[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.33-2-686-bigmem (Debian 2.6.33-1~experimental.2) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Mon Mar 1 06:59:58 UTC 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7d80000 (usable) [ 0.000000] BIOS-e820: 00000000c7d80000 - 00000000c7d8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7d8e000 - 00000000c7dd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7dd0000 - 00000000c7e00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FE0000000 write-back [ 0.000000] 2 base 120000000 mask FF0000000 write-back [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 base 0C7E00000 mask FFFE00000 uncachable [ 0.000000] 6 base 0C8000000 mask FF8000000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 512MB, type WB [ 0.000000] reg 2, base: 4608MB, range: 256MB, type WB [ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC [ 0.000000] reg 4, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 5, base: 3198MB, range: 2MB, type UC [ 0.000000] reg 6, base: 3200MB, range: 128MB, type UC [ 0.000000] total RAM covered: 3966M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 128MB, type WB [ 0.000000] reg 3, base: 3198MB, range: 2MB, type UC [ 0.000000] reg 4, base: 4GB, range: 512MB, type WB [ 0.000000] reg 5, base: 4608MB, range: 256MB, type WB [ 0.000000] e820 update range: 00000000c7e00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037600000 page 2M [ 0.000000] 0037600000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1c000 [ 0.000000] RAMDISK: 377eb000 - 37fef799 [ 0.000000] Allocated new RAMDISK: 00100000 - 00904799 [ 0.000000] Move RAMDISK from 00000000377eb000 - 0000000037fef798 to 00100000 - 00904798 [ 0.000000] ACPI: RSDP 000fb900 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT c7d80000 00044 (v01 A_M_I_ OEMRSDT 07000908 MSFT 00000097) [ 0.000000] ACPI: FACP c7d80200 00084 (v02 A_M_I_ OEMFACP 07000908 MSFT 00000097) [ 0.000000] ACPI: DSDT c7d80440 090EB (v01 A0982 A0982070 00000070 INTL 20060113) [ 0.000000] ACPI: FACS c7d8e000 00040 [ 0.000000] ACPI: APIC c7d80390 0006C (v01 A_M_I_ OEMAPIC 07000908 MSFT 00000097) [ 0.000000] ACPI: MCFG c7d80400 0003C (v01 A_M_I_ OEMMCFG 07000908 MSFT 00000097) [ 0.000000] ACPI: OEMB c7d8e040 00089 (v01 A_M_I_ AMI_OEM 07000908 MSFT 00000097) [ 0.000000] ACPI: HPET c7d89530 00038 (v01 A_M_I_ OEMHPET 07000908 MSFT 00000097) [ 0.000000] ACPI: GSCI c7d8e0d0 02024 (v01 A_M_I_ GMCHSCI 07000908 MSFT 00000097) [ 0.000000] ACPI: OSFR c7d89570 000B0 (v01 A_M_I_ OEMOSFR 07000908 MSFT 00000097) [ 0.000000] ACPI: SSDT c7d90b50 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3976MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00019000 - 0001ff00 [ 0.000000] (14 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0001000000 - 00014e4b48] TEXT DATA BSS ==> [0001000000 - 00014e4b48] [ 0.000000] #3 [00014e5000 - 00014f2224] BRK ==> [00014e5000 - 00014f2224] [ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000] [ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790] [ 0.000000] #6 [000009ec00 - 00000f1350] BIOS reserved ==> [000009ec00 - 00000f1350] [ 0.000000] #7 [00000f149c - 00000ff780] BIOS reserved ==> [00000f149c - 00000ff780] [ 0.000000] #8 [00000f1350 - 00000f149c] MP-table mpc ==> [00000f1350 - 00000f149c] [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000] [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000] [ 0.000000] #11 [0000015000 - 0000019000] PGTABLE ==> [0000015000 - 0000019000] [ 0.000000] #12 [0000100000 - 0000904799] NEW RAMDISK ==> [0000100000 - 0000904799] [ 0.000000] #13 [0000019000 - 0000020000] BOOTMAP ==> [0000019000 - 0000020000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000c7d80 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1015054 [ 0.000000] free_area_init_node: node 0, pgdat c13bc9c0, node_mem_map c14f4200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7953 pages used for memmap [ 0.000000] HighMem zone: 779889 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c7e00000 (gap: c7e00000:37000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c3c00000 s37656 r0 d23784 u524288 [ 0.000000] pcpu-alloc: s37656 r0 d23784 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1005325 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33-2-686-bigmem root=UUID=ebf99f0b-d7aa-418b-b701-79c60a34dfed ro quiet video=i915:modeset=1 enable_mtrr_cleanup mtrr_spare_reg_nr=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Initializing HighMem for node 0 (000377fe:00130000) [ 0.000000] Memory: 4005756k/4980736k available (2507k kernel code, 53336k reserved, 1360k data, 384k init, 3151368k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc13c7000 - 0xc1427000 ( 384 kB) [ 0.000000] .data : 0xc1272e55 - 0xc13c6f94 (1360 kB) [ 0.000000] .text : 0xc1000000 - 0xc1272e55 (2507 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3000.315 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.63 BogoMIPS (lpj=12001260) [ 0.004014] Security Framework initialized [ 0.004019] SELinux: Disabled at boot. [ 0.004024] Mount-cache hash table entries: 512 [ 0.004108] Initializing cgroup subsys ns [ 0.004110] Initializing cgroup subsys cpuacct [ 0.004113] Initializing cgroup subsys devices [ 0.004115] Initializing cgroup subsys freezer [ 0.004116] Initializing cgroup subsys net_cls [ 0.004133] CPU: Physical Processor ID: 0 [ 0.004134] CPU: Processor Core ID: 0 [ 0.004136] mce: CPU supports 6 MCE banks [ 0.004142] CPU0: Thermal monitoring enabled (TM2) [ 0.004145] using mwait in idle threads. [ 0.004150] Performance Events: Core2 events, Intel PMU driver. [ 0.004153] ... version: 2 [ 0.004154] ... bit width: 40 [ 0.004155] ... generic registers: 2 [ 0.004156] ... value mask: 000000ffffffffff [ 0.004157] ... max period: 000000007fffffff [ 0.004158] ... fixed-purpose events: 3 [ 0.004159] ... event mask: 0000000700000003 [ 0.004164] Checking 'hlt' instruction... OK. [ 0.020932] ACPI: Core revision 20091214 [ 0.032037] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.032336] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.075225] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a [ 0.076000] Booting Node 0, Processors #1 [ 0.008000] Initializing CPU#1 [ 0.164038] Brought up 2 CPUs [ 0.164040] Total of 2 processors activated (11999.84 BogoMIPS). [ 0.164868] devtmpfs: initialized [ 0.164868] regulator: core version 0.5 [ 0.164868] NET: Registered protocol family 16 [ 0.164868] ACPI: bus type pci registered [ 0.164868] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.164868] PCI: not using MMCONFIG [ 0.164868] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.164868] PCI: Using configuration type 1 for base access [ 0.164868] bio: create slab at 0 [ 0.164868] ACPI: EC: Look up EC in DSDT [ 0.168836] ACPI: Executed 1 blocks of module-level executable AML code [ 0.177958] ACPI: Interpreter enabled [ 0.177966] ACPI: (supports S0 S1 S3 S4 S5) [ 0.177983] ACPI: Using IOAPIC for interrupt routing [ 0.178023] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.180132] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.180134] PCI: Using MMCONFIG for extended config space [ 0.186185] ACPI Warning: Incorrect checksum in table [OEMB] - 0C, should be 0B (20091214/tbutils-314) [ 0.186982] ACPI: No dock devices found. [ 0.187104] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.187119] pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them [ 0.187345] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.187347] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.187349] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.187351] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.187353] pci_root PNP0A08:00: host bridge window [mem 0xc7e00000-0xdfffffff] (ignored) [ 0.187355] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored) [ 0.187394] pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit] [ 0.187399] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.187402] pci 0000:00:02.0: reg 20: [io 0xdc00-0xdc07] [ 0.187425] pci 0000:00:02.1: reg 10: [mem 0xfe900000-0xfe9fffff 64bit] [ 0.187488] pci 0000:00:1a.0: reg 20: [io 0xd480-0xd49f] [ 0.187539] pci 0000:00:1a.1: reg 20: [io 0xd800-0xd81f] [ 0.187589] pci 0000:00:1a.2: reg 20: [io 0xd880-0xd89f] [ 0.187638] pci 0000:00:1a.7: reg 10: [mem 0xfe8fb000-0xfe8fb3ff] [ 0.187682] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.187686] pci 0000:00:1a.7: PME# disabled [ 0.187712] pci 0000:00:1b.0: reg 10: [mem 0xfe8f4000-0xfe8f7fff 64bit] [ 0.187744] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.187747] pci 0000:00:1b.0: PME# disabled [ 0.187797] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.187800] pci 0000:00:1c.0: PME# disabled [ 0.187853] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.187856] pci 0000:00:1c.5: PME# disabled [ 0.187895] pci 0000:00:1d.0: reg 20: [io 0xd000-0xd01f] [ 0.187945] pci 0000:00:1d.1: reg 20: [io 0xd080-0xd09f] [ 0.188002] pci 0000:00:1d.2: reg 20: [io 0xd400-0xd41f] [ 0.188052] pci 0000:00:1d.7: reg 10: [mem 0xfe8fa000-0xfe8fa3ff] [ 0.188096] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.188100] pci 0000:00:1d.7: PME# disabled [ 0.188191] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.188194] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.188197] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.188241] pci 0000:00:1f.2: reg 10: [io 0xc880-0xc887] [ 0.188245] pci 0000:00:1f.2: reg 14: [io 0xc800-0xc803] [ 0.188249] pci 0000:00:1f.2: reg 18: [io 0xc480-0xc487] [ 0.188253] pci 0000:00:1f.2: reg 1c: [io 0xc400-0xc403] [ 0.188257] pci 0000:00:1f.2: reg 20: [io 0xc080-0xc09f] [ 0.188262] pci 0000:00:1f.2: reg 24: [mem 0xfe8f8000-0xfe8f87ff] [ 0.188285] pci 0000:00:1f.2: PME# supported from D3hot [ 0.188288] pci 0000:00:1f.2: PME# disabled [ 0.188309] pci 0000:00:1f.3: reg 10: [mem 0xfe8f9000-0xfe8f90ff 64bit] [ 0.188319] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.188360] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.188368] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.188397] pci 0000:01:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.188414] pci 0000:01:00.0: reg 18: [mem 0xfeaff000-0xfeafffff 64bit] [ 0.188426] pci 0000:01:00.0: reg 20: [mem 0xfdef0000-0xfdefffff 64bit pref] [ 0.188433] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref] [ 0.188466] pci 0000:01:00.0: supports D1 D2 [ 0.188467] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.188471] pci 0000:01:00.0: PME# disabled [ 0.196040] pci 0000:00:1c.5: PCI bridge to [bus 01-01] [ 0.196044] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.196048] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] [ 0.196053] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.196084] pci 0000:03:03.0: reg 10: [mem 0xfebff000-0xfebfffff] [ 0.196126] pci 0000:03:03.0: supports D1 D2 [ 0.196128] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot [ 0.196132] pci 0000:03:03.0: PME# disabled [ 0.196175] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.196180] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.196193] pci_bus 0000:00: on NUMA node 0 [ 0.196196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.196344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.196410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.196466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.209308] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.209395] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.209480] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.209564] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.209649] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.209735] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.209819] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.209904] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.209969] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.209977] vgaarb: loaded [ 0.210013] PCI: Using ACPI for IRQ routing [ 0.210015] PCI: pci_cache_line_size set to 64 bytes [ 0.210123] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.210128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.210132] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.216007] Switching to clocksource tsc [ 0.216987] pnp: PnP ACPI init [ 0.216992] ACPI: bus type pnp registered [ 0.219250] pnp: PnP ACPI: found 15 devices [ 0.219251] ACPI: ACPI bus type pnp unregistered [ 0.219254] PnPBIOS: Disabled by ACPI PNP [ 0.219260] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.219265] system 00:06: [io 0x0290-0x029f] has been reserved [ 0.219269] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.219271] system 00:07: [io 0x0800-0x087f] has been reserved [ 0.219273] system 00:07: [io 0x0500-0x057f] could not be reserved [ 0.219275] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.219277] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.219279] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.219282] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.219286] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved [ 0.219290] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.219292] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.219295] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.219299] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.219301] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.219303] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.219305] system 00:0e: [mem 0x00100000-0xc7dfffff] could not be reserved [ 0.219307] system 00:0e: [mem 0xe0000000-0xffffffff] could not be reserved [ 0.253932] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc8000000-0xc83fffff] [ 0.253935] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.253937] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.253939] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.253943] pci 0000:00:1c.0: bridge window [mem 0xc8000000-0xc83fffff] [ 0.253946] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.253950] pci 0000:00:1c.5: PCI bridge to [bus 01-01] [ 0.253952] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.253956] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] [ 0.253959] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.253964] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.253965] pci 0000:00:1e.0: bridge window [io disabled] [ 0.253968] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.253971] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.253979] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.253984] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.253987] pci 0000:00:1c.0: setting latency timer to 64 [ 0.253993] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.253996] pci 0000:00:1c.5: setting latency timer to 64 [ 0.254001] pci 0000:00:1e.0: setting latency timer to 64 [ 0.254003] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.254005] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.254007] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.254008] pci_bus 0000:02: resource 1 [mem 0xc8000000-0xc83fffff] [ 0.254010] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.254012] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.254013] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.254015] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.254017] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.254018] pci_bus 0000:03: resource 3 [io 0x0000-0xffff] [ 0.254020] pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffffffffffff] [ 0.254030] NET: Registered protocol family 2 [ 0.254061] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.254181] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.254429] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.254543] TCP: Hash tables configured (established 131072 bind 65536) [ 0.254545] TCP reno registered [ 0.254547] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.254552] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.254591] NET: Registered protocol family 1 [ 0.254599] pci 0000:00:02.0: Boot video device [ 0.254707] PCI: CLS 32 bytes, default 64 [ 0.254732] Unpacking initramfs... [ 0.418671] Freeing initrd memory: 8209k freed [ 0.421232] audit: initializing netlink socket (disabled) [ 0.421243] type=2000 audit(1268165147.419:1): initialized [ 0.421573] highmem bounce pool size: 64 pages [ 0.421576] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.422500] VFS: Disk quotas dquot_6.5.2 [ 0.422530] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.422581] msgmni has been set to 1686 [ 0.422698] alg: No test for stdrng (krng) [ 0.422729] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.422731] io scheduler noop registered [ 0.422732] io scheduler deadline registered [ 0.422770] io scheduler cfq registered (default) [ 0.422826] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.422857] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.422913] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.422939] pcieport 0000:00:1c.5: irq 25 for MSI/MSI-X [ 0.423056] isapnp: Scanning for PnP cards... [ 0.775825] isapnp: No Plug & Play device found [ 0.776741] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.776821] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.777073] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.777177] PNP: No PS/2 controller found. Probing ports directly. [ 0.779940] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.779944] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.779978] mice: PS/2 mouse device common for all mice [ 0.780012] rtc_cmos 00:03: RTC can wake from S4 [ 0.780033] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.780053] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.780062] cpuidle: using governor ladder [ 0.780064] cpuidle: using governor menu [ 0.780066] No iBFT detected. [ 0.780211] TCP cubic registered [ 0.780301] NET: Registered protocol family 10 [ 0.780520] lo: Disabled Privacy Extensions [ 0.780659] Mobile IPv6 [ 0.780661] NET: Registered protocol family 17 [ 0.780671] Using IPI No-Shortcut mode [ 0.780710] PM: Resume from disk failed. [ 0.780713] registered taskstats version 1 [ 0.780914] rtc_cmos 00:03: setting system clock to 2010-03-09 20:05:48 UTC (1268165148) [ 0.780948] Freeing unused kernel memory: 384k freed [ 0.781067] Write protecting the kernel text: 2508k [ 0.781086] Write protecting the kernel read-only data: 916k [ 0.844754] Linux agpgart interface v0.103 [ 0.846301] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset [ 0.847558] agpgart-intel 0000:00:00.0: detected 131068K stolen memory [ 0.860531] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.868070] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.868074] ACPI: Power Button [PWRB] [ 0.868107] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.868109] ACPI: Power Button [PWRF] [ 0.878465] [drm] Initialized drm 1.1.0 20060810 [ 0.889780] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.889783] i915 0000:00:02.0: setting latency timer to 64 [ 0.894963] i915 0000:00:02.0: irq 26 for MSI/MSI-X [ 0.894969] [drm] set up 127M of stolen space [ 1.293493] Console: switching to colour frame buffer device 210x65 [ 1.298821] fb0: inteldrmfb frame buffer device [ 1.298822] registered panic notifier [ 1.298855] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.383826] usbcore: registered new interface driver usbfs [ 1.383858] usbcore: registered new interface driver hub [ 1.383968] usbcore: registered new device driver usb [ 1.392436] SCSI subsystem initialized [ 1.393614] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.393641] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.393655] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.393658] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.393670] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.393692] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.397564] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.397744] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8fb000 [ 1.404919] libata version 3.00 loaded. [ 1.409043] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.409054] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.409158] r8169 0000:01:00.0: setting latency timer to 64 [ 1.409200] r8169 0000:01:00.0: irq 27 for MSI/MSI-X [ 1.409577] eth0: RTL8168c/8111c at 0xf92cc000, 00:22:15:8a:83:5f, XID 1c4000c0 IRQ 27 [ 1.412310] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.412323] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.412325] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.412326] usb usb1: Product: EHCI Host Controller [ 1.412328] usb usb1: Manufacturer: Linux 2.6.33-2-686-bigmem ehci_hcd [ 1.412329] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.412398] hub 1-0:1.0: USB hub found [ 1.412401] hub 1-0:1.0: 6 ports detected [ 1.412439] ahci 0000:00:1f.2: version 3.0 [ 1.412447] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.412470] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 1.412491] firewire_ohci 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.412503] ahci: SSS flag set, parallel bus scan disabled [ 1.412530] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.412533] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 1.412536] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.452039] scsi0 : ahci [ 1.452128] scsi1 : ahci [ 1.452182] scsi2 : ahci [ 1.452225] scsi3 : ahci [ 1.452263] scsi4 : ahci [ 1.452302] scsi5 : ahci [ 1.452422] ata1: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8100 irq 28 [ 1.452424] ata2: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8180 irq 28 [ 1.452426] ata3: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8200 irq 28 [ 1.452428] ata4: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8280 irq 28 [ 1.452430] ata5: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8300 irq 28 [ 1.452432] ata6: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8380 irq 28 [ 1.452460] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.452470] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.452472] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.452478] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.452495] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.456391] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.456400] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8fa000 [ 1.472008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.472023] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.472026] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.472028] usb usb2: Product: EHCI Host Controller [ 1.472030] usb usb2: Manufacturer: Linux 2.6.33-2-686-bigmem ehci_hcd [ 1.472033] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.472117] hub 2-0:1.0: USB hub found [ 1.472121] hub 2-0:1.0: 6 ports detected [ 1.484507] firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI version 1.0 [ 1.486160] uhci_hcd: USB Universal Host Controller Interface driver [ 1.486188] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.486192] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.486194] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.486200] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.486224] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d480 [ 1.486245] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.486246] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.486248] usb usb3: Product: UHCI Host Controller [ 1.486249] usb usb3: Manufacturer: Linux 2.6.33-2-686-bigmem uhci_hcd [ 1.486251] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.486350] hub 3-0:1.0: USB hub found [ 1.486353] hub 3-0:1.0: 2 ports detected [ 1.486385] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.486389] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.486391] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.486396] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.486418] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800 [ 1.486437] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.486439] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.486440] usb usb4: Product: UHCI Host Controller [ 1.486442] usb usb4: Manufacturer: Linux 2.6.33-2-686-bigmem uhci_hcd [ 1.486443] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.486538] hub 4-0:1.0: USB hub found [ 1.486541] hub 4-0:1.0: 2 ports detected [ 1.486571] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.486575] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.486577] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.486582] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.486600] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d880 [ 1.486619] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.486621] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.486623] usb usb5: Product: UHCI Host Controller [ 1.486624] usb usb5: Manufacturer: Linux 2.6.33-2-686-bigmem uhci_hcd [ 1.486626] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.486720] hub 5-0:1.0: USB hub found [ 1.486724] hub 5-0:1.0: 2 ports detected [ 1.486754] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.486758] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.486760] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.486765] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.486784] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d000 [ 1.486806] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.486808] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.486809] usb usb6: Product: UHCI Host Controller [ 1.486811] usb usb6: Manufacturer: Linux 2.6.33-2-686-bigmem uhci_hcd [ 1.486812] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.486890] hub 6-0:1.0: USB hub found [ 1.486893] hub 6-0:1.0: 2 ports detected [ 1.486922] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.486926] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.486928] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.486933] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.486951] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080 [ 1.486971] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.486972] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.486974] usb usb7: Product: UHCI Host Controller [ 1.486975] usb usb7: Manufacturer: Linux 2.6.33-2-686-bigmem uhci_hcd [ 1.486977] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.487030] hub 7-0:1.0: USB hub found [ 1.487032] hub 7-0:1.0: 2 ports detected [ 1.487061] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.487065] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.487068] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.487072] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.487090] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400 [ 1.487109] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.487111] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.487112] usb usb8: Product: UHCI Host Controller [ 1.487113] usb usb8: Manufacturer: Linux 2.6.33-2-686-bigmem uhci_hcd [ 1.487115] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.487168] hub 8-0:1.0: USB hub found [ 1.487170] hub 8-0:1.0: 2 ports detected [ 1.896008] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 1.936510] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.936736] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133 [ 1.936739] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.937013] ata1.00: configured for UDMA/133 [ 1.952091] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5 [ 1.984550] firewire_core: created device fw0: GUID 001e8c00016fc3c7, S400 [ 2.028331] usb 2-2: New USB device found, idVendor=058f, idProduct=6254 [ 2.028334] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.028487] hub 2-2:1.0: USB hub found [ 2.028579] hub 2-2:1.0: 4 ports detected [ 2.199998] usb 2-6: new high speed USB device using ehci_hcd and address 5 [ 2.340637] usb 2-6: New USB device found, idVendor=05ac, idProduct=1006 [ 2.340640] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.340642] usb 2-6: Product: Keyboard Hub [ 2.340644] usb 2-6: Manufacturer: Apple, Inc. [ 2.340646] usb 2-6: SerialNumber: 000000000000 [ 2.340903] hub 2-6:1.0: USB hub found [ 2.341010] hub 2-6:1.0: 3 ports detected [ 2.580007] usb 6-1: new full speed USB device using uhci_hcd and address 2 [ 2.840510] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.848016] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7 [ 2.848019] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.850063] ata2.00: configured for UDMA/133 [ 2.864068] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 2.957489] usb 6-1: New USB device found, idVendor=0a12, idProduct=0001 [ 2.957492] usb 6-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.957494] usb 6-1: Product: BT2.0 [ 3.200006] usb 8-1: new low speed USB device using uhci_hcd and address 2 [ 3.374702] usb 8-1: New USB device found, idVendor=046d, idProduct=c50e [ 3.374705] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.374707] usb 8-1: Product: USB RECEIVER [ 3.374709] usb 8-1: Manufacturer: Logitech [ 3.464147] usb 2-2.1: new high speed USB device using ehci_hcd and address 6 [ 3.574244] usb 2-2.1: New USB device found, idVendor=058f, idProduct=6362 [ 3.574247] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.574249] usb 2-2.1: Product: Mass Storage Device [ 3.574251] usb 2-2.1: Manufacturer: Generic [ 3.574253] usb 2-2.1: SerialNumber: 058F312D81B [ 3.578918] Initializing USB Mass Storage driver... [ 3.578978] scsi6 : usb-storage 2-2.1:1.0 [ 3.579019] usbcore: registered new interface driver usb-storage [ 3.579020] USB Mass Storage support registered. [ 3.644103] usb 2-6.2: new low speed USB device using ehci_hcd and address 7 [ 3.742455] usb 2-6.2: New USB device found, idVendor=05ac, idProduct=0221 [ 3.742458] usb 2-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.742460] usb 2-6.2: Product: Apple Keyboard [ 3.742462] usb 2-6.2: Manufacturer: Apple, Inc [ 3.746404] usbcore: registered new interface driver hiddev [ 3.752511] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.753370] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100, ATAPI AN [ 3.754541] ata3.00: configured for UDMA/100 [ 3.763847] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2 [ 3.763881] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-1/input0 [ 3.763930] usbcore: registered new interface driver usbhid [ 3.763931] usbhid: USB HID core driver [ 3.768278] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input3 [ 3.768311] apple 0003:05AC:0221.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2/input0 [ 3.769122] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5 [ 3.771366] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.1/input/input4 [ 3.771453] apple 0003:05AC:0221.0003: input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2/input1 [ 4.088012] ata4: SATA link down (SStatus 0 SControl 300) [ 4.424011] ata5: SATA link down (SStatus 0 SControl 300) [ 5.328010] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.348519] ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 [ 5.348522] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.350528] ata6.00: configured for UDMA/133 [ 5.364068] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 5.370666] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 5.370699] sd 0:0:0:0: [sda] Write Protect is off [ 5.370701] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.370715] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.370800] sda: [ 5.370852] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.370942] sd 1:0:0:0: [sdb] Write Protect is off [ 5.370944] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.370960] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.371046] sdb: sda1 [ 5.371179] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.371238] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.371270] sd 5:0:0:0: [sdc] Write Protect is off [ 5.371272] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.371286] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.371360] sdc: sdc1 [ 5.382147] sd 5:0:0:0: [sdc] Attached SCSI disk [ 5.415187] sdb1 [ 5.415406] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.420972] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.420975] Uniform CD-ROM driver Revision: 3.20 [ 5.421046] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 5.423556] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.423597] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.423803] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 5.423826] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 5.716537] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 5.913476] udev: starting version 151 [ 5.971738] ACPI: SSDT c7d90100 00277 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 5.972187] ACPI: SSDT c7d90600 004B2 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 5.979169] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.979173] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] [ 5.979225] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.984820] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 6.003365] Monitor-Mwait will be used to enter C-1 state [ 6.036440] Monitor-Mwait will be used to enter C-2 state [ 6.054282] Monitor-Mwait will be used to enter C-3 state [ 6.054289] Marking TSC unstable due to TSC halts in idle [ 6.054756] ACPI: SSDT c7d90380 00277 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 6.055087] ACPI: SSDT c7d90ac0 00085 (v01 PmRef P002Cst 00003000 INTL 20060113) [ 6.065765] Switching to clocksource hpet [ 6.134112] Bluetooth: Core ver 2.15 [ 6.134176] NET: Registered protocol family 31 [ 6.134177] Bluetooth: HCI device and connection manager initialized [ 6.134179] Bluetooth: HCI socket layer initialized [ 6.137021] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 6.137083] usbcore: registered new interface driver btusb [ 6.167196] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.167231] HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X [ 6.167250] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.266280] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 6.557059] loop: module loaded [ 6.648142] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended [ 6.652796] EXT4-fs (sdc1): mounted filesystem with ordered data mode [ 6.687473] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended [ 6.692424] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 6.782531] fuse init (API version 7.13) [ 7.017259] Bluetooth: L2CAP ver 2.14 [ 7.017261] Bluetooth: L2CAP socket layer initialized [ 7.021147] Bluetooth: RFCOMM TTY layer initialized [ 7.021149] Bluetooth: RFCOMM socket layer initialized [ 7.021150] Bluetooth: RFCOMM ver 1.11 [ 7.036634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.036636] Bluetooth: BNEP filters: protocol multicast [ 7.044927] Bridge firewalling registered [ 7.065639] Bluetooth: SCO (Voice Link) ver 0.6 [ 7.065641] Bluetooth: SCO socket layer initialized [ 7.065777] r8169: eth0: link up [ 7.065782] r8169: eth0: link up [ 7.090917] lp: driver loaded but no devices found [ 7.099844] ppdev: user-space parallel port driver [ 8.581109] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 8.581605] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 8.582101] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 8.582602] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 8.582881] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 8.582970] sd 6:0:0:1: Attached scsi generic sg5 type 0 [ 8.583053] sd 6:0:0:2: Attached scsi generic sg6 type 0 [ 8.583131] sd 6:0:0:3: Attached scsi generic sg7 type 0 [ 8.589472] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 8.594724] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 8.596600] sd 6:0:0:2: [sdf] Attached SCSI removable disk [ 8.597846] sd 6:0:0:3: [sdg] Attached SCSI removable disk [ 17.072506] eth0: no IPv6 routers present [15820.076162] usb 2-2.1: reset high speed USB device using ehci_hcd and address 6 [86425.076175] usb 2-2.1: reset high speed USB device using ehci_hcd and address 6 [129152.076617] usb 2-2.1: reset high speed USB device using ehci_hcd and address 6 [179182.308065] sr0: CDROM not ready. Make sure there is a disc in the drive. [179182.311833] sr0: CDROM not ready. Make sure there is a disc in the drive. [179182.691430] sr0: CDROM not ready. Make sure there is a disc in the drive. [179198.131711] sr0: CDROM not ready. Make sure there is a disc in the drive. [179235.388704] sr0: CDROM not ready. Make sure there is a disc in the drive. [179237.292332] sr0: CDROM not ready. Make sure there is a disc in the drive. [179237.295297] sr0: CDROM not ready. Make sure there is a disc in the drive. [179237.649930] sr0: CDROM not ready. Make sure there is a disc in the drive. [179260.418667] sr0: CDROM not ready. Make sure there is a disc in the drive. [179289.420162] sr0: CDROM not ready. Make sure there is a disc in the drive. [179302.517585] sr0: CDROM not ready. Make sure there is a disc in the drive. [179302.523722] sr0: CDROM not ready. Make sure there is a disc in the drive. [179302.937838] sr0: CDROM not ready. Make sure there is a disc in the drive. [179307.764877] sr0: CDROM not ready. Make sure there is a disc in the drive. [179310.181534] sr0: CDROM not ready. Make sure there is a disc in the drive. [179310.184261] sr0: CDROM not ready. Make sure there is a disc in the drive. [179310.537430] sr0: CDROM not ready. Make sure there is a disc in the drive. [179315.006570] sr0: CDROM not ready. Make sure there is a disc in the drive. [179316.744013] sr0: CDROM not ready. Make sure there is a disc in the drive. [179316.747017] sr0: CDROM not ready. Make sure there is a disc in the drive. [179317.096067] sr0: CDROM not ready. Make sure there is a disc in the drive. [179331.291741] sr0: CDROM not ready. Make sure there is a disc in the drive. [179387.154435] sr0: CDROM not ready. Make sure there is a disc in the drive. [179427.153811] sr0: CDROM not ready. Make sure there is a disc in the drive. [179427.156803] sr0: CDROM not ready. Make sure there is a disc in the drive. [179427.497776] sr0: CDROM not ready. Make sure there is a disc in the drive. [179448.060310] sr0: CDROM not ready. Make sure there is a disc in the drive. [179467.838351] sr0: CDROM not ready. Make sure there is a disc in the drive. [179498.792016] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179498.792023] render error detected, EIR: 0x00000000 [179498.792036] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 30368441 at 30368440) [179499.120013] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179499.120018] render error detected, EIR: 0x00000000 [179499.120055] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 30368442 at 30368440) [179499.420513] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179499.420518] render error detected, EIR: 0x00000000 [179499.420527] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 30368445 at 30368440) [179499.720020] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179499.720025] render error detected, EIR: 0x00000000 [179499.720036] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 30368449 at 30368440) [179502.112510] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179502.112515] render error detected, EIR: 0x00000000 [179502.112814] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 30368450 at 30368440) [179502.416506] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179502.416511] render error detected, EIR: 0x00000000 [179502.416521] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 30368451 at 30368440) [179503.524510] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179503.524515] render error detected, EIR: 0x00000000 [179503.524854] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 30368452 at 30368440) [179503.824510] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179503.824513] render error detected, EIR: 0x00000000 [179503.824714] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 30368454 at 30368440) [179504.144511] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179504.144515] render error detected, EIR: 0x00000000 [179504.144524] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 30368455 at 30368440) [179504.484510] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179504.484513] render error detected, EIR: 0x00000000 [179504.936509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179504.936512] render error detected, EIR: 0x00000000 [179504.936569] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 30368459 at 30368440) [179505.336509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179505.336514] render error detected, EIR: 0x00000000 [179506.136510] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179506.136513] render error detected, EIR: 0x00000000 [179506.536510] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179506.536512] render error detected, EIR: 0x00000000 [179507.336509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179507.336512] render error detected, EIR: 0x00000000 [179507.736508] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179507.736511] render error detected, EIR: 0x00000000 [179508.536508] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179508.536511] render error detected, EIR: 0x00000000 [179508.936510] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179508.936513] render error detected, EIR: 0x00000000 [179509.736510] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179509.736512] render error detected, EIR: 0x00000000 [179510.136509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179510.136512] render error detected, EIR: 0x00000000 [179510.936509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179510.936512] render error detected, EIR: 0x00000000 [179511.336509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179511.336512] render error detected, EIR: 0x00000000 [179512.136509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179512.136512] render error detected, EIR: 0x00000000 [179512.536509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179512.536511] render error detected, EIR: 0x00000000 [179513.336509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179513.336512] render error detected, EIR: 0x00000000 [179513.736510] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179513.736512] render error detected, EIR: 0x00000000 [179514.536509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179514.536512] render error detected, EIR: 0x00000000 [179514.936510] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179514.936513] render error detected, EIR: 0x00000000 [179515.736508] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179515.736511] render error detected, EIR: 0x00000000 [179516.140509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179516.140512] render error detected, EIR: 0x00000000 [179516.940509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179516.940511] render error detected, EIR: 0x00000000 [179517.340510] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179517.340512] render error detected, EIR: 0x00000000 [179518.140509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179518.140512] render error detected, EIR: 0x00000000 [179518.540509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179518.540512] render error detected, EIR: 0x00000000 [179519.340509] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [179519.340512] render error detected, EIR: 0x00000000