Attachment 25657 Details for Bug 21639 – dmesg

dmesg

dmesg (text/plain), 37.03 KB, created by Peter on 2009-05-09 03:14:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter

Created: 2009-05-09 03:14:58 UTC

Size: 37.03 KB

patch

obsolete

>Linux version 2.6.29-gentoo-r3 (root@tablet) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.1, pie-10.1.5) ) #2 SMP PREEMPT Sat May 9 13:34:35 MSD 2009
>Command line: root=/dev/sda2
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000099800 (usable)
> BIOS-e820: 0000000000099800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable)
> BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data)
> BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS)
> BIOS-e820: 000000007d700000 - 000000007e000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>DMI present.
>last_pfn = 0x7d6b0 max_arch_pfn = 0x100000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>Scanning 2 areas for low memory corruption
>modified physical RAM map:
> modified: 0000000000000000 - 0000000000001000 (usable)
> modified: 0000000000001000 - 0000000000006000 (reserved)
> modified: 0000000000006000 - 0000000000008000 (usable)
> modified: 0000000000008000 - 0000000000010000 (reserved)
> modified: 0000000000010000 - 000000000008c800 (usable)
> modified: 0000000000099800 - 00000000000a0000 (reserved)
> modified: 00000000000d6000 - 00000000000d8000 (reserved)
> modified: 00000000000e0000 - 0000000000100000 (reserved)
> modified: 0000000000100000 - 000000007d6b0000 (usable)
> modified: 000000007d6b0000 - 000000007d6cc000 (ACPI data)
> modified: 000000007d6cc000 - 000000007d700000 (ACPI NVS)
> modified: 000000007d700000 - 000000007e000000 (reserved)
> modified: 00000000f0000000 - 00000000f4000000 (reserved)
> modified: 00000000fec00000 - 00000000fec10000 (reserved)
> modified: 00000000fed00000 - 00000000fed00400 (reserved)
> modified: 00000000fed14000 - 00000000fed1a000 (reserved)
> modified: 00000000fed1c000 - 00000000fed90000 (reserved)
> modified: 00000000fee00000 - 00000000fee01000 (reserved)
> modified: 00000000ff000000 - 0000000100000000 (reserved)
>init_memory_mapping: 0000000000000000-000000007d6b0000
> 0000000000 - 007d600000 page 2M
> 007d600000 - 007d6b0000 page 4k
>kernel direct mapping tables up to 7d6b0000 @ 10000-14000
>last_map_addr: 7d6b0000 end: 7d6b0000
>ACPI: RSDP 000F6950, 0024 (r2 LENOVO)
>ACPI: XSDT 7D6BCD52, 0094 (r1 LENOVO TP-7S        1210  LTP        0)
>ACPI: FACP 7D6BCE00, 00F4 (r3 LENOVO TP-7S        1210 LNVO        1)
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/32 [20081204]
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 0/32 [20081204]
>ACPI Warning (tbfadt-0596): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20081204]
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT 7D6BD1DB, E940 (r1 LENOVO TP-7S        1210 MSFT  3000000)
>ACPI: FACS 7D6E4000, 0040
>ACPI: SSDT 7D6BCFB4, 0227 (r1 LENOVO TP-7S        1210 MSFT  3000000)
>ACPI: ECDT 7D6CBB1B, 0052 (r1 LENOVO TP-7S        1210 LNVO        1)
>ACPI: TCPA 7D6CBB6D, 0032 (r2 LENOVO TP-7S        1210 LNVO        1)
>ACPI: APIC 7D6CBB9F, 0068 (r1 LENOVO TP-7S        1210 LNVO        1)
>ACPI: MCFG 7D6CBC07, 003C (r1 LENOVO TP-7S        1210 LNVO        1)
>ACPI: HPET 7D6CBC43, 0038 (r1 LENOVO TP-7S        1210 LNVO        1)
>ACPI: SLIC 7D6CBDF0, 0176 (r1 LENOVO TP-7S        1210  LTP        0)
>ACPI: BOOT 7D6CBF66, 0028 (r1 LENOVO TP-7S        1210  LTP        1)
>ACPI: ASF! 7D6CBF8E, 0072 (r16 LENOVO TP-7S        1210 PTL         1)
>ACPI: SSDT 7D6E2697, 025F (r1 LENOVO TP-7S        1210 INTL 20050513)
>ACPI: SSDT 7D6E28F6, 00A6 (r1 LENOVO TP-7S        1210 INTL 20050513)
>ACPI: SSDT 7D6E299C, 04F7 (r1 LENOVO TP-7S        1210 INTL 20050513)
>ACPI: SSDT 7D6E2E93, 01D8 (r1 LENOVO TP-7S        1210 INTL 20050513)
>ACPI: DMI detected: Lenovo ThinkPad X61
>ACPI: Added _OSI(Linux)
>ACPI: Local APIC address 0xfee00000
>(5 early reservations) ==> bootmem [0000000000 - 007d6b0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 000085b538]    TEXT DATA BSS ==> [0000200000 - 000085b538]
>  #3 [0000099800 - 0000100000]    BIOS reserved ==> [0000099800 - 0000100000]
>  #4 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[4] active PFN ranges
>    0: 0x00000000 -> 0x00000001
>    0: 0x00000006 -> 0x00000008
>    0: 0x00000010 -> 0x0000008c
>    0: 0x00000100 -> 0x0007d6b0
>On node 0 totalpages: 513583
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1734 pages reserved
>  DMA zone: 2177 pages, LIFO batch:0
>  DMA32 zone: 6968 pages used for memmap
>  DMA32 zone: 502648 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 0000000000001000 - 0000000000006000
>PM: Registered nosave memory: 0000000000008000 - 0000000000010000
>PM: Registered nosave memory: 000000000008c000 - 000000000009a000
>PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d6000
>PM: Registered nosave memory: 00000000000d6000 - 00000000000d8000
>PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
>NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Allocating 49152 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 504825
>Kernel command line: root=/dev/sda2
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 1596.024 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>No AGP bridge found
>Memory: 2015080k/2054848k available (3717k kernel code, 516k absent, 38632k reserved, 1840k data, 344k init)
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.05 BogoMIPS (lpj=5320080)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20081204
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     L7500  @ 1.60GHz stepping 0b
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3193.06 BogoMIPS (lpj=5320098)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     L7500  @ 1.60GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 261008 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>Total of 2 processors activated (6386.11 BogoMIPS).
>net_namespace: 968 bytes
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>dca service started, version 1.8
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: BIOS _OSI(Linux) query honored via DMI
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: ACPI Dock Station Driver: 3 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff]
>pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
>pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
>pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff]
>pci 0000:00:03.0: reg 10 64bit mmio: [0xfe226800-0xfe22680f]
>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.0: PME# disabled
>pci 0000:00:03.2: reg 10 io port: [0x1828-0x182f]
>pci 0000:00:03.2: reg 14 io port: [0x180c-0x180f]
>pci 0000:00:03.2: reg 18 io port: [0x1820-0x1827]
>pci 0000:00:03.2: reg 1c io port: [0x1808-0x180b]
>pci 0000:00:03.2: reg 20 io port: [0x1810-0x181f]
>pci 0000:00:03.3: reg 10 io port: [0x1830-0x1837]
>pci 0000:00:03.3: reg 14 32bit mmio: [0xfe224000-0xfe224fff]
>pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff]
>pci 0000:00:19.0: reg 14 32bit mmio: [0xfe225000-0xfe225fff]
>pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe220000-0xfe223fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
>pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 20 io port: [0x18e0-0x18ef]
>pci 0000:00:1f.2: reg 10 io port: [0x1c30-0x1c37]
>pci 0000:00:1f.2: reg 14 io port: [0x1c24-0x1c27]
>pci 0000:00:1f.2: reg 18 io port: [0x1c28-0x1c2f]
>pci 0000:00:1f.2: reg 1c io port: [0x1c20-0x1c23]
>pci 0000:00:1f.2: reg 20 io port: [0x1c00-0x1c1f]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff]
>pci 0000:00:1f.3: reg 20 io port: [0x1c40-0x1c5f]
>pci 0000:02:00.0: reg 10 32bit mmio: [0xdfcffc00-0xdfcfffff]
>pci 0000:02:00.0: reg 18 io port: [0x2000-0x207f]
>pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
>pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
>pci 0000:00:1c.0: bridge 32bit mmio: [0xdc100000-0xdfcfffff]
>pci 0000:00:1c.0: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff]
>pci 0000:03:00.0: reg 10 64bit mmio: [0xfdf00000-0xfdf01fff]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
>pci 0000:00:1c.1: bridge 32bit mmio: [0xfc000000-0xfdffffff]
>pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf8000000-0xf80fffff]
>pci 0000:05:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff]
>pci 0000:05:00.0: supports D1 D2
>pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:00.0: PME# disabled
>pci 0000:05:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff]
>pci 0000:05:00.1: supports D1 D2
>pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:00.1: PME# disabled
>pci 0000:05:00.2: reg 10 32bit mmio: [0xf8301800-0xf83018ff]
>pci 0000:05:00.2: supports D1 D2
>pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:00.2: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0x4000-0x7fff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff]
>pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff has been reserved
>system 00:00: iomem range 0xc4000-0xc7fff has been reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff has been reserved
>system 00:00: iomem range 0xd0000-0xd3fff has been reserved
>system 00:00: iomem range 0xd4000-0xd7fff could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x7dffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
>system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
>system 00:02: ioport range 0x164e-0x164f has been reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x800-0x80f has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x165f could not be reserved
>system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
>system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1c.0:   MEM window: 0xdc100000-0xdfcfffff
>pci 0000:00:1c.0:   PREFETCH window: 0x000000dfe00000-0x000000dfefffff
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
>pci 0000:00:1c.1:   MEM window: 0xfc000000-0xfdffffff
>pci 0000:00:1c.1:   PREFETCH window: 0x000000f8000000-0x000000f80fffff
>pci 0000:05:00.0: CardBus bridge, secondary bus 0000:06
>pci 0000:05:00.0:   IO window: 0x004000-0x0040ff
>pci 0000:05:00.0:   IO window: 0x004400-0x0044ff
>pci 0000:05:00.0:   PREFETCH window: 0xf4000000-0xf7ffffff
>pci 0000:05:00.0:   MEM window: 0x80000000-0x83ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:1e.0:   IO window: 0x4000-0x7fff
>pci 0000:00:1e.0:   MEM window: 0xf8300000-0xfbffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000f4000000-0x000000f7ffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1e.0: enabling device (0005 -> 0007)
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:02: resource 1 mem: [0xdc100000-0xdfcfffff]
>pci_bus 0000:02: resource 2 mem: [0xdfe00000-0xdfefffff]
>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 io:  [0x3000-0x3fff]
>pci_bus 0000:03: resource 1 mem: [0xfc000000-0xfdffffff]
>pci_bus 0000:03: resource 2 mem: [0xf8000000-0xf80fffff]
>pci_bus 0000:03: resource 3 mem: [0x0-0x0]
>pci_bus 0000:05: resource 0 io:  [0x4000-0x7fff]
>pci_bus 0000:05: resource 1 mem: [0xf8300000-0xfbffffff]
>pci_bus 0000:05: resource 2 mem: [0xf4000000-0xf7ffffff]
>pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:06: resource 0 io:  [0x4000-0x40ff]
>pci_bus 0000:06: resource 1 io:  [0x4400-0x44ff]
>pci_bus 0000:06: resource 2 mem: [0xf4000000-0xf7ffffff]
>pci_bus 0000:06: resource 3 mem: [0x80000000-0x83ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Simple Boot Flag at 0x35 set to 0x1
>Scanning for low memory corruption every 60 seconds
>msgmni has been set to 3936
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered (default)
>io scheduler cfq registered
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
>Linux agpgart interface v0.103
>ACPI: AC Adapter [AC] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: SSDT 7D6E1D72, 0282 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT 7D6E2079, 061E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7D6E1CAA, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT 7D6E1FF4, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (51 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [THM1] (51 C)
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial 00:0a: activated
>00:0a: ttyS0 at I/O 0x200 (irq = 5) is a NS16550A
>serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>0000:00:03.3: ttyS1 at I/O 0x1830 (irq = 17) is a 16550A
>brd: module loaded
>loop: module loaded
>e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:72:8c:4e:ff
>0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
>iwlagn: Copyright(c) 2003-2008 Intel Corporation
>iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwlagn 0000:03:00.0: setting latency timer to 64
>iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
>iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
>iwlagn 0000:03:00.0: PCI INT A disabled
>wmaster0 (iwlagn): not using net_device_ops yet
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>wlan0 (iwlagn): not using net_device_ops yet
>Driver 'sd' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 27
>ata2: DUMMY
>ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 27
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: ATA-8: HITACHI HTS542516K9SA00, BBCZC3HP, max UDMA/133
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/133
>ata1.00: configured for UDMA/133
>ata1: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54251 BBCZ PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata3: SATA link down (SStatus 0 SControl 300)
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
>ata5: port disabled. ignoring.
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.29-gentoo-r3 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.29-gentoo-r3 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.29-gentoo-r3 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.29-gentoo-r3 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.29-gentoo-r3 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.29-gentoo-r3 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>usbcore: registered new interface driver wacom
>wacom: v1.49:USB Wacom Graphire and Wacom Intuos tablet driver
>rtc_cmos 00:07: RTC can wake from S4
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>hdaps: inverting axis readings.
>hdaps: LENOVO ThinkPad X61 detected.
>input: hdaps as /devices/platform/hdaps/input/input3
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>hdaps: driver successfully loaded.
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Advanced Linux Sound Architecture Driver Version 1.0.18a.
>HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ALSA device list:
>  #0: HDA Intel at 0xfe220000 irq 17
>TCP cubic registered
>NET: Registered protocol family 17
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>rtc_cmos 00:07: setting system clock to 2009-05-09 13:40:14 UTC (1241876414)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
>Freeing unused kernel memory: 344k freed
>usb 3-1: New USB device found, idVendor=0483, idProduct=2016
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: Biometric Coprocessor
>usb 3-1: Manufacturer: STMicroelectronics
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-2: new full speed USB device using uhci_hcd and address 3
>usb 3-2: New USB device found, idVendor=0a5c, idProduct=2110
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: BCM2045B
>usb 3-2: Manufacturer: Broadcom Corp
>usb 3-2: configuration #1 chosen from 1 choice
>udev: starting version 141
>acpi device:03: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input6
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>Bluetooth: Core ver 2.14
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>firewire_ohci 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>firewire_ohci: Added fw-ohci device 0000:05:00.1, OHCI version 1.10
>[drm] Initialized drm 1.1.0 20060810
>Bluetooth: Generic Bluetooth USB driver ver 0.4
>usbcore: registered new interface driver btusb
>yenta_cardbus 0000:05:00.0: CardBus bridge found [17aa:20c6]
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>pci 0000:00:02.0: power state changed by ACPI to D0
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
>yenta_cardbus 0000:05:00.0: Socket status: 30000006
>yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
>yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
>yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 21)
>sdhci-pci 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>sdhci-pci 0000:05:00.2: setting latency timer to 64
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
>pci 0000:00:02.0: irq 28 for MSI/MSI-X
>Non-volatile memory driver v1.3
>firewire_core: created device fw0: GUID 001d72ffff8c4eff, S400
>thinkpad_acpi: ThinkPad ACPI Extras v0.22
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7SET35WW (1.21 ), EC 7RHT16WW-1.02
>thinkpad_acpi: Lenovo ThinkPad X61 Tablet, model 7762WHW
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi:orange:batt
>Registered led device: tpacpi:green:batt
>Registered led device: tpacpi::dock_active
>Registered led device: tpacpi::bay_active
>Registered led device: tpacpi::dock_batt
>Registered led device: tpacpi::unknown_led
>Registered led device: tpacpi::standby
>thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
>input: ThinkPad Extra Buttons as /devices/virtual/input/input7
>allocated 1400x1050 fb: 0x007df000, bo ffff88007d3f4b40
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ReiserFS: sda5: found reiserfs format "3.6" with standard journal
>ReiserFS: sda5: using ordered data mode
>ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda5: checking transaction log (sda5)
>ReiserFS: sda5: Using r5 hash to sort names
>ReiserFS: sda9: found reiserfs format "3.6" with standard journal
>ReiserFS: sda9: using ordered data mode
>ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda9: checking transaction log (sda9)
>ReiserFS: sda9: Using r5 hash to sort names
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 2870, dev sda11:8, commit interval 5 seconds
>EXT4 FS on sda11, internal journal on sda11:8
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem sda11 with ordered data mode
>hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x020b2000
>Clocksource tsc unstable (delta = -92488680 ns)
>iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106)
>iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
>iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
>iwlagn loaded firmware version 228.57.2.23
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>wlan0: direct probe to AP 00:18:f3:60:0c:fd try 1
>wlan0 direct probe responded
>wlan0: authenticate with AP 00:18:f3:60:0c:fd
>wlan0: authenticated
>wlan0: associate with AP 00:18:f3:60:0c:fd
>wlan0: RX AssocResp from 00:18:f3:60:0c:fd (capab=0x11 status=0 aid=2)
>wlan0: associated
>wlan0: authenticate with AP 00:18:f3:60:0c:fd
>wlan0: authenticated
>wlan0: associate with AP 00:18:f3:60:0c:fd
>wlan0: RX ReassocResp from 00:18:f3:60:0c:fd (capab=0x11 status=0 aid=2)
>wlan0: associated
>[drm] LVDS-8: set mode 1400x1050 14

Actions: View

Attachments on bug 21639: 25656 | 25657

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.