-0x201f] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.3: reg 10 io port: [0x2020-0x2027] pci 0000:01:00.3: reg 14 32bit mmio: [0x901a1000-0x901a1fff] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold pci 0000:01:00.3: PME# disabled pci 0000:01:00.4: reg 10 32bit mmio: [0x901a0000-0x901a0fff] pci 0000:01:00.4: reg 14 io port: [0x2028-0x202b] pci 0000:01:00.4: PME# supported from D0 D3hot D3cold pci 0000:01:00.4: PME# disabled pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.0: bridge 32bit mmio: [0x90100000-0x901fffff] pci 0000:06:00.0: reg 10 io port: [0x1000-0x10ff] pci 0000:06:00.0: reg 14 32bit mmio: [0x90000000-0x900000ff] pci 0000:06:00.0: supports D1 D2 pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved system 00:01: iomem range 0xc0000-0xdffff could not be reserved system 00:01: iomem range 0xe0000-0xfffff could not be reserved system 00:06: ioport range 0x500-0x53f has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x680-0x6ff has been reserved system 00:07: iomem range 0xfed40000-0xfed44fff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0x90100000-0x901fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: disabled pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0x1000-0x1fff pci 0000:00:1e.0: MEM window: 0x90000000-0x900fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] pci_bus 0000:01: resource 1 mem: [0x90100000-0x901fffff] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff] pci_bus 0000:06: resource 1 mem: [0x90000000-0x900fffff] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1251385100.344:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 1731 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.5: setting latency timer to 64 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945G Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 uvesafb: Intel Corporation, Intel(r) 82945G Chipset Family Graphics Controller, Hardware Version 0.0, OEM: Intel(r) 82945G Chipset Family Graphics Chip Accelerated VGA BIOS, VBE v3.0 uvesafb: VBIOS/hardware supports DDC2 transfers uvesafb: monitor limits: vf = 75 Hz, hf = 83 kHz, clk = 160 MHz uvesafb: scrolling: redraw Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Console: switching to colour frame buffer device 240x90 uvesafb: framebuffer at 0x80000000, mapped to 0xf8200000, using 7872k, total 7872k fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:01:00.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 serial8250: skipping TxEn test for device [8086:108f] subsystem [8086:0000] 0000:01:00.3: ttyS1 at I/O 0x2020 (irq = 18) is a 16550A brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01) PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x30b0-0x30b7 Probing IDE interface ide0... hda: _NEC DV-5800E, ATAPI CD/DVD-ROM drive hdb: _NEC DVD_RW ND-3551A, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 48X DVD-ROM drive, 1725kB Cache Uniform CD-ROM driver Revision: 3.20 ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 29 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0x90344000 port 0x90344100 irq 29 ata2: SATA max UDMA/133 abar m1024@0x90344000 port 0x90344180 irq 29 ata3: SATA max UDMA/133 abar m1024@0x90344000 port 0x90344200 irq 29 ata4: SATA max UDMA/133 abar m1024@0x90344000 port 0x90344280 irq 29 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:01:00.0: setting latency timer to 64 e1000e 0000:01:00.0: irq 30 for MSI/MSI-X e1000e 0000:01:00.0: Warning: detected ASPM enabled in EEPROM 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:c4:4d:37 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90344400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.30-gentoo-r4 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.20. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input1 input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input2 input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input3 input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input4 input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input5 input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input6 input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input7 ALSA device list: #0: HDA Intel at 0x90340000 irq 22 TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata1.00: ATA-7: Hitachi HDS721680PLA380, P21OA70A, max UDMA/133 ata1.00: 160836480 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72168 P21O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors: (82.3 GB/76.6 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 <<6>ata4: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:2. Freeing unused kernel memory: 412k freed udev: starting version 145 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 ACPI: Power Button [PWRF] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9 ACPI: Sleep Button [SLPB] processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.30-gentoo-r4 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.30-gentoo-r4 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.30-gentoo-r4 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.30-gentoo-r4 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs sd 0:0:0:0: Attached scsi generic sg0 type 0 usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: New USB device found, idVendor=046d, idProduct=c03d usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: USB-PS/2 Optical Mouse usb 4-1: Manufacturer: Logitech usb 4-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input10 generic-usb 0003:046D:C03D.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with writeback data mode. e1000e 0000:01:00.0: irq 30 for MSI/MSI-X e1000e 0000:01:00.0: irq 30 for MSI/MSI-X e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:01:00.0: eth0: 10/100 speed: disabling TSO ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky platform microcode: firmware: requesting intel-ucode/0f-06-04 platform microcode: firmware: requesting intel-ucode/0f-06-04 Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed.